Hootons Harnesses

Directions

Hootons Harnesses Main Business page for Hootons harnesses

Barra ecu and wiring conversion specialist

13/10/2026

BA zf6 people - I've been working on adding code into the BA ecu for it to operate with the zf6. Has taken a bit to get it sorted but I'm now looking for someone to do some beta testing, can only test so much without putting into an actual ba with a zf.

I'll supply the zf6 patch loom, ecu flash and support. You will need to understand we are doing some development and need to do some back and forth with canbus captures and ecu flashes.
Someone local to carrum downs/south east Melbourne would be preferred.

This video is a BA ecu running the zf6 natively with no module including working torque cut, which BA ecu never came with via can, so its drivable and really only requires a few small tweaks from here - the box in the video is going through adaptions at the moment so just cruising around while it learns but it drives nice.
Happy to throw in the zf6 transbrake for your troubles...

Back to wiring - more patch looms!This one is to suit a haltech r3 in a gen2 coyote powered circuit car.Utilising and re...
09/10/2026

Back to wiring - more patch looms!
This one is to suit a haltech r3 in a gen2 coyote powered circuit car.

Utilising and repurposing the oem mustang engine harness worked out well, combined with the r3 onboard pdm the patch loom is a nice package.

Fitted with some fuel pump and dash wiring, super clean result!

U03010 - software incompatibility/software mismatch - a code a lof of people with zf6 used in swaps will have seen!With ...
08/10/2026

U03010 - software incompatibility/software mismatch - a code a lof of people with zf6 used in swaps will have seen!
With a small code change we now have the ability to bypass this so the ECU and TCM will talk happliy no matter which version.
At this stage I have only tested within the model family - ie BF to any BF tcm, FG-FGx with any FG-FGx tcm, but in theory it should allow for a bit more mix/match to happen across some models.

This really only makes sense when the ECU/TCM cant be flashed together, it is however super handy if you have an unknown tcm version and are sending your ecu away to be flashed to work in a conversion. It's not a magic fix for all situations, in some cases its stil preferable to flash the tcm with a fresh file which we can do remotely with the correct dongle.

Just another little way to help smooth out some of the conversion process!

Thought I should do a post just checking in!September was a rough month for me being sick with the flu for pretty much t...
07/10/2026

Thought I should do a post just checking in!
September was a rough month for me being sick with the flu for pretty much the whole month, so everything has been pushed back a bit and contact was a bit patchy.
I'm finally back to normal and think I'm up to date on messages etc - if I have missed your message send it again and ill get back to you.

The downtime did allow me to do some other work over that time which includes a few circuit boards.

This little guy allows me to do basic btr control on a lower spec ecu like a 750/t2 without adding relays, making for a less bulky harness and quicker production, win win!

Its amazing having access to create boards like this that simplify and improve existing processes, I have a bunch more in the works which I'll post about as the pop up.

31/08/2026

First fire up of the maxxecu race gen2 equipped ve went well today!
A few small things to work out in the software before start up but thats just me not being familiar with the maxxecu yet, George and I got it sorted.

This is a complete ecu replacement with no external modules - the patch loom utilises the oem wiring and the maxxecu runs lua scripts to control the canbus.
The canbus is doing what we want, has been a smooth process so far, very happy with it!

8hp connection is next before it goes on the dyno at proflow. Happy days.

Another project I've been working on for a while - boost control on non turbo ecus!I was able to shuffle the outputs aro...
28/08/2026

Another project I've been working on for a while - boost control on non turbo ecus!
I was able to shuffle the outputs around so this works on all ba-fgx ecus - that means v8, bf btr, fg 5 speed, fg lpi - all models.
This retains all oem functions also, so speed sensor out will work for conversion cars.

No boost sensor is required as the boost sensor data is emulated off the map input so that saves an input and all code follows the oem gates, cells and tables.

Will need to test across a few different models before I say im 100% happy but the live car tests have all followed the bench tests so far.

It does require a custom ecu patch which is available through me by mail or remote flash or available through chosen tuners.

So good being able to open up the hardware options!

We had nathans clean bf in which was turbo converted well over 10 years ago and was running an after market wolf ecu.
We decided to revert it back to a stock bf n/a 4speed ecu which now thanks to Hootons Harnesses we have been able to achieve and test factory boost control via the n/a ecu and it is working flawlessly in open loop and closed loop as a factory turbo ecu would! This is now a game changer no need for finding turbo ecus or after market boost controllers!
We finished up dyno tuning it with 300rwkw on 98!

With lots of maxxecu and 8hp talk happening lately I'd been keen to get involved, luckily George at proflow had the righ...
25/08/2026

With lots of maxxecu and