Industrial Laser Soultions

Industrial Laser Soultions At Industrial Laser Solutions, we're laser-focused on helping businesses succeed.

We're the leading provider of cutting-edge laser cutting technology, offering sales, service, and support for a wide range of industries. Industrial Laser is a privately owned company established in 1998 in Melbourne, Australia to support Australian and New Zealand laser users with expert and factor-trained engineers. As market demands changed, so too did Industrial Laser, firstly to develop and m

anufacture specialised laser equipment where off-the-shelf models were not appropriate, then by adopting new laser technologies and processes as they emerged. Today, Industrial Laser sells and services (both the laser and the machine it is on) CO2 lasers, Fibre lasers and Nd:Yag lasers for cutting, welding, cladding, engraving, marking and additive manufacturing. The newer fiber laser technologies have opened up opportunities in nano manufacturing and scientific research. Our sole agencies include some of the top suppliers in the world, including the fastesst growing area today - fiber lasers.We are proud to represent PRC, Cincinnati, Precitec, IPG, Laser SOS, Lasit, APC Optics, Laser Beam Products & Primes. Industrial Laser places a heavy emphasis on its service ability, reputation and knowledge as a platform on which to retain and build on it's customer base.

650 laser installations across Australia.Most of those customers haven't heard from us recently. Some are still running ...
04/08/2026

650 laser installations across Australia.

Most of those customers haven't heard from us recently. Some are still running the machine we installed. Some have upgraded. Some are running a different brand now and getting inadequate service from the people who sold it.

All of them should be in a conversation with ILS.

If you had an ILS installation — whether that was two years ago or fifteen — reach out. We should be talking about where your equipment is now and where it needs to go.

👉 www.industriallaser.com.au/laser-machine-services


https://www.industriallaser.com.au/laser-machine-services

Laser safety isn't just about what happens when something goes wrong. It's about what your team does every single shift....
03/08/2026

Laser safety isn't just about what happens when something goes wrong. It's about what your team does every single shift.

The beam path respected without being reminded. The access controls in place before every run. The PPE worn consistently, not just when a visitor is on the floor.

That standard comes from training, procedure, and accountability — not from putting a sign on the door.

ILS supplies certified laser safety equipment. We also help establish the procedures behind it 👇
www.industriallaser.com.au/laser-cutting-machine-safety


https://www.industriallaser.com.au

First quarter of FY2027 is when equipment decisions made in July and August start running.The fabricators who ordered in...
02/08/2026

First quarter of FY2027 is when equipment decisions made in July and August start running.

The fabricators who ordered in July will be commissioning in September. Running production in October. Recovering capital through output in Q2.

The ones who waited until October to decide are commissioning in January — if lead times hold.

One quarter difference in the start date compounds across the financial year.

If you're making an equipment decision this FY, earlier is better. Talk to ILS 👇
www.industriallaser.com.au/about-us/contact-us


https://www.industriallaser.com.au/about-us/contact-us

Australia's manufacturing skills gap is a real constraint — but it's not unsolvable.The answer isn't to wait for the tra...
01/08/2026

Australia's manufacturing skills gap is a real constraint — but it's not unsolvable.

The answer isn't to wait for the training pipeline to catch up. It's to invest in technology that produces consistent results with a shorter learning curve.

LightWELD puts quality welding results in the hands of a less experienced operator within days. CNC press brakes with angle verification reduce bending errors from setup variation. Automated laser loading removes the dependency on a skilled sheet metal handler for overnight runs.

The gap between available skills and required output gets closed with the right equipment 👇
www.industriallaser.com.au/about-us/contact-us


https://www.industriallaser.com.au/about-us/contact-us

ILS from the inside: what the Hallam workshop actually does.Cutting head inspection, cleaning, and rebuild. LightWELD sy...
31/07/2026

ILS from the inside: what the Hallam workshop actually does.

