Advanced Performance Machining

Directions Website Contact the business

Advanced Performance Machining APM has moved to a much better and more efficient way of working. As of February 2024, Aaron will only be contactable via email or FB messages.

He will aim to get back to you as soon as he can. We look forward to your message!

How good does the Superflow look in the new dyno room? 😵‍💫It's been too long since the walls have thundered with the sou...
09/10/2026

How good does the Superflow look in the new dyno room? 😵‍💫

It's been too long since the walls have thundered with the sound of an engine singing at APM... that changes this weekend 😈

Who's ready for some new dyno room content?!

Are you or someone you know looking for work as an engine machinist in Sydney?We are currently on the hunt for an experi...
02/10/2026

Are you or someone you know looking for work as an engine machinist in Sydney?

We are currently on the hunt for an experienced machinist to take on our cylinder head section.

No experience in engine maching? No problem! If you have general machining experience and are looking to build a variety of some of the coolest engines in Australia, then we want you.

DM us or send your resume to [email protected] for an immediate start!

Cheers,
Aaron

The end of an era 😵‍💫 After 13 years, 950+ engines on the dyno and thousands of happy and loyal customers, Unit 2, 6 Sam...
07/09/2026

The end of an era 😵‍💫 After 13 years, 950+ engines on the dyno and thousands of happy and loyal customers, Unit 2, 6 Samantha Place is cleared out!

As we continue to work our way through the inundated backlog of projects, we thank EVERYONE for their patience, support and understanding while the APM crew finds their groove.

Onwards and upwards. Thank you for being a part of this chapter.

🔥 **HONDA B18 ENGINE PACKAGE FOR SALE** 🔥Honda B18 engine package with quality performance parts. All components are in ...
01/09/2026

🔥 **HONDA B18 ENGINE PACKAGE FOR SALE** 🔥

Honda B18 engine package with quality performance parts. All components are in **excellent condition** and the engine is **ready for assembly**.

🔧 **B18 Honda C7 Engine Block**
• Freshly honed
• Decked
• Line honed

🔧 **Honda B18 Crankshaft**
• Linished
• Checked
• Balanced

**Included:**
• Used Manley H-Beam Conrods
• Used High Compression Wiseco Pistons
• NEW ACL Race Bearings
• NEW Total Seal Piston Rings
• ARP Main Stud Kit

🔥 **B18 Cylinder Head**
• Just serviced
• Ferrea Valves
• TODA C2 Cams
• Performance Valve Springs

**Also included:**
• Used Steel Flywheel & Clutch
• Used Fluidampr Harmonic Balancer
• Used ARP Balancer Bolt

✅ All parts in excellent condition
✅ Quality performance components
✅ Machine work completed
✅ Ready for assembly

💰 $7,700

Message for further details.

26/08/2026

This came to us as a 308 Holden with early heads, built many a moon ago. It was brought to us with some leaks, cracked ring lands on some pistons and was desperate for a new lease on life 🫡

We revitalised it with a 355 S**t stroker crank, SRP pistons, gave the heads a freshen-up and some new Isky springs, and topped it off with a new Crow Cams hydraulic flat-tappet camshaft. All of this before plugging it into our dyno and running a respectable 410hp and 425ft/lb of torque 👏

S**T Crankshafts Crow Cams Australia Pty Ltd JE Pistons

Happy Birthday A-aron! 🎉Another year, another post about the best boss ever!You are one of the hardest-working people I ...
10/08/2026

Happy Birthday A-aron! 🎉

Another year, another post about the best boss ever!

You are one of the hardest-working people I know, and it has been amazing to watch how much you have grown the business over the past year. Your dedication, drive, and passion for what you do never go unnoticed.

Thank you for everything you do for the team and for always leading by example. Wishing you the best birthday and another successful year ahead!

Happy Birthday! 🥳

07/08/2026

A 565ci Big-Block Chev built to get a restored 90's raceboat from A to B 😉

Running on pump fuel, this hefty unit made 810hp at 6200rpm, and a chassis (hull) twisting 800ft-lb at 4500rpm!

🚤 Weiand Tunnel Ram
🚤 2 x Holley XP Ultra Carbs
🚤 S**t Crank and Rods
🚤 Dart Block
🚤 AFR 345 Cylinder Heads
🚤 Crane Solid Roller Camshaft
🚤 Moroso 4-Stage Dry Sump Pump

The boat should get a bit of a wriggle on now, right?

On the dyno yesterday was this 565ci Big Block Chev beast! 🔥 Brought in by the customer for a rebuild and dyno, ready to...
28/07/2026

On the dyno yesterday was this 565ci Big Block Chev beast! 🔥 Brought in by the customer for a rebuild and dyno, ready to be back on the water in a month 💪

Dyno run coming with some pretty decent torque numbers coming out of this one...

27/07/2026

While we continue waiting patiently for our new dyno cell, this 6L LS popped up in the memories. We machined the bottom end, but this engine was built by the owner for burnout duties! 🫡

🫡 Stock Crank and Rods
🫡 Wiseco Forged Pistons
🫡 Crow Cams Camshaft
🫡 Ported Cathedral Port Heads
🫡 E85 Carb
🫡 574 horsepower

What's your favourite engine platform to run NA?

24/07/2026

It's not every day you get to build a blown small block Chev for an immaculate HK Monaro. Thought we'd spend Friday arvo reminiscing about building this 'simple cruiser' for Justin Walshe Motorsports.

Address

Unit 18, 42 Turner Road
Smeaton Grange, NSW
2567

Opening Hours

Tuesday 7am - 4:30pm
Wednesday 7am - 4:30pm
Thursday 7am - 4:30pm
Friday 7am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when Advanced Performance Machining posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Advanced Performance Machining:

Shortcuts

Share

Category