Formed by Penny Royal

25/08/2026

28/07/2026

22/06/2026

Brass mesh cabinetry doors - Caulfield North
Melbourne Architectural Custom Builder - cjh____________studio

50mm face frame. Aged brass mesh. Colour-matched 2pac substrate. Rebated finger pulls to the bottom edge — nothing on the face to interrupt it.

14/05/2026

Solid 10mm brass floating shelf, fabricated for

Made from solid brass plate, welded into a tee section with countersunk fixing holes to align with the wall studs.

Finished in an aged brass patina, giving the piece a softer, lived in finish while still keeping the clean, solid form.

04/05/2026

A small brass table recently completed and sent out

Fabricated from 1.6mm brass, wrapped over a laminate substrate with a bolt-on leg detail. Finished with a hand-applied patina to tie in with the iron bronze finish by .

21/04/2026

This blackened stainless rangehood, paired with matching handles and an island frame, was fabricated as a full package for a new build in Ballarat. Keeping the material consistent across each element allows the detail to carry through the entire space without competing for attention.

The blackened finish brings depth and variation, shifting subtly depending on the light and angle, while the fully welded and polished construction keeps everything clean and seamless.

Made to order.
Fabricated in house.
Shipped Australia wide.

17/04/2026

Patinated brass cabinetry legs with a soft, aged finish and natural tonal variation.

Designed as a brass cladding over timber to keep things clean, precise, and consistent on install.
A subtle detail, but one that completely lifts the overall feel.

08/04/2026

Settled into its new home.

This aged bronze rangehood now sits alongside matching aged bronze bench edging and a circular island leg, bringing the entire space together.

Both the edging and island leg were fully welded and flushed back to achieve a completely seamless finish. A considered approach that keeps the detailing refined and lets the material do the talking.

Cabinetry by .cabinetry bringing the full vision together.

Made to order.
Fabricated in house.
Shipped Australia wide.

31/03/2026

Workshop floor moments. Where the details come together.

This oversized rangehood recently fabricated features our signature radiused corners, paired with a fully welded and polished base for a seamless finish.

Due to the scale of this piece it could not be wrapped in a single sheet, so a couple of vertical shadow lines were introduced. A considered detail that not only solves the fabrication challenge, but adds another subtle feature to the overall design.

Stay tuned to see the finished result…

Made to order.
Fabricated in house.
Shipped Australia wide.

Not something you see every day.

27/03/2026

Matched by hand. Refined by experience.

This hand patinaed brass surface was carefully developed to match a custom supplied sample, working through layers, tone and texture until the finish felt just right.

Every piece we produce is hand finished in house, allowing us to collaborate closely with clients, architects and designers to achieve the exact look they are chasing.

Because no two projects should feel the same, and the best finishes are never off the shelf.

Made to order
Hand finished in house
Shipped Australia wide