Transbeam Industries

06/09/2026

Happy Father's day 💙💙💙

01/09/2026

Rolling - Where Accuracy and Consistency Matter Most

Our HACO CNC 4‑pinch roller delivers controlled pre‑bends, tight diameters, and repeatable accuracy across every run.
Clamping between the centre rolls eliminates slip, reduces flat ends, and gives you cleaner, more predictable results - exactly what you want when the job can’t afford rework.

Whether it’s mild steel or wear plate, simple cylinders or more demanding diameters, we roll with precision that makes downstream fabrication faster and cleaner.

We also partner with great trusted companies to complete tasks outside our inhouse capabilities. ensuring you get the outcome you need without compromise.

Got a challenging rolling job? Send your RFQ and we’ll get it moving
📞 (08) 9454 7177
📩 [email protected]

26/08/2026

🚨 WE’RE HIRING! 🚨

Are you an experienced CNC Plasma Programmer looking for an exciting new challenge?

🔧 Transbeam is looking for a skilled CNC Plasma Programmer to join our team!

If you have the experience, skills and drive to take on a new opportunity, we’d love to hear from you.

👉 Click the link below and apply now!

📍 Join the team at Transbeam and take the next step in your career.

CNC Programmer

06/08/2026

Precision Bending That Improves Assembly and Reduces Rework

Accurate bending is one of the most critical steps in fabrication. When the bend is right, everything downstream gets easier - fit‑ups, welding, assembly, and final quality.

That’s why Transbeam’s CNC press brake capability is built around accuracy, repeatability, and control.

Designed for performance and reliability, our Bystronic Xpert Pro 320 brings advanced capability and efficiency to every job:
PRESS: 320‑ton press brake
BENDING LENGTH: 4300 mm
WIDTH BETWEEN POSTS: 3700 mm
MAX LOAD: 180 t/m

Material Capacities:
• Mild Steel: up to 16 mm (1600 mm wide)
• Wear Plate: Hardox® 400–450, BIS 450 — up to 8 mm (3000 mm wide)
• Q&T Structural: Strenx® 700, BIS 80 — up to 12 mm (2000 mm wide)
STANDARD STROKE: 450 mm
OPEN HEIGHT: 840 mm

ADVANTAGES:
• Laser angle measurement with automatic adjustment
• Hydraulic sheet support / follower table for safer, more accurate handling

Why Precision Bending Matters
• Controlled spring‑back
• Consistent angles
• Better fit‑ups
• Reduced grinding and correction

Wherever pressed components are used and precision counts - this capability delivers real value.

Accurate bends mean faster assembly, fewer workshop hours, and less rework. Better fit‑ups. Cleaner welds. More efficient fabrication.

We also partner with great trusted companies to complete tasks outside our inhouse capabilities, ensuring you get the outcome you need without compromise.

Got bending work coming up?
Send your drawings or RFQ and we’ll get it moving

23/07/2026

Proper Prep. Quality Finish.

Surface prep is everything. Our blasting and painting workflow delivers consistent profile, clean substrate, and high‑standard coatings built to last in real‑world conditions.

We can achieve automotive‑level finishes at an industrial scale. Every Bruce Rock Engineering trailer runs through our high‑performance paint booths, and we apply that same standard to customer components.

• Industrial abrasive blasting
• Controlled surface profiles
• High‑build protective coatings
• Durable, uniform finishes
• Processes built to minimise rework and maximise longevity

Got components needing blasting or paint? Send your RFQ and we’ll get them sorted.
📞 (08) 9454 7177
📩 [email protected]

03/07/2026

Kinetic Plasma Plate Processing, One setup. Multiple processes. Fabrication-ready plate.

At Transbeam Industries, our Kinetic™ K5200 CNC plate processor is built around one goal: making fabrication easier, faster, and more predictable for our customers.

This isn’t just plate cutting. It’s full plate processing - combining cutting, drilling, tapping, milling, bevelling, and integrated CNC stud welding in a single setup.

What this means for you is simple: plate components arrive ready to fabricate, not ready for extra work.

Why it changes fabrication
• Less handling - fewer lifts, less movement, reduced damage and safety risk
• Less labour - no secondary drilling, tapping, countersinking, milling, or stud welding
• More accuracy - all features processed in one setup for consistent positional accuracy
• Fewer setups - reduced rework, no manual marking out, no chasing tolerances
• Faster assembly - improved fit-up, quicker welding, shorter overall build times
Your workshop focuses on fabrication, not preparation.

Industries that benefit:
Mining & resources
Oil & Gas
Structural fabrication & construction
Road transport equipment manufacturing
OEM & heavy equipment manufacturing
Transport & infrastructure
Agriculture & specialised machinery

Because we combine one of Australia’s most capable CNC plate processing machines with deep fabrication knowledge, a large plate inventory, and a team that understands downstream fabrication pressures, we don’t just process plate - we deliver fabrication outcomes.

When you reduce handling, secondary operations, and rework, you reduce cost, risk, and lead time - helping you improve throughput, protect margins, and hit project deadlines with confidence.

Looking to streamline your plate work?
Send through your RFQs or drawings and let’s talk about how full plate processing can support your next project
📞 Call us on (08) 9454 7177
📩 Email [email protected] See less

05/06/2026

After more than 12 years of dedication, we’re saying a heartfelt congratulations and farewell to Alan as he heads into retirement 🌇

Alan joined Transbeam back when the team was just seven people in Bibra Lake, starting out as a Plasma Operator. Since then, he’s grown alongside the business, stepping into his role as CNC Plasma Programmer, with Transbeam becoming part of BRE as the business expanded across locations and continued to evolve.

Over the years, Alan’s commitment, consistency, and steady expertise have made a lasting impact on the Transbeam team. His work has quite literally helped shape where we are today, and he’s been a familiar and valued part of the business for many years.

From all of us at Transbeam, thank you Alan for your loyalty, skill, and contribution over the past 12 years. Wishing you a retirement filled with good health, relaxation, and plenty of time to enjoy the things you’ve not had a chance to get round to!

Enjoy the next chapter - you’ve absolutely earned it! 🎉

02/06/2026

The Transbeam Team are doing 3,307 push-ups in 24 days as part of The Push-Up Challenge to raise awareness and funds for mental health in Australia. This target represents the 3,307 people who died by su***de in Australia in 2024 (the most recent stats). You can push for better mental health too by donating to my fundraising page and supporting this important cause: www.thepushupchallenge.com.au/fundraisers/andreasaza/the-push-up-challenge Funds raised will go to Lifeline to support much-needed mental health services and initiatives in Australia.
Any donation, big or small, is really appreciated!

29/05/2026

Just a reminder that we will be closed this coming Monday for the WA Day public holiday as we celebrate this great state we call home 💙

Back to business Tuesday!

20/05/2026

Robotic Welding - Perfect Repeatability. Every Time.

Robotic welding delivers the kind of accuracy, consistency, and cycle‑to‑cycle repeatability that manual welding simply can’t match.

It’s built for batch work, repetitive components, and production runs where quality and uniformity matter.

Free up your skilled welders for the complex jobs and let the robot handle the repetition with speed and precision!

Got repetitive welding work? Send your RFQ and drawings through
📩 Email [email protected]