Jkc performance & fabrication

Jkc performance & fabrication Automotive fabrication

Jeffery Guy turbo ls ve ss back for some more upgrades! We fitted a Direct Clutch Services twin plate clutch. Front set ...
25/08/2026

Jeffery Guy turbo ls ve ss back for some more upgrades!
We fitted a Direct Clutch Services twin plate clutch.
Front set of brembo brakes and Disc Brakes Australia rotors.
A set of btr rocker covers and re made catch can lines in braid.
Relocated the drivers side coils.
Fabbed up a set of rear mufflers and 3.5” stainless tips 💪🏻

Toms wrx we had in last week! We fabricated a up pipe to suit the high mount turbo. We then fabricated a 3.5” stainless ...
25/08/2026

Toms wrx we had in last week!
We fabricated a up pipe to suit the high mount turbo.
We then fabricated a 3.5” stainless dump pipe into a 3” exhaust system using the customers supplied mufflers.
We mounted and plumbed the external gate,

1hz 100 series LandCruiser in for a complete turbo conversion.We started with a custom steam pipe high mount manifold, w...
04/08/2026

1hz 100 series LandCruiser in for a complete turbo conversion.
We started with a custom steam pipe high mount manifold, we used a James 4849 turbo, off that we built a 3” turbo back stainless system with resonator to keep noise down, we also fabricated a full front mount intercooler set up with 2.5” turbo to cooler, 3” cooler to intake, we also plumbed oil lines. We finished off with a set of gauges for egt, boost, oil pressure and water temp

s had his jzx110 in for a 3” stainless system single muffler and finished with 4” out the back 🤘🏻
04/08/2026

s had his jzx110 in for a 3” stainless system single muffler and finished with 4” out the back 🤘🏻

Had one of our good mates Ben n80 hilux in for a couple modifications 🫡First up we did a full foot mount Intercooler set...
17/07/2026

Had one of our good mates Ben n80 hilux in for a couple modifications 🫡
First up we did a full foot mount Intercooler set up with 2.5” turbo to cooler and 3” cooler to intake manifold using a Plazmaman street series intercooler. How good do blqck gose clamps look but!
We also fabricated a 3” stainless steel turbo back exhaust system.

Another rig in from Indie Grayson 🤘🏻Barra swapped Belair in for the works. Stainless 4” dump into 3.5” system with reson...
13/07/2026

Another rig in from Indie Grayson 🤘🏻
Barra swapped Belair in for the works.
Stainless 4” dump into 3.5” system with resonator finished with droop tip out of the rear muffler.
We fabbed up some 3” and 2.5 cooler pipes and 2” external gate pipe while it was in 💪🏻

Had Ryley Wineti built fg in for a couple touch ups 💪🏻We modified the dump pipe, moved the o2 sensor to a spot before va...
13/07/2026

Had Ryley Wineti built fg in for a couple touch ups 💪🏻
We modified the dump pipe, moved the o2 sensor to a spot before valve so it reads correctly while valves open.
Modified the valve location and added a side pipe on a v band while still allowing use with out side pipe.
We also ditched the rubbish oval mid section and fabbed up a tucked 4” stainless mid section to the existing over axle section.

Zac Sexton gangsta 2jz swapped s14 in for a bunch of clean up jobs 🫶🏻We fitted his new big boy cooler and then fabricate...
03/07/2026

Zac Sexton gangsta 2jz swapped s14 in for a bunch of clean up jobs 🫶🏻
We fitted his new big boy cooler and then fabricated some new cooler pipes, 2.5”turbo to cooler & 3” cooler to intake in stainless !
We re mounted the radiator, re mounted the fan on radiator while it was out.
We patched up a previous hacked up holes in the engine bay.
Made new braided lines for turbo and lower rad hose.
Fitted new high amp alternator and drive belt.

Josh Lawrence had his is200 in for a bunch of work💪🏻Haltech rebel jz.R35 coil pack kit. Power tune dash. Front mount int...
12/06/2026

Josh Lawrence had his is200 in for a bunch of work💪🏻
Haltech rebel jz.
R35 coil pack kit.
Power tune dash.
Front mount intercooler kit, 2.5” and 3” stainless cooler piping.
4” Intake pipe.
3” turbo back exhaust
Modify manifold, gate and 2” screamer pipe.
Full fuel system, surge in boot, new fuel lines, fpr8, fuel rail with 2200cc injectors.

Jayemm in for a stainless 2.5” cat back finished with 4” style cannon muffler 🤘🏻
12/06/2026

Jayemm in for a stainless 2.5” cat back finished with 4” style cannon muffler 🤘🏻

Address

U2 5-7 Gaffield Street
Morayfield, QLD
4506

Telephone

+61480729653

Website

Alerts

Be the first to know and let us send you an email when Jkc performance & fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Jkc performance & fabrication:

Shortcuts

Share

Category