Aztech Cutting Solutions

Aztech Cutting Solutions Australia’s waterjet cutting specialists. 18+ years handling complex jobs across Victoria. Real machinery. Real capability.

↓ Send us your next challenge

Waterjet cutting is one of the world's most versatile and accurate cutting processes out there. Using only high pressure water mixed with a fine abrasive, we are able to cut through almost any material up to 150mm thick. As this is a cold cutting process, there is not heat effected area's or distortion of materials. We are able to minimize material wasted, as we are able to nest parts closer toget

her than conventional laser and plasma cutting processes. Not only do we cater for your one off prototyping jobs, we can also handle large production runs. We pride ourselves on maintaining the highest quality standards and having a quick turnaround time, as we are very aware that time is money. For further information please head to our website at www.aztechcuttingsolutions.com.au or alternatively drop us a line on
(03) 8339 0516.

18/06/2026

10mm porcelain. Repeated perforations. No room for guesswork.

One pattern repeated across the panel with consistency that needs to hold from start to finish.

That’s where process matters.

Waterjet allows controlled cutting across delicate and technically demanding materials, helping turn architectural concepts into fabrication-ready outcomes.

Some materials are less forgiving than others.

Send the drawings through.

If the job needs cutting, it probably needs more than a machine.It needs the right process, the right file prep, the rig...
16/06/2026

If the job needs cutting, it probably needs more than a machine.

It needs the right process, the right file prep, the right material handling and a team that can take it from brief to completion.

Waterjet, laser, plasma, oxy, routing and fabrication support, all under one roof.

Any file. Almost any material. Delivered Australia wide.

Send us your brief and we’ll work out the best way to cut it.

15/06/2026

Stone like this can go sideways fast if you rush it. Veins, density shifts, edges that want to chip.

Kept it tight all the way through.

Pink’s just a bonus.

If your spec needs to come out exactly as drawn, you know where to send it.

07/06/2026

Expensive stone.
No second chances.

20mm Zimbabwe marble through the waterjet.

No burn. No stress. No edge damage.

Just a clean result ready for install.

Call us with your next stone job.

A waterjet is only part of the story.Capability is what happens around it.Programming. Process selection. Oversized hand...
02/06/2026

A waterjet is only part of the story.

Capability is what happens around it.

Programming. Process selection. Oversized handling. 5-axis cutting. Large-volume capacity. End-to-end project support.

Built to cut properly. Built to keep projects moving.

Got a job others have hesitated on?
Send the drawings through.

CutToSpec Manufacturing

01/06/2026

400+ sheets through the machine.

No drop-off. No variation.

When volume goes up, so does the risk… unless your process is dialled.

Call us with your next batch.

29/05/2026

Glass and brass, in the same job.

Handled in-house.
Cut on the same machine.

No handoffs. No tolerance stacking. No surprises at install.

Just clean, repeatable results where it counts.

When the design gets clever, the process has to follow.

Send through your next job.

26/05/2026

One workshop.
Very different personalities.

Foam. Tile. Bisalloy. Steel.
Some delicate. Some stubborn. Some that absolutely punish the wrong cutting method.

This week’s mix is a good reminder that capability isn’t about one material or one machine. It’s knowing what process fits the job.

Got something awkward, oversized, delicate or heavy? We’ll take a look.

24/05/2026

Porcelain, but make it technical.

12mm Calacatta Oro by Infinity Surfaces, supplied via Porcelain Plus.
Processed on the waterjet for clean edges, tight tolerances, zero heat.

When the finish matters just as much as the cut.

Let’s talk capability.

Address

45a Lara Way
Melbourne, VIC
3061

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61383390516

Website

Alerts

Be the first to know and let us send you an email when Aztech Cutting Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aztech Cutting Solutions:

Shortcuts

Share

Category