13/06/2026
The questions about our Tractor CommandARM to Universal Display Adaptor Harness keep coming, and with so many sold, we thought we’d show the entire process from start to finish. 👌
In this video, Jarrod takes you through a real-world installation in the field, including:
✅ Removing the existing display setup
✅ Installing a Gen 5 Universal Display into the CommandARM
✅ Setting up ISOBUS VT and display layouts
✅ Demonstrating machine functions and showing what carries across to the new display
✅ Troubleshooting common setup issues
✅ What to do if you’re presented with fault codes or your implement PTO doesn’t display correctly
One of the biggest questions we get asked is whether machine functions continue to work after the upgrade.
As you’ll see in the video, they do, and Jarrod walks through the setup and operation so you can see it for yourself. The only thing you may loose is engine hours, but an MTG will ensure that data does to Operations Center.
We also cover another common concern: whether a Gen 5 will physically fit in the CommandARM position. As you’ll see, there’s plenty of clearance throughout the full range of adjustment and operation.
If you’ve been considering upgrading your display but weren’t sure what was involved, this video should answer many of the questions we receive every week.
A big thank you to the grower near Coleambally, NSW who invited us onto the farm and allowed us to film the installation process so we could share it with others considering the upgrade.
Got another question we haven’t covered?
Chances are we have on our website - BUT please feel free to drop it in the comments and we’ll do our best to answer it.
Product information, FAQs, and ordering links are in the comments. 👇
