What are the opening hours?

Monday 7am - 4:30pm Tuesday 7am - 4:30pm Wednesday 7am - 4:30pm Thursday 7am - 4:30pm Friday 7am - 4:30pm

Nelsons CNC

Name: Nelsons CNC
Address: Shed 4, 135 Grigor Street West, Sunshine Coast, QLD, 4551, AU
Telephone: +61424697003
Rating: 5

The Original Press Fit End Cap - made to perfectly fit the ends of Blade and Batten Aluminium fencing. No weld or silicion required. www.nelsonscnc.com.au/shop
(1)

Aluminum End Caps to fit into Aluminum Extrusions.

09/06/2026

Still welding the ends of your pool fence?

This custom pool fence has been finished with Nelsons CNC aluminium end caps, creating a clean, professional look without the time of welding each one.

Designed with a precision interference fit, our aluminium end caps simply tap into place with a rubber mallet and stay securely installed.

Manufactured on the Sunshine Coast and shipped Australia-wide. Shipping to USA also available.

08/06/2026

💦 ALUMINIUM POOL FENCING FINISHING DETAILS 🌴

When you’re building aluminium pool fencing, it’s often the small details that separate a good job from a great one.

At Nelsons CNC, we manufacture aluminium end caps designed to suit round aluminium tube commonly used in aluminium pool fences.

These aluminium end caps create a clean, finished appearance while helping prevent water, dirt and insects from entering the tube.

Unlike plastic inserts, Nelsons CNC aluminium end caps are machined from aluminium and designed with a precision interference fit, allowing them to be tapped into place with a rubber mallet. No welding, screws or glue required.

Whether you’re fabricating aluminium pool fencing, balustrades, gates or handrails, the finishing details matter.

Nelsons CNC manufactures over 600 sizes of aluminium end caps to perfectly suit round tube, SHS and RHS aluminium extrusions. Shipping Australia wide and to the USA.

How do you cap your aluminium pool fence?

07/06/2026

I was at a mate's place for a BBQ on the weekend and caught myself doing what I always do...

Looking at the fence. 😂

Walking past, I noticed all the 50x10 battens had been capped off properly. It's one of those little things that finishes a job off and makes it look complete.

The funny thing is most people would never notice. But leave the ends open and once you've seen it, you can't unsee it.

These ones were fitted with our Nelsons CNC 50x10 aluminium end caps. Nice clean finish and no open ends.

I reckon the best products are the ones nobody notices. They just make the whole job look better without drawing attention to themselves.

Anyone else in the industry find themselves checking out fences, gates and screens whenever they're at someone else's house, or is it just me? 👀

04/06/2026

The screening on this Aurora on Sunrise project create a striking architectural feature and to complete the look each batten will be finished with a matching aluminium end cap.

These custom 45° end caps were CNC machined by Nelsons CNC specifically to suit the angled cut battens, then powder coated in Kinetic Bronze to match the finished project.

Beyond the appearance, aluminium end caps help seal the open end of the extrusion, reducing the entry of water, dirt and insects while giving the installation a clean, professional finish.

Great fabrication work by Metal Trendz on this project. The attention to detail throughout the build is what makes it special.

We manufacture over 600 sizes of aluminium end caps to suit aluminium battens, fencing, gates, privacy screens and architectural projects across Australia.

03/06/2026

Question 🙋‍♂️👷
What’s your go-to when finishing aluminium battens?

JWeld Projects recently completed these custom aluminium batten gates using 40x40 battens, finished off with our precision-machined aluminium end caps.

A lot of time goes into designing and building gates like this, so it makes sense to finish it properly. The end caps help seal the open ends of the battens while giving the whole project a clean, consistent look from every angle.

Our aluminium end caps are CNC machined and designed with a true interference fit, so they install by simply tapping them into place with a rubber mallet. No welding, no screws and no glue required.

Big thanks to the team at JWeld Projects for choosing Nelsons CNC End Caps and for sharing these photos. The finished result looks fantastic.

02/06/2026

5000 End Caps. One Exact Fit.

What does 5000 precision-machined aluminium end caps look like?

This.

In this batch, we’re manufacturing 50mm x 10mm aluminium end caps for batten fencing specifically designed to suit a 1.6 wall thickness and a square edge - all produced on our CNC machining centres and supported by automated robotic loading systems for consistent quality and efficiency.

Every end cap is machined to suit a specific extrusion size, wall thickness and corner radius. That means when they arrive on site, they’re designed to achieve a true interference fit, no glue, no screws and no welding required.

At Nelsons CNC, we don’t make generic caps. We manufacture end caps to exact specifications so fabricators, fence manufacturers and installers get a professional finish that stays in place.

✔ 50mm x 10mm end caps to suit a 1.6 wall with a square edge for batten fencing
✔ Precision CNC machined aluminium
✔ Automated robotic production for large order capacity
✔ True interference-fit design
✔ Made for aluminium battens, fencing and screening systems

From one-off custom runs to production quantities of thousands, every cap is manufactured with the same focus on fit, finish and consistency.

01/06/2026

Last week we had a group of Year 12 Engineering students from Caloundra State High School in our workshop.

They spent the morning looking through our CNC machining centres, robotic loading systems and seeing how our aluminium end caps are manufactured at Nelsons CNC.

It was great to see the students genuinely interested and asking plenty of questions - it doesn't feel that long ago I was in their shoes, although the kids would probably disagree 😆

Back then I only dreamt of running a manufacturing business and what excites me now is seeing how quickly technology is changing in our industry. Between automation, robotics and ai, manufacturing looks very different to what it did when I left school, and it’ll probably look different by the time these guys graduate!

Thanks again to the students and the staff at Cal High for giving us the opportunity to share a small part of what we do every day.

29/05/2026

A nice finish on a friday arv 👌 A white batten fence never fails to disappoint 😆 These fence caps are an exact match for this RHS aluminium fence and won’t pop out or fade in the sun ☀️ These end caps are made from premium 6060 T5 aluminium, supplied in mill finish and are ready for you to powder coat in your choice of colour or even add that fancy timber sublimation everyone’s loving at the moment. Let us know if you need help with sizing! Perfect for finishing off your batten fencing.

Nelsons CNC End Caps 🇦🇺 Fast shipping nation wide and shipping available in the USA 🇺🇸

28/05/2026

The best fit possible! Fence caps that perfectly fit 50x10 slats. A bulk order ready to go out once they are dried and polished.

25/05/2026

Cover it with the right size ☑️ Why aluminium hole plugs? Because they kick over plastic hole plugs! 👊 These bad boys are made from premium aluminium (6060 T5) and yes that means you can powder coat them whatever colour your heart desires! 🔵⚫️⚪️ They also tap into place without glue or welding! Game changers!

Bulk orders available. No minimum order. Nelsons CNC Hole Plugs.

Address

Shed 4, 135 Grigor Street West
Sunshine Coast, QLD
4551

Opening Hours

Monday	7am - 4:30pm
Tuesday	7am - 4:30pm
Wednesday	7am - 4:30pm
Thursday	7am - 4:30pm
Friday	7am - 4:30pm

Telephone

+61424697003

Website

http://www.nelsonscnc.com.au/

Alerts

Be the first to know and let us send you an email when Nelsons CNC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nelsons CNC:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Engineering Company in Sunshine Coast?