Kitson Manufacturing Solutions

Call Directions Website Contact the business

Kitson Manufacturing Solutions KMS are a leading provider of integrated manufacturing, building & construction services. KMS is certified in 3834 struchual code

We are a Fixed Plant Maintenance Company that provides a high quality fabrication and fitting service for the mining and local agicaulture industry, but not limited too.

14/10/2026

Turns out word puzzles hit different on a worksite.

These blokes can weld to the millimetre but "July" nearly broke them.

11/10/2026

Getting good feedback from a client after a job like this one means a lot.

North Parkes had two tipping cradles that had corroded to the point of being unsafe. They needed them replaced, and KMS handled the full fabrication in-house. These things are roughly the size of a Land Cruiser, so it's not a small job. Two weeks, two stages, full QA/QC, non-destructive testing, blast and paint, the whole scope done under one roof.

What made this one stand out was what happened after delivery. The client 3D scanned both cradles to check the as-builts against the original design, measuring tolerances, heights, and overall dimensions. The feedback they sent back was that the accuracy was spot on.

That's what 10 years of fabrication experience looks like in practice. Not just building something that looks right, but building something that measures right.

If you've got ageing or unsafe plant equipment that needs replacing, send us a message and we can talk through what's involved.

We're hiring 🔥Kitson Manufacturing Solutions is after a Laser Cutter Operator to run our HSG 6kW fibre laser here in Par...
25/09/2026

We're hiring 🔥

Kitson Manufacturing Solutions is after a Laser Cutter Operator to run our HSG 6kW fibre laser here in Parkes.

If you know your way around a fibre laser, can read a drawing, and take pride in a clean, accurate cut, we want to hear from you. You'll join a solid workshop team building gear for the mining and infrastructure sectors, with modern equipment and long-term work on offer.

HSG experience is a bonus, but not a must.

đź“© Send your resume to [email protected]

13/05/2026

Major components are in, steelwork is moving, and the building still goes up another two storeys from here.

Good to hear MSM Milling are happy with how it's tracking, and we're looking forward to seeing it through with them.

12/05/2026

When Bob and the team at MSM Milling say the crew is passionate and proud to be involved, that's the kind of feedback that means more than any number on a page.

Good people, good project, good outcome.

06/05/2026

Everyone sees the finished job rolling out the door.

Nobody sees the hours of setup, positioning, and prep that happened before a single weld was laid.

03/05/2026

By the time the guys arrive on site, the work is already planned, parts are sorted, and the paperwork is printed.

The job during the day is just keeping it moving and making sure nothing gets in the way.

29/04/2026

Prep is everything. Clean metal, right settings, steady hand, and maybe go easy the night before.

Jimmy's been doing this long enough to know exactly what separates a good weld from one that gets ground back out.

26/04/2026

Working above a live conveyor belt with no room for error.

That's exactly the situation on this apron feeder refurbishment. The feeder had been running for over 20 years and was completely worn out. Top head chutes, skirts, structure, the old chain conveyor, all the drive components. Everything had to come off and be replaced.

The catch was that the conveyor belt underneath couldn't be shut down. So every component we removed had to be carefully rigged and lifted clear without dropping anything onto the running belt below. One mistake and the whole plant stops.

We worked through it methodically, got everything installed and QA'd, and had the feeder back in service within two weeks.

It's the kind of job that looks straightforward on paper but requires a lot of planning and care to pull off properly on site.

22/04/2026

The bit no one sees: drawings land in the workshop with details missing, and someone has to track down the answers before a single cut gets made. That back and forth is just part of the job.

Address

16/18 Renshaw Street
Parkes, NSW
2870

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61268623655

Website

Alerts

Be the first to know and let us send you an email when Kitson Manufacturing Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kitson Manufacturing Solutions:

Shortcuts

Share

Category