Engineering Training Institute Australia - ETIA

Engineering Training Institute Australia - ETIA The premier provider of technical and professional engineering workshops, seminars and training courses.

The Engineering Training Institute Australia (ETIA) was formed in 1998 under the banner of “Cement & Concrete Services”. ETIA has grown over the years to now embrace a suite of over 40 topics from a variety of specialised areas. We pride ourselves on keeping abreast of the changes and challenges in the industry so as to ensure that all of our seminars, workshops and publications are both relevant

and accurate to satisfy the educational requirements of our attendees. In maintaining our mission to be “the premier provider of technical and professional engineering workshops & seminars throughout Australia” we endeavour to add and improve upon our suite of topics.

TRANSMISSION & COMMUNICATION TOWERS (POWER POLES) DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 22 + Wed...
08/09/2026

TRANSMISSION & COMMUNICATION TOWERS (POWER POLES) DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 22 + Wed 23 September 2026. Register today. https://www.etia.net.au/event/transmission-communication-towers-design-workshop-zoom

* TRANSMISSION & COMMUNICATION TOWERS (POWER POLES) DESIGN WORKSHOP (16 hrs CPD) – ZOOM
Tue 22 + Wed 23 September 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Tower Basics
- Transmission Tower: Structural Design (Using Hand Calculations)
- Foundation Design for Transmission Towers: Structural Design (Using Hand Calculations)
- Communication Lattice Tower Basics
- Power Poles: Structural Design (Using Hand Calculations)
- Power Poles: Foundation Design (Using Hand Calculations)
- Power Poles (Miscellaneous)
Register now https://www.etia.net.au/event/transmission-communication-towers-design-workshop-zoom


For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

RESIDENTIAL SLABS & FOOTINGS DESIGN WORKSHOP will be presented by Paul Uno on Tue 15 + Wed 16 September 2026 via ZOOM. B...
01/09/2026

RESIDENTIAL SLABS & FOOTINGS DESIGN WORKSHOP will be presented by Paul Uno on Tue 15 + Wed 16 September 2026 via ZOOM. Book now! https://www.etia.net.au/event/residential-slabs-footings-workshop-zoom

RESIDENTIAL SLABS & FOOTINGS DESIGN WORKSHOP (16 hrs CPD) – ZOOM
Tue 15 + Wed 16 September 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Soil Properties and Soil Suction
- Site Classification & Swelling Potential
- Domestic Construction Considerations (as per AS2870)
- Concrete Mix Design & On-Site Concrete Placement
- Soil Capacity, Applied Loads, Ultimate vs Allowable Bearing Capacity
- Slab Design Complying with Method # 3.0-AS2870 vs Chart 4.1
- Engineered Design ( # 4.0 AS 2870) plus Steel Screw & Bored Concrete Piers Design
Register now https://www.etia.net.au/event/residential-slabs-footings-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

STRUCTURAL STEEL DESIGN WORKSHOP will be presented by Paul Uno on Tue 8 + Wed 9 September 2026 via ZOOM. Book now! https...
01/09/2026

STRUCTURAL STEEL DESIGN WORKSHOP will be presented by Paul Uno on Tue 8 + Wed 9 September 2026 via ZOOM. Book now! https://www.etia.net.au/event/structural-steel-design-workshop-zoom

STRUCTURAL STEEL DESIGN WORKSHOP (16 hrs CPD) – ZOOM
Tue 8 + Wed 9 September 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Materials
- Design Codes
- Structural Analysis
- Beams & Girders
- Web Stiffeners/Tension Members
- Compression Members & Beam Columns
- Connections
- Framing Systems & Failures
Register now https://www.etia.net.au/event/structural-steel-design-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

PILE FOUNDATIONS DESIGN GEOTECHNICAL WORKSHOP will be livestreamed by Paul Uno on Tue 1 + Wed 2 September 2026. Register...
31/08/2026

PILE FOUNDATIONS DESIGN GEOTECHNICAL WORKSHOP will be livestreamed by Paul Uno on Tue 1 + Wed 2 September 2026. Register today. https://www.etia.net.au/event/pile-foundations-design-geotechnical-workshop-zoom

* PILE FOUNDATIONS DESIGN GEOTECHNICAL WORKSHOP (16 hrs CPD) – ZOOM
Tue 1 + Wed 2 September 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Soil Geotechnical Basics
- Settlement of Pile Foundations
- Single Piles - Axial Loads
- Single Piles - Lateral Loads
- Pile Group - Axial & Lateral Loads
- Piles on Rocks
- Screw Piles (in Clay & Sand)
- Dynamic Piling
Register now https://www.etia.net.au/event/pile-foundations-design-geotechnical-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

RISK MANAGEMENT WORKSHOP will be livestreamed by Ross Finnie and Paul Uno on Thu 27 August 2026. This workshop fulfils t...
17/08/2026

RISK MANAGEMENT WORKSHOP will be livestreamed by Ross Finnie and Paul Uno on Thu 27 August 2026. This workshop fulfils the CPD 10-hour requirements. Register today. https://www.etia.net.au/event/risk-management-workshop-zoom

