Ezi-Lift Products Australia Pty Ltd

06/05/2024

06/05/2024

May Madness has started and do we have some deals for you…

Pop into our showroom and checkout the range of lifting solutions we can offer to safely and competently complete any materials handling job on hand.

The GUIL TORO series lifters are available in both standard and compact series from 170KG @ 2.9M all the way up to 400KG @ 8M.

Our centre lift GUIL ELC range starts at 110KG @ 3M and goes all the way up to 280KG @ 5.2M.

These lifters offer a vast range of trades a safe and easy way to manage their materials handling requirements.

Each model comes with a range of accessories suited to your task at hand –
- Tyne Extensions
- Pipe Cradles
- Load Platforms
- Jib Booms
- Load Platforms
- Roller Door Cradles
- Fork Wideners
- Glass Suckers
- Counterbalance Kit

With the additional bonus of being able to convert the standard models into a counterbalance unit within minutes with no tools required.

Get in touch today to find out more.
P: 1300 394 543
E: [email protected]
W: https://www.ductlift.com.au/guil-lifters
Y: TORO Series: https://youtu.be/0pioArn13nY?si=BwXg6071jEbQjCU2
Y: ELC Series: https://youtu.be/HdE3YXSDE2k?si=KaEe9swMhLD1yxme

# guillifter

22/04/2024

22/04/2024

Check out the all new SP7 spidercrane..
Industry leading technology in a “do it all” compact chassis, built to take on any task at hand fast, efficient and safely..
Contact us today to find out how this unit can put you ahead of the pack with its innovative features and cost cutting features… SPT Crane 💪🏻

20/03/2024

We have more ALL NEW GUIL ELC-725's on the way !!

Get in FAST if you don't want to miss out...

▪ Load platform height of only 1.38m
▪ Unbeatable ease of loading to lift 125 kg to 4.00 metres.
▪ Its special design allows it to be placed right next to the wall.
▪ Levelling jacks on all four legs for a guaranteed perfectly vertical lifting.
▪ Compact base (45 x 50 cm) and small footprint for work in reduced spaces.
▪ Load tray included (Ref. BC-10: 50 x 55 cm).
▪ Fold-down legs with swivel wheels with brakes and levellers.
▪ 260 mm flat-free wheels on the base for transport over rough ground.
▪ Fold-down winch arm (two positions) fitted with a handle and wheel for transportation in horizontal position.

As an added bonus to say thank you, all orders secured with a deposit prior to March 31st 2024 will receive a $100 JB HiFi Gift Voucher.*

Get in touch today to find out more.

P: 1300 394 543
E: [email protected]
W: https://www.ductlift.com.au/guil-lifters
Y: https://www.youtube.com/watch?v=HdE3YXSDE2k&t=1s
B: https://tinyurl.com/52v2s83r
Everyone

01/02/2024

💥💰💥 Opportunity…. 💥💰💥

Hi All,

I’m looking for a diesel mechanic / plant mechanic / hydraulic technician / auto electrician for both workshop and on road services.

Any and all may apply as we have multiple positions available.

Duties would include regular servicing, maintenance and repairs of MEWP’s such as Scissor Lifts, Boom Lifts, Telehandlers and Forklifts.

Construction White Card, EWP and High Risk Boom and Forklift licences favourable but not necessary. Can be supplied to the correct fit applicant.

Current drivers licence a must.

Immediate start for the right applicant.

Workshop based out of Smeaton Grange.

Competitive hourly rates paid with fully maintained car, fuel card, phone, laptop, uniform etc all supplied.

Flexible work hours available.

On the job training supplied by OEM equipment manufacturers.

Come join and Australian Owned Family Business and start growing your bank balance whilst improving your lifestyle.

If this role is not for you maybe you know someone looking for a career change or looking to better themselves in a new workplace and or career path?

Send them our way and receive a MASSIVE $2k spotters fee* (Must have correct qualifications and be in the role for a minimum of 6 months).

Appreciate everyone’s time and effort.

Share… Share… Share. 👍🏻

22/01/2024

Looking for a Yard Hand to complete general duties and yard / equipment maintenance and a 3rd or 4th year apprentice to assist in the maintenance of Plant Equipment at Smeaton Grange… DM me for more info or if you know anyone that might be.

01/03/2023

⭐️ We are hiring ⭐️ Employment Opportunity ⭐️

Due to continuing growth Ezi-Lift is currently seeking a full time mechanic to fulfill workshop and road service technician duties from our Smeaton Grange facilities…

Think your a fit for the job or know someone who is..?

Join an Australian owned and operated business with strong family values. We are looking for the right person to join our team.

