MSF Engineering

MSF Engineering We are a family run engineering shop. Get in contact with us today.

Specialising in mild steel, aluminium and stainless steel fab.
- Mobile welding trailer
- CNC Plazma cutting
- Heavy and light fabrication
- Machining
No job to big or small.

Another custom aluminium canopy out the door for Klint and his family. This build had it all. Itech mini boss and 200AH ...
25/07/2026

Another custom aluminium canopy out the door for Klint and his family. This build had it all. Itech mini boss and 200AH battery, roof top tent mounts, upright fridge box, slide out pantry, custom built draws and shelves, stedi rock lights in roof and doors, spare tyre holder and a jerry can holder. If you’re in the market for a custom built AUSSIE canopy get in touch with us today !!

Finished off this full toolbox canopy setup for a Chev 2500 at JSM Ag repairs. There’s not much this box doesn’t have. D...
21/07/2026

Finished off this full toolbox canopy setup for a Chev 2500 at JSM Ag repairs. There’s not much this box doesn’t have. Designed to lift on and off with fork pockets built in. Colour coded accessories. Stedi rock lights installed in doors and across the rear for work lights. Slide out work bench and 14 full length draws. Tall boy air compressor and hose real mounted inside. If this is something you’re looking for get in contact with us today.

Been a busy couple of months with plenty of different jobs coming through the door. - Machining- CNC plasma cutting - CN...
14/06/2026

Been a busy couple of months with plenty of different jobs coming through the door.

- Machining
- CNC plasma cutting
- CNC folding
- General steel fabrication
- Trailers
- Trays
- Canopies
- Gates and fencing

No job to big or small. Get in contact with us today.

Decked this cruiser out last week. This build had all the bells and whistles including :- Headboard fuel tank 60 litres....
14/06/2026

Decked this cruiser out last week. This build had all the bells and whistles including :

- Headboard fuel tank 60 litres.
- 2 x under tray boxes.
- Trundle draw.
- Stedi work lights and reverse lights.
- 1200 alloy canopy with stedi rock lights.
- Colour coded doors.

If this is something you are looking for get in contact with us today !!

Recently completed this custom aluminium canopy/dog box build for Chev 2500. Powder coated in aztec silver. If your afte...
08/06/2026

Recently completed this custom aluminium canopy/dog box build for Chev 2500. Powder coated in aztec silver. If your after a custom built like this get in contact with us today !!

Knocked this custom alloy canopy out for Zac this week. This canopy has it all with a 95 litre fridge slide, clear view ...
28/03/2026

Knocked this custom alloy canopy out for Zac this week. This canopy has it all with a 95 litre fridge slide, clear view kitchen on slides, 2 full length draws, shelves, roof top tent mounted, jerry can holder and a spare tyre holder. Powder coated in texture black with silver doors to match the ute. If this is something your after get in touch with us today.

Tricked up this cut back 200 series cruiser. This build has it all. 4 inch headboard, 80 litre headboard fuel tank, 40 l...
05/03/2026

Tricked up this cut back 200 series cruiser. This build has it all. 4 inch headboard, 80 litre headboard fuel tank, 40 litre stainless steel water tank, 900 trundle draw, under tray toolboxes and a 4 bay dog box. If you are interested in anything we fabricate get in contact with us today !!

Finished this dual dog box/canopy off this week for Zach. This box has everything. Center section has swing in/out doors...
27/02/2026

Finished this dual dog box/canopy off this week for Zach. This box has everything. Center section has swing in/out doors. Rear box has removable swinging divider. Front canopy has fridge slide and shelving. Spare tyre holder on the back and reinforced roof to bolt roof top camper on. Canvas door covers for weather protection. If this is something your after get in contact today.

Knocked out a WA500 bucket reskin a while back. Rolled out of 12mm biz 400. Plasma cut protection plate to stop the head...
23/02/2026

Knocked out a WA500 bucket reskin a while back. Rolled out of 12mm biz 400. Plasma cut protection plate to stop the heads of the bolts wearing off the cutting edge. Wafer choccy blocks along the bevel on bucket lip for extra wear protection and increased lip life. All mobile on site welding available. If you’re after a job done get in contact with us today !!

Here’s a couple of photos of a steel canopy we custom build for Bob. This canopy has roof racks, tie down point in the b...
18/02/2026

Here’s a couple of photos of a steel canopy we custom build for Bob. This canopy has roof racks, tie down point in the back to utilise the rest of the tray and a removable toolbox/fridge slide skid that bolts into the canopy. Available in steel or aluminium. If this is something that interests you get in contact with us today.

Address

Lidsdale, NSW
2790

Telephone

+61447827752

Website

Alerts

Be the first to know and let us send you an email when MSF Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MSF Engineering:

Shortcuts

Share

Category