* RISK MANAGEMENT WORKSHOP (10 hrs CPD) – ZOOM
Thu 27 August 2026 (8am - 6pm AEST)
After attending this course, you should have an understanding of:
- Risk & Failures in the engineering & building industry
- WHS risk management
- High risk construction work & managing risk
- Safety in design
Register now https://www.etia.net.au/event/risk-management-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

REINFORCED CONCRETE DESIGN WORKSHOP: MODULE ONE will be presented via Zoom by Paul Uno on Tue 25 + Wed 26 August 2026. R...
05/08/2026

REINFORCED CONCRETE DESIGN WORKSHOP: MODULE ONE will be presented via Zoom by Paul Uno on Tue 25 + Wed 26 August 2026. Register today. https://www.etia.net.au/event/reinforced-concrete-design-workshop-module-1-zoom

* REINFORCED CONCRETE DESIGN WORKSHOP: MODULE ONE (16 hrs CPD) – ZOOM
Tue 25 + Wed 26 August 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Basics of AS3600-2018
- Design Strength
- Beam Deflection
- Slab Deflection
- Column Design
- Wall Design
- Shear Design
- Footing Design
- Development Lengths & Detailing of Reinforcement
Register now https://www.etia.net.au/event/reinforced-concrete-design-workshop-module-1-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

ACCOUNTING & MANAGEMENT FOR ENGINEERS COURSE will be presented via Zoom by Vincent Uno and Samuel Uno on Thu 20 August 2...
03/08/2026

ACCOUNTING & MANAGEMENT FOR ENGINEERS COURSE will be presented via Zoom by Vincent Uno and Samuel Uno on Thu 20 August 2026. Register today. https://www.etia.net.au/event/accounting-management-for-engineers-course-zoom

* ACCOUNTING & MANAGEMENT FOR ENGINEERS COURSE (8 hrs CPD) – ZOOM
Thu 20 August 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Tax deductions prescribed for the engineering profession
- The pros and cons of various trading structures
- Techniques and strategies for achieving goals and objectives
- Policy and procedure development to ensure quality control
- How to read and understand financial statements
- Setting employee charge rates to ensure a return on investment
Register now https://www.etia.net.au/event/accounting-management-for-engineers-course-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

PRESTRESSED CONCRETE DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 18 + Wed 19 August 2026. Register tod...
29/07/2026

PRESTRESSED CONCRETE DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 18 + Wed 19 August 2026. Register today. https://www.etia.net.au/event/prestressed-concrete-design-workshop-zoom

* PRESTRESSED CONCRETE DESIGN WORKSHOP (16 hrs CPD) – ZOOM
Tue 18 + Wed 19 August 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Introduction to PSC
- Load Balancing, Losses & Uncracked Sections
- Flexural Strength
- Strength at Transfer & Elastic Cracked Section Analysis
- PSC Shear Strength
- Anchorage of PT Cables
- PSC Design Examples by Hand
- Practical Design & Issues
Register now https://www.etia.net.au/event/prestressed-concrete-design-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

GLASS & ALUMINIUM FAÇADE DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 11 + Wed 12 August 2026. Register...
27/07/2026

GLASS & ALUMINIUM FAÇADE DESIGN WORKSHOP will be presented via Zoom by Paul Uno on Tue 11 + Wed 12 August 2026. Register today.
https://www.etia.net.au/event/glass-aluminium-facade-design-workshop-zoom

* GLASS & ALUMINIUM FAÇADE DESIGN WORKSHOP (16 hrs CPD) – ZOOM
Tue 11 + Wed 12 August 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Glass Properties (incl. Thermal)
- Glass Acoustics
- Glass Panel Wind Design AS1288
- Aluminium Properties & Glass Design
- Curtain Wall Design
- Connections, Deflections, Movements, Tolerances & Er****on
- Curtain Wall Façade Testing
Register now https://www.etia.net.au/event/glass-aluminium-facade-design-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

INDUSTRIAL BUILDINGS DESIGN WORKSHOP will be presented by Ian Hymas on Thu 18 June 2026 via Zoom. Book now! https://www....
05/06/2026

INDUSTRIAL BUILDINGS DESIGN WORKSHOP will be presented by Ian Hymas on Thu 18 June 2026 via Zoom. Book now! https://www.etia.net.au/event/industrial-buildings-design-workshop-zoom

INDUSTRIAL BUILDINGS DESIGN WORKSHOP (8 hrs CPD) – ZOOM
Thu 18 June 2026 (9am - 5pm AEST)
After attending this course, you should have an understanding of:
- Portal Frame Analysis and Design
- Roof and Wall System
- Connections in Industrial Buildings
- Deflections, Tolerances, Case Studies
Register now https://www.etia.net.au/event/industrial-buildings-design-workshop-zoom

For more details and our full list of courses, head to our website www.etia.net.au or tap the link https://www.etia.net.au/events/course-list

Address

PO Box 913
Sydney, NSW
2153

Opening Hours

Monday 8:30am - 5:30pm
Tuesday 8:30am - 5:30pm
Wednesday 8:30am - 5:30pm
Thursday 8:30am - 5:30pm
Friday 8:30am - 5:30pm

Telephone

+612 9899 7447

Website

Alerts

Be the first to know and let us send you an email when Engineering Training Institute Australia - ETIA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Engineering Training Institute Australia - ETIA:

Shortcuts

Share