Trojan Fibreglass

Trojan Fibreglass Trojan Fibreglass is an Australian owned private company who manufactures and supplies resins and composite materials throughout Australia and the world

Our resins are used in many composite applications such as swimming pools, fishing boats, yachts, chemical tanks and mining. We use the highest quality materials and follow a strict ISO 9001 quality system to ensure our products are consistent and reliable every time. At Trojan Fibreglass we have a onsite trade store to service the needs of tradesman and the general public. Our resins and fibregla

ss materials are available to everyone. Head into our trade store for expert advice from our sales team. With over a 60 years of combined fibreglass industry experience we can help you with any fibreglass project.

A small bonding job on the bench? Trojan 650 Series Epoxy 5 Minute Adhesive is a two-part, general-purpose adhesive mixe...
07/09/2026

A small bonding job on the bench? Trojan 650 Series Epoxy 5 Minute Adhesive is a two-part, general-purpose adhesive mixed 1:1 by volume. Both Part A and Part B are included in the online kits.

Have everything ready before mixing: the listed pot life is approximately five minutes, with temperature affecting working time. Check the product directions and suitability for your materials.

https://buff.ly/bZBhHDf

That red line has a purpose. PA85/66 Red Tracer Peel Ply is easy to identify in a laminate, while its drapable nylon wea...
06/09/2026

That red line has a purpose. PA85/66 Red Tracer Peel Ply is easy to identify in a laminate, while its drapable nylon weave follows the job’s contours. After curing, the peel ply strips away to leave a fine-textured surface, helping reduce hand-finishing time.

Available by the metre, 1000mm wide: https://buff.ly/lBGshWF

Let the timber grain—or your next resin-art idea—take centre stage. Trojan 1000 Series High Clarity Epoxy Resin is a cle...
06/09/2026

Let the timber grain—or your next resin-art idea—take centre stage. Trojan 1000 Series High Clarity Epoxy Resin is a clear, low-viscosity system used for resin art, timber coatings and fibre laminating.

Planning an outdoor clear finish? This resin is not UV stable in direct sunlight; Trojan recommends a suitable UV-stable two-part polyurethane coating for protection. Review the product directions before starting.

https://buff.ly/MdKo3aL

Four widths, one useful addition to your workshop kit. Trojan Fibreglass’s four-piece Plastic Applicator set includes 50...
05/09/2026

Four widths, one useful addition to your workshop kit. Trojan Fibreglass’s four-piece Plastic Applicator set includes 50mm, 80mm, 100mm and 120mm scrapers, so you can choose a width to suit the area you’re working on.

Add it to your next project’s supplies list: https://buff.ly/7i5CACD

A handy way to tackle a small epoxy repair—or try epoxy before a bigger project. The Trojan Fibreglass Epoxy Resin Small...
05/09/2026

A handy way to tackle a small epoxy repair—or try epoxy before a bigger project. The Trojan Fibreglass Epoxy Resin Small Repair / Starter Kit includes Part A and Part B resin, mixing sticks, ratio cups, gloves and a foam brush. Suitable for small marine, automotive and home applications. Available online:

https://buff.ly/u5QFrSu

Strong, light and finished with that unmistakable twill pattern. Trojan Fibreglass Carbon Fibre Cloth Twill Weave is 200...
04/09/2026

Strong, light and finished with that unmistakable twill pattern. Trojan Fibreglass Carbon Fibre Cloth Twill Weave is 200gm/m² and 1000mm wide, with excellent compatibility across epoxy, vinyl ester and polyester resin systems. Ideal for performance parts, marine work, motorsport and premium cosmetic finishes.

https://trojanfibreglass.com.au/product/200gm-carbon-fibre-twill-1000mm/

Simplify vacuum infusion with a core that does two jobs. Lantor Soric® SF acts as both a lightweight structural core and...
03/09/2026

Simplify vacuum infusion with a core that does two jobs. Lantor Soric® SF acts as both a lightweight structural core and an integrated resin flow medium, helping distribute resin evenly while maintaining thickness under vacuum. Flexible enough for curved moulds and complex shapes.

https://trojanfibreglass.com.au/product/soric-coremat-sf-2mm-2/

Need stiffness without loading up weight? TROJAN MAXX CORE PVC Foam Core is a closed-cell, cross-linked foam with a stro...
03/09/2026

Need stiffness without loading up weight? TROJAN MAXX CORE PVC Foam Core is a closed-cell, cross-linked foam with a strong strength-to-weight ratio, negligible water absorption, chemical resistance and compatibility with epoxy, polyester and vinyl ester systems. Available in several sheet thicknesses for sandwich-composite projects.

Shipping note: online sheets are cut in half to reduce transport costs; contact Trojan Fibreglass if you need a full uncut sheet.

https://trojanfibreglass.com.au/product/trojan-maxx-core-pvc-foam-core-1150-x-2330-cut-in-half/

Building a composite project starts with understanding each layer. Trojan Fibreglass has a dedicated Core Materials cate...
02/09/2026

Building a composite project starts with understanding each layer. Trojan Fibreglass has a dedicated Core Materials category in its online store, giving customers a clear place to browse the current range before planning their next job.

https://buff.ly/Q82o2vq

Address

18-20 Torrens Avenue
Cardiff, NSW
2285

Opening Hours

Monday 8:30am - 4:30pm
Tuesday 8:30am - 4:30pm
Wednesday 8:30am - 4:30pm
Thursday 8:30am - 4:30pm
Friday 8:30am - 4:30pm

Telephone

0249426940

Website

Alerts

Be the first to know and let us send you an email when Trojan Fibreglass posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Trojan Fibreglass:

Shortcuts

Share