DMG Solar & Electrical

Call Directions Website Contact the business

DMG Solar & Electrical Reliable solar and battery systems from WA energy experts. Local, straightforward, and built to last.

Recently installed in Willetton: 9.975kW of solar and 37.2kWh of AlphaESS battery storage.Classic Willetton: a deep red ...
11/10/2026

Recently installed in Willetton: 9.975kW of solar and 37.2kWh of AlphaESS battery storage.

Classic Willetton: a deep red terracotta roof, mature trees all around and plenty of hips to work with. The panels went on in several groups, a long double run on one face, a shorter set beside the whirlybird and more stepping up toward the ridge, all square to the tiles.

The battery is big enough to need two cabinets. The AlphaESS SMILE-G3 runs a 5kW inverter with 37.2kWh of storage split between a taller cabinet and a shorter one alongside it, standing side by side against the brick under cover with a bollard in front of each. That's enough storage to bank most of a sunny day and run on it well into the night.

System Specifications
Inverter: 5kW AlphaESS SMILE-G3
Solar Capacity: 9.975kW in several groups across the terracotta roof
Battery Storage: 37.2kWh AlphaESS, split across two cabinets
Location: Willetton, WA 6155

Alpha ESS

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

We just installed 9.975kW of solar and 41.93kWh of FoxESS battery storage in Helena Valley.That's more than four times a...
10/10/2026

We just installed 9.975kW of solar and 41.93kWh of FoxESS battery storage in Helena Valley.

That's more than four times as much battery as panels, and it's deliberate. This household wants to keep as much of the day's solar as possible and rely on the grid as little as possible once the sun goes down.

The view from this roof is hard to beat. The hills rise over a green valley of gums and rooftops, and the panels sit in groups across the brown tiles, including a long run along one of the hips. In the garage, the 10kW FoxESS H3 Smart inverter is on the wall with the cabling run neatly down to a tall battery stack below, with a steel bollard out front.

System Specifications
Inverter: 10kW FoxESS H3 Smart, wall-mounted
Solar Capacity: 9.975kW across the brown tile roof
Battery Storage: 41.93kWh FoxESS, floor-standing stack in the garage
Location: Helena Valley, WA 6056

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

Recently installed in Winthrop: 9.975kW of solar and an 18.08kWh Sigenergy battery.Some roofs come with a view, and this...
10/10/2026

Recently installed in Winthrop: 9.975kW of solar and an 18.08kWh Sigenergy battery.

Some roofs come with a view, and this is one of them. The house backs onto bushland, so from up on the tiles it's gum trees and open ground in one direction and the rest of the suburb rolling away in the other. Not a bad office for the day.

The roof is a hipped design in charcoal concrete tile, so the panels were split into neat blocks across several faces rather than squeezed onto one. Down below, the SigenStor sits against the cream brick beside a side door, under cover and out of the weather, with a steel bollard at the corner. Two battery modules sit under the 5kW controller, and the stack can grow later if needed.

System Specifications
Inverter: 5kW Sigenergy SigenStor EC Series
Solar Capacity: 9.975kW across several faces of a hipped tile roof
Battery Storage: 18.08kWh SigenStor, two modules under cover
Location: Winthrop, WA 6150

Sigenergy

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

We just installed 9.975kW of solar and a 33.28kWh GoodWe battery in Madeley.From the roof of this one, you can see the b...
09/10/2026

We just installed 9.975kW of solar and a 33.28kWh GoodWe battery in Madeley.

From the roof of this one, you can see the bushland sitting just beyond the back fences. The house is a clean, modern build with a pale Colorbond roof, and the panels went on in two groups near the skylight, set out to make the most of the main faces.

Down at ground level, the GoodWe ESA is a tall one: four battery modules stacked under a 10kW inverter, mounted on the outside brick wall at the side of the house, right beside a strip of lawn. It's IP66 rated, so outdoors is no problem. The isolators sit above it, and a steel bollard stands at the front corner.

With more than three kilowatt-hours of storage for every kilowatt of panels, this system is built for the evenings.

System Specifications
Inverter: 10kW GoodWe ESA Series hybrid, IP66 rated
Solar Capacity: 9.975kW in two groups on the Colorbond roof
Battery Storage: 33.28kWh GoodWe ESA, four stacked modules on an outside wall
Location: Madeley, WA 6065

GoodWe Australia and New Zealand

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

Recently installed in Butler: 15.2kW of solar and a 27.12kWh Sigenergy battery.This one's a big array. The main roof fac...
09/10/2026

Recently installed in Butler: 15.2kW of solar and a 27.12kWh Sigenergy battery.

This one's a big array. The main roof face is long and uninterrupted, so the panels went on in neat rows running the length of the charcoal tiles, with the hooks tucked under the tiles to keep everything watertight. On a clear day it'll produce far more than the house needs through the middle of the day, and that's the idea.

All that surplus has somewhere to go. The SigenStor sits in a rendered alcove with three battery modules under a 10kW controller, the isolator mounted high on the wall and the status ring glowing away by the time the team packed up. It's a setup that can run the house through the day and still bank a big reserve for the evening.

System Specifications
Inverter: 10kW Sigenergy SigenStor EC Series
Solar Capacity: 15.2kW in rows across the charcoal tile roof
Battery Storage: 27.12kWh SigenStor, three stacked modules
Location: Butler, WA 6036

Sigenergy

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

Recently installed in Jindalee: 11.4kW of Trina solar and a 33.28kWh GoodWe battery.From up on this roof you can see the...
08/10/2026

Recently installed in Jindalee: 11.4kW of Trina solar and a 33.28kWh GoodWe battery.