Cutting head inspection, cleaning, and rebuild. LightWELD system service and repair. Precitec optics replacement with genuine components. Consumable stocking for same-day dispatch. Service job management across Australia and New Zealand.

It's not a showroom. It's a working service operation — which is why the response when your machine goes down is based on actual capability, not promises.

👉 www.industriallaser.com.au/laser-machine-services


https://www.industriallaser.com.au/laser-machine-services

Winter energy bills are a real operating cost. Your press brake is part of the equation.A conventional hydraulic press b...
30/07/2026

Winter energy bills are a real operating cost. Your press brake is part of the equation.

A conventional hydraulic press brake runs its pump motor continuously — whether the machine is bending or not. In a cold July workshop, that's constant energy draw plus hydraulic fluid that takes longer to reach operating viscosity.

The Ermaksan Green Press FX Servo draws power only during the working stroke. No continuous motor. No hydraulic warm-up time. Energy consumption down by up to 69%.

Over a year of multi-shift operation, that difference is real money 👇
www.industriallaser.com.au/ermaksan-press-brakes


https://www.industriallaser.com.au/ermaksan-press-brakes

Renewable energy infrastructure is Australia's fastest-growing fabrication market.Solar mounting structures need precise...
29/07/2026

Renewable energy infrastructure is Australia's fastest-growing fabrication market.

Solar mounting structures need precise laser-cut components at volume. Wind tower base sections need heavy press brake capacity. Green hydrogen electrolyser frames need controlled-heat stainless and titanium welding.

The technology requirements of the clean energy sector map directly onto what ILS supplies — fibre laser cutting, press brakes, and LightWELD for the welding applications where heat input and distortion control matter.

ILS supports renewable energy fabricators across Australia 👇
www.industriallaser.com.au


https://www.industriallaser.com.au

Commercial kitchen and food processing fabrication has a weld quality requirement most people don't think about until co...
28/07/2026

Commercial kitchen and food processing fabrication has a weld quality requirement most people don't think about until compliance comes up.

Hygienic design standards require weld beads that are smooth, continuous, and cleanable. Pinholes, undercut, and spatter create bacterial harbouring points that fail a food safety audit.

LightWELD stainless welding produces a consistent, narrow bead with minimal spatter — specifically the kind of weld finish that makes hygiene compliance straightforward, not a rework exercise.

👉 www.industriallaser.com.au/ipg-range-ipg-lightweld


https://www.industriallaser.com.au/ipg-range-ipg-lightweld

End-to-end laser workflow: the shops that run cleanest are the ones that connect the processes.DMK DPL laser clean the m...
27/07/2026

End-to-end laser workflow: the shops that run cleanest are the ones that connect the processes.

DMK DPL laser clean the material before it goes on the table. HSG fibre laser cuts it to geometry. IPG LightWELD welds the assembly. LightWELD XR cleans the finished weld.

Every step is laser-based. No solvents, no grinding, no abrasive finishing between processes. Clean inputs, clean outputs, consistent result.

ILS supplies and supports every step of that workflow 👇
www.industriallaser.com.au


https://www.industriallaser.com.au

Your laser cutting parameter library is a business asset — treat it like one.The parameters your engineers have refined ...
26/07/2026

Your laser cutting parameter library is a business asset — treat it like one.

The parameters your engineers have refined over two years of production represent accumulated process knowledge: which settings produce clean edges on your specific materials, which pierce sequences avoid micro-cracks on your thicker plate, which gas pressures hold quality through a long overnight run.

That library lives in the controller. When the machine is replaced or upgraded, it's at risk.

ILS backs up and migrates parameter libraries as part of machine upgrade projects 👇
www.industriallaser.com.au/laser-machine-services


https://www.industriallaser.com.au/laser-machine-services

Address

Factory 8, 17~23 Keppel Drive
Hallam, VIC
3803

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+61397963055

Website

Alerts

Be the first to know and let us send you an email when Industrial Laser Soultions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share