17/02/2023

*** WE ARE HIRING ��***

An exciting opportunity has become available for a new Full time MR/HR driver for tilt tray work.

A brand NEW vehicle is on offer and awaiting the right person.

• Job predominantly transport of Elevated Work Platforms - EWP’s in and around Sydney metro area.
• Tilt tray experience necessary.
• On the job training supplied to the right candidate.
• Competitive pay + overtime available
• Join a team committed to “Zero Harm”

Job responsibilities:
• Safe operation of company vehicles and equipment.
• Daily prestart and maintenance checks on vehicles and equipment.
• Safe loading and unloading of truck.
• Maintaining a clean truck to a high standard
• Strong customer service focus
• Comply with all relevant fatigue management rules, regulations and training

What we offer:
• Uniforms and PPE provided
• Good conditions and competitive pay
• New fully maintained vehicle
• Company phone

Skills and experience:
• A current and experienced MR/HR licence with a good driving record
• Previous / Current tilt tray operation experience
• Mechanical aptitude
• A strong commitment to safety and willingness to work autonomously and as a part of a team

How to apply:
To apply please submit your current resume to
• [email protected]

Please note; applicants for this role may be subject to the following pre-employment checks;
• Evidence of right to work in Australia
• Medical assessment
• Driving History check

Good Luck
“The Ezi-Lift Team”

29/11/2022

You've spoken and we've listened...

The ALL NEW GUIL ELC-725 is on the way !!

▪ Load platform height of only 1.38 m: unbeatable ease of loading to lift 125 kg to 4.00 metres.
▪ Its special design allows it to be placed right next to the wall.
▪ Levelling jacks on all four legs for a guaranteed perfectly vertical lifter.
▪ Compact base (45 x 50 cm) and small footprint for work in reduced spaces.
▪ Load tray included (Ref. BC-10: 50 x 55 cm).
▪ Fold-down legs with swivel wheels with brakes and levellers.
▪ 260 mm flat-free wheels on the base for transport over rough ground.
▪ Fold-down winch arm (two positions) fitted with a handle and wheel for transportation in horizontal position.

As an added bonus, all orders secured with a deposit prior to December 23rd 2022 will receive a $100 JB HiFi Gift Voucher.*

Get in touch today to find out more.
P: 1300 394 543
E: [email protected]
W: https://www.ductlift.com.au/guil-lifters
Y: https://www.youtube.com/watch?v=HdE3YXSDE2k&t=1s
B: https://tinyurl.com/52v2s83r

26/10/2022

Not sure what type of lifter you need?
Pop into our showroom and checkout the range of lift solutions we can offer you to safely complete any lift on site...

The GUIL TORO series lifters..
Available in both Standard and Compact* series from
170kg @ 2.9m all the way to 400kg @ 8.0m.

These lifters offer a vast range of trades a safe and easy way to manage their material handling requirements.

Each model comes with a range of accessories suited to your task at hand including -
- Tyne extensions
- Pipe cradles
- Load Platforms
- Jib Booms
- Roller Door Lifters
- Fork wideners
- Glass suckers

With the additional bonus of easily transitioning into a counterbalance unit within minutes with a simple counterbalance kit.

Get in touch today to find out more.
P: 1300 394 543
E: [email protected]
W: https://www.ductlift.com.au/guil-lifters
Y: https://youtu.be/0pioArn13nY

10/10/2022

*** WE ARE HIRING ��***

An exciting opportunity has become available for a new Full time MR/HR driver for tilt tray work.
• Job predominantly transport of Elevated Work Platforms - EWP’s in and around Sydney metro area.
• Tilt tray experience necessary.
• On the job training supplied to the right candidate.
• Competitive pay + overtime available
• Join a team committed to “Zero Harm”


Job responsibilities:

• Safe operation of company vehicles and equipment.
• Daily prestart and maintenance checks on vehicles and equipment.
• Safe loading and unloading of truck.
• Maintaining a clean truck to a high standard
• Strong customer service focus
• Comply with all relevant fatigue management rules, regulations and training

What we offer:

• Uniforms and PPE provided
• Good conditions and competitive pay
• New fully maintained vehicle
• Company phone

Skills and experience:

• A current and experienced MR/HR licence with a good driving record
• Previous / Current tilt tray operation experience
• Mechanical aptitude
• A strong commitment to safety and willingness to work autonomously and as a part of a team

How to apply:

To apply please submit your current resume to • [email protected]

Please note; applicants for this role may be subject to the following pre-employment checks;

• Evidence of right to work in Australia
• Medical assessment
• Driving History check


Good Luck

“The Ezi-Lift Team”

Leading Manufacturer and Supplier of Materials Handling & Access Equipment. Ezi-Lift, Genie, Sumner, JLG, Merlo...