19/05/2022
Thin floors
DEVI has designed a special system for house renovations where the construction height of the floors needs to be low. The system can be installed on the existing tiles, concrete floors and well supported wooden floors.
Mats or cables
The solution with heating mats increases the floor height with 12-15 mm only, including tiles.
The mats are self-adhesive and ensure a quick and easy installation directly on the existing floor. Since the mat itself is only 3-5 mm thick including tile glue/adhesive, the increase in the floor height will be minimal.
Optionally a thin heating cable solution will increase the floor height with 15-30 mm only, including tiles.
If the new floor surface is wooden or plastic 20-25 mm concrete is required above the heating cables.
Required Output
DEVImat™ comes in 2 sizes
The 100 W/m² mat is:
- Sufficient for comfort heating in most cases
- Maximum if the old sub floor or new top floor is wooden
The 150 W/m² mat should be chosen if one or more conditions are present:
- Cold winters with frequent temperatures below -10°C
- Poor insulation in the building
- Many obstacles like cupboards, bathtubs, lavatories, which reduces the heatable floor area
- A thin solution can be designed for any output as long as the distance between the cables is 5-10 cm.
DEVI is Europe leading brand of intelligent electrical floor heating solutions and outdoor systems for ice and snow melting, a position secured by a dedicated focus on advanced and, above all, user friendly products, developed in the world largest competence centre for floor heating.
Thin floorsDEVI has designed a special system for house renovations where the construction height of the floors needs to be low. The system can be installed ...