Nelg's Ali Mods

Nelg's Ali Mods Specialising in high quality Custom Fabrication & Welding for Cars

07/06/2026

Just a quick update to let everyone know Nelg Taylor is in hospital with appendicitis and booked in for surgery tomorrow, so please bear with us as we have a few slow weeks ahead!

Will do our best to respond to any enquiries, but please note shop hours will be limited over the next couple of weeks.

Thanks for the understanding 😊

Here’s a set of 100L Torona drop tanks, one with an in-tank pump unit for a customer and the other for external pump use...
02/06/2026

Here’s a set of 100L Torona drop tanks, one with an in-tank pump unit for a customer and the other for external pump use.

These are a very large Torana drop tank look which fill up the back of the Torana for anyone chasing the original style (last pic as an example)

They can be supplied with or without filler necks.

We currently have one external tank for sale and can be supplied with straps & rubbers to suit original mount points, and filler neck if required.

Includes:
-10 pickup
-8 breather
-8 return
1/2” barb to suit original filler necks
73-10 ohms sender to suit factory gauge cluster

Note: These are a drop tank and do not suit licensing & pit requirements due to departure angle.

Please send us a message for pricing 🙂

Welding dice kits now available 🎲100mm x 100mm CNC router cut out of 3mm aluminium, prepped and ready for welding.Perfec...
29/05/2026

Welding dice kits now available 🎲

100mm x 100mm CNC router cut out of 3mm aluminium, prepped and ready for welding.

Perfect for heat control practice!

$40 per kit 🙂

Here’s a set of VB - VS 80L tanks we have just built.One houses an Aeromotive in-tank pump hanger unit we have just made...
12/05/2026

Here’s a set of VB - VS 80L tanks we have just built.

One houses an Aeromotive in-tank pump hanger unit we have just made for a customers VL.

The other is for an external fuel pump with a -10 pickup, 8 breather & return, and a custom fuel sender with 282-40 ohms to suit factory dash requirements.

It also comes with stainless steel straps & rubbers to fit factory mount points.

We have one available in stock for purchase without our usual 6-8 week lead time for $2230 - SOLD

For anyone who likes to DIY on their own vehicle’s, we stock a variety of fabrication items that we use in-house oursel...
11/05/2026

For anyone who likes to DIY on their own vehicle’s, we stock a variety of fabrication items that we use in-house ourselves.

▪️304SS Tube & 90 degree bends in 1.5”, 1.75”, 2”, 2.5”, 3”, 3.5” & 4”
▪️ 304SS Expanders/reducers
▪️ 304SS Exhaust flanges & gaskets
▪️Speed Flow weld-on’s in aluminium, stainless & mild steel
▪️Aluminium tube & donuts in 1.5”, 2”, 2.5”, 3”, 3.5” & 4”
▪️Aluminium & stainless steel welding coupons
▪️Exhaust Mounts
▪️Blower Parts
▪️Various sizes of chromoly tube

If you are chasing anything please don’t hesitate to reach out, but please keep all enquiries strictly to the page only, or feel free to send us an email at [email protected] 😊

We had Brad’s twin turbo small block EK in for some upgrades as he wasn’t confident in the original cage.Between fab, pa...
04/05/2026

We had Brad’s twin turbo small block EK in for some upgrades as he wasn’t confident in the original cage.

Between fab, paint, electrical & tune, the timeframe is pretty tight as it’s heading over to Street Machine Drag Challenge in October.

Work Carried Out:

▪️ Removal of original cage
▪️ New 6 Point cage with additional v-bars in the roof & extra bar work to tie into the floor in order to give the car extra strength
▪️ Tube work to tie in the front end as the front clip unbolts & we were worried about it twisting to the body
▪️ New set of matching Kirkey seats

+ many other small background jobs as usual!

The car will be back after paint for a new Plazmaman water to air intercooler as the original one leaked like a sieve, along with fresh pipework to match.

New items to the shop… Blower manifold cover plates, blower inlet cover & snout cover to seal up blowers during maintena...
16/04/2026

New items to the shop… Blower manifold cover plates, blower inlet cover & snout cover to seal up blowers during maintenance & storage, to avoid any nasty surprise ending up inside!

Mark’s big block Camaro came in to make his new rims & tyre combination fit. They were a monster 29 x 18 x 15” tyre!The ...
19/03/2026

Mark’s big block Camaro came in to make his new rims & tyre combination fit. They were a monster 29 x 18 x 15” tyre!

The car already had a 4-link, coilovers and 9” completed by another shop, long before Mark owned it, which didn’t require moving as it fitted with the new chassis rails.

We also built the car to sit about 2.5” lower than it sits in the final picture, but had to be raised up to suit 18” rims for skids.

Work completed
▪️New rear chassis rails
▪️Move the coilovers inwards
▪️Brace the entire rear end & bead rolled tin work
▪️Jack point
▪️3mm tubs
▪️Bash plates
▪️Twin 4” exhaust with 5” tips
▪️100L Fuel Cell
▪️New dry sump tank to match original tanks in car
▪️Breather tank
▪️Plumb all new work in Speedflow lines & fittings, ready to head off to Chevpower to be fired up

As always there were many other small jobs along the way to tie everything together.

In between the large builds there are always plenty of tanks heading out in all shapes and sizes 😀
03/03/2026

In between the large builds there are always plenty of tanks heading out in all shapes and sizes 😀

What a year it has been so far! We have been so busy, hence the lack of posts on here. Here is one of the builds that ha...
09/09/2025

What a year it has been so far! We have been so busy, hence the lack of posts on here.

Here is one of the builds that has just left with a few before & after pics.

Originally came in for front tanks & exhaust, and left as a complete running car.

Here is a scaled down list of jobs carried out..
▪️ Flat firewall & smoothed engine bay
▪️ Hidden water, breather & overflow tanks in the front guards, as well as power steering and remote oil filter all in the front bumper
▪️ 100L fuel tank
▪️ Twin 3.5” stainless steel exhaust
▪️ Tube x-member
▪️ Convert blower manifold to EFI, v-plate, burst panel & weld top plate on
▪️ Fit-up of complete car
▪️ Plumb entire car in Speedflow hose & fittings
+ many other jobs to finish the car off

The owner was very specific that he didn’t want the tanks & fuel lines in the engine bay, as he wanted it as bare as possible.

The car was sent to Shiftkits Australia for complete wiring harness & half the Haltech catalogue 😂

It left for its journey back to Karratha last week, with a very happy owner!

Address

Unit 12, 8 Pickard Avenue Rockingham
Perth, WA
6168

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Telephone

+61403514425

Website

Alerts

Be the first to know and let us send you an email when Nelg's Ali Mods posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nelg's Ali Mods:

Shortcuts

Featured

  • BYD B

    BYD B

    22 Olga Road, Maddington

Share

Category