Central Highlands Fabrications

Call Directions Website Contact the business

Central Highlands Fabrications Proudly locally owned, CHF has been in operation since 1998.

At our core, we are committed to providing fabrication & onsite services that are specifically designed to meet the diverse needs of our clients.

When it rains, it pours! 🌧️It’s been a challenging few days for our site crew installing Chiller Ductwork.This system wi...
29/10/2026

When it rains, it pours! 🌧️

It’s been a challenging few days for our site crew installing Chiller Ductwork.

This system will deliver chilled air underground, with a 70kpa rated knifegate allowing the shaft to be isolated when required.

Despite battling wet weather and multiple shutdowns due to lightning TARPs over the three-day installation, the team pushed through.

Thanks to solid planning, an experienced crew and great teamwork, the job was completed on time and incident-free.

A fantastic effort by everyone involved, especially under some pretty testing conditions.

Well done, boys! 👏

Finally with a break in the weather, the first three trucks of Bulk Air Conditioner Ductwork are out the gate and headin...
26/10/2026

Finally with a break in the weather, the first three trucks of Bulk Air Conditioner Ductwork are out the gate and heading to Oaky Creek.
If the weather gods are good to us, the boys will have this installed by Thursday

Throwback Thursday!There’s not many times we are assembling ducting while the shaft liners are still being installed. We...
06/05/2026

Throwback Thursday!
There’s not many times we are assembling ducting while the shaft liners are still being installed. We worked side by side with ASD on this one as we had a tight deadline to meet. With great planning and communication between all work parties, this project was completed on time and incident free.

It’s great when a plan comes together. On Tuesday we installed a new wash down ramp for Aquila Mine. This project ran se...
08/04/2026

It’s great when a plan comes together.
On Tuesday we installed a new wash down ramp for Aquila Mine. This project ran seamlessly from our 3D scan of the original ramp, through to design, fabrication, paint, galvanising and installation. The install was completed in a single shift, incident free which is a credit to the whole team.

Applications are now open.  Check the comments section for further information.
18/02/2026

Applications are now open. Check the comments section for further information.

13/02/2026

Boys laying it down on a Saturday morning!

It’s always great doing repeat work for clients. Another air receiver skid on its way to a localmine site.
08/02/2026

It’s always great doing repeat work for clients.
Another air receiver skid on its way to a local
mine site.

Busy morning in the workshop loading trucks. Four truck loads out the gate with another load ready to go.
02/02/2026

Busy morning in the workshop loading trucks.
Four truck loads out the gate with another load ready to go.

We’ve had a busy start to the year on-site with a few shut downs between the rain.  Our first week back we were involved...
22/01/2026

We’ve had a busy start to the year on-site with a few shut downs between the rain.
Our first week back we were involved in the upgrade of a Vacuum Pump Station at Mornabah. The boys dismantled a shed and removed the old switchboards. We then landed and welded the new switch room into position. We hope everyone has a great 2026!

Address

1 Nightingale Court
Capella, QLD
4723

Opening Hours

Monday 6am - 5pm
Tuesday 6am - 5pm
Wednesday 6am - 5pm
Thursday 6am - 5pm
Friday 6am - 4pm

Telephone

+61749864012

Alerts

Be the first to know and let us send you an email when Central Highlands Fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Central Highlands Fabrications:

Shortcuts

Share


Other Metal Fabricators in Capella

Show All