Artistic Blacksmith Studio

Call Directions Website Contact the business

Artistic Blacksmith Studio The profile picture on my page being work of the late Rick Howard. It is the Elvis Presley Memorial, located in the Botanical gardens, Adelaide. Sth Aust.

And another addition to the already overloaded tool box. Not often do we come across knife makers tongs. 6mm -32mm
09/10/2026

And another addition to the already overloaded tool box.
Not often do we come across knife makers tongs. 6mm -32mm

I picked up this handy little Tinmans Spinning Jenny made by Alex Mathieson and Sons, Glasgow. It will certainly make my...
09/10/2026

I picked up this handy little Tinmans Spinning Jenny made by Alex Mathieson and Sons, Glasgow.
It will certainly make my life a lot easier to swage lips on disks.
I've been wanting one of these for longer than I can recall.
A full restoration is planned.

So I have now polished this door pull toa point of zero hammer marks. Being 316 marine grade Stainless steel, it is now...
29/09/2026

So I have now polished this door pull to
a point of zero hammer marks.
Being 316 marine grade Stainless steel, it is now off to the chemical cleaners and polishing to a satin finish to rid the risk of carbon steel contamination.

Colour coded tongs for the trainees. Finally purchased all these tongs to hold each of the stock sizes I use in the trai...
26/09/2026

Colour coded tongs for the trainees.
Finally purchased all these tongs to hold each of the stock sizes I use in the training courses.

16 years or older. Want to learn the basics to enable you to move hot metal to where you intend it to go. (Instead of where it happens to go).
Email me at [email protected] for an information pack.
Training takes place at Edinburgh SA not at my forge.

My Adelaide show entries for 2026.
26/09/2026

My Adelaide show entries for 2026.

Making good progress. A fancy door handle soon to go to Melbourne. 10mm and 12 mm 316 grade Stainless steel. Definitely ...
07/09/2026

Making good progress. A fancy door handle soon to go to Melbourne.
10mm and 12 mm 316 grade Stainless steel.
Definitely not as easy as it looks.
You can’t see the pattern I am following as it’s hidden beneath the letters only the push bars are visible on the drawing.

Reminiscing. Making a bunch of these tension held foot rail stands. Weathering the test of down trodden time. Made for R...
09/07/2026

Reminiscing. Making a bunch of these tension held foot rail stands.
Weathering the test of down trodden time.
Made for Rustica restaurant at Newcastle Beach, NSW.
I still have a sample piece in the forge.

Looking for my misplaced glasses I noticed a prowl gathering in the driveway. I got a little closer, now that’s a leap. ...
07/07/2026

Looking for my misplaced glasses I noticed a prowl gathering in the driveway.
I got a little closer, now that’s a leap. (Leopard).
Safely returned to their owner.

I made this Pea Pod probably 8 years ago and it had gone rusty in a box up on a shelf. The person I made it for happene...
19/04/2026

I made this Pea Pod probably 8 years ago and it had gone rusty in a box up on a shelf.
The person I made it for happened to be working in SA and dropped around to collect another item I had made so I gifted it to him after I had polished it to a chrome finish.

I’ve been contemplating creating a Mokume Gane Wedding Ring using both yellow and white gold to replace the original gol...
19/04/2026

I’ve been contemplating creating a
Mokume Gane Wedding Ring using both yellow and white gold to replace the original gold band that had to be cut off after a little welding accident.
Already having the gold and now stumbling upon this beaut little jewellers blow torch is one more step in the right direction.
I was a little dubious about firing up the torch as it is fed by petrol fumes from a tank within the machine and also from a seperate kettle.

Not being able to read Chinese and no English instructions as to which hose to connect to which of the 5 connection choices.
All inlets / outlets including the filler hole are open to each other with no means of arresting a flash back, but it works like a charm. From a wicked roar to an almost silent micro flame that melts solder in a few seconds.

Address

Henry Martin Square
Magill, SA
5072

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 12pm

Telephone

+61419500882

Website

Alerts

Be the first to know and let us send you an email when Artistic Blacksmith Studio posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Artistic Blacksmith Studio:

Shortcuts

Share

Category