From up on this roof you can see the estate still filling in: sandy blocks waiting their turn, rows of new Colorbond and a big coastal sky. The 24 panels sit in a long double run down one face, with a second group on the upper section beside the whirlybird.

The home is three phase, so the battery side is the three phase version of the GoodWe ESA, here in its 15kW size. Four battery modules are stacked underneath it in the garage, standing between a pair of steel bollards. It's a tall unit, but the footprint is no bigger than a small cupboard, and the 15kW rating leaves plenty of room to add panels later.

System Specifications
Inverter: 15kW GoodWe ESA Series three phase hybrid
Solar Capacity: 11.4kW, 24 x Trina Solar Vertex S+ 475W panels
Battery Storage: 33.28kWh GoodWe ESA, four modules in the garage
Location: Jindalee, WA 6036

GoodWe Australia and New Zealand Trinasolar

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

We just installed 17.1kW of solar and a 15kW Sigenergy system in Cottesloe.Thirty-six Trina panels fill one long metal r...
08/10/2026

We just installed 17.1kW of solar and a 15kW Sigenergy system in Cottesloe.

Thirty-six Trina panels fill one long metal roof face in tight, even rows, with the canopy of the neighbouring trees rising right up behind them. With trees that size nearby, placement mattered, so the array went on the face with the clearest run of sun and was kept as one clean block rather than a patchwork ☀️

Down in the garage, the SigenStor holds four battery modules under a 15kW three phase controller, sharing the space with the leaf blower and the bike. There's a steel bollard on each side and the isolator on the wall above.

An array this size produces far more than most homes use in the middle of the day. With 36kWh of storage behind it, that surplus fills the battery, and the battery runs the house through the evening and overnight.

System Specifications
Inverter: 15kW Sigenergy SigenStor three phase controller
Solar Capacity: 17.1kW, 36 x Trinasolar Vertex S+ 475W panels
Battery Storage: 36.16kWh SigenStor, four modules in the garage
Location: Cottesloe, WA 6011

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

New install in Thornlie: 7.6kW of Trina solar and an 18.08kWh Sigenergy battery.The SigenStor went in under the patio ag...
07/10/2026

New install in Thornlie: 7.6kW of Trina solar and an 18.08kWh Sigenergy battery.

The SigenStor went in under the patio against the face brick, a sheltered spot that keeps it out of the direct sun through the hottest part of the day. It stands on the concrete with a steel bollard on each side and the isolator on the wall beside it. Two battery modules sit under the 5kW controller, and there's room to add more to the same stack later.

Up on the terracotta tiles, 16 panels went on in rows across the main roof faces, positioned well clear of the palms nearby. On a clear day that's enough to run the house and fill the battery for the evening without much going to waste.

System Specifications
Inverter: 5kW Sigenergy SigenStor EC single phase
Solar Capacity: 7.6kW, 16 x Trina Solar Vertex S+ 475W panels
Battery Storage: 18.08kWh SigenStor, two modules under the patio
Location: Thornlie, WA 6108

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.



Recently installed in Ellenbrook: 6.65kW of solar with a 13.92kWh FoxESS battery.Starting on the roof, 14 Trina panels a...
07/10/2026

Recently installed in Ellenbrook: 6.65kW of solar with a 13.92kWh FoxESS battery.

Starting on the roof, 14 Trina panels are set out in groups on the Colorbond, including a straight row of three across the back that looks down over the shed and the veggie beds. The sheeting was in good nick, so the rails went on clean and level.

Down below, everything went into the covered area by the side gate, sheltered from the weather but easy to get to. The FoxESS H1 inverter is on the wall at eye height with its isolators beside it, and the battery sits directly underneath on the tiles, with a steel bollard at the front corner. FoxESS batteries are modular, so more capacity can be added later if needed.

System Specifications
Inverter: 5kW FoxESS H1 hybrid, wall-mounted
Solar Capacity: 6.65kW, 14 x Trina Solar Vertex S+ 475W panels
Battery Storage: 13.92kWh FoxESS, directly below the inverter
Location: Ellenbrook, WA 6069

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.



We just installed 7.6kW of solar and a 24.96kWh GoodWe battery in Dayton.A newer home on a newer street, and a good time...
06/10/2026

We just installed 7.6kW of solar and a 24.96kWh GoodWe battery in Dayton.

A newer home on a newer street, and a good time to get solar and storage sorted. The roofline is typical of the area, with lots of short hips and not many long runs, so rather than force the 16 Trina panels into one block they were spaced out in small groups along the Colorbond ridge. From the street they read as a neat, even line.

In the garage, the GoodWe ESA stands against the cream brick with three battery modules under the inverter. It's right where the car pulls in, so it got a bollard on each side instead of the usual one. The 10kW inverter also leaves plenty of room to add panels or another battery module later.

System Specifications
Inverter: 10kW GoodWe ESA Series hybrid
Solar Capacity: 7.6kW, 16 x Trina Solar Vertex S+ 475W panels in small groups
Battery Storage: 24.96kWh GoodWe ESA, three modules between two bollards
Location: Dayton, WA 6055

If you'd like a quote on a system like this, simply type “quote” below and we'll get in touch.

To find out more or see more of our installations, head across to our website.

GoodWe Australia and New Zealand Trinasolar

Address

60 Matison Street
Southern River, WA
6110

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Telephone

+61473863329

Alerts

Be the first to know and let us send you an email when DMG Solar & Electrical posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DMG Solar & Electrical:

Shortcuts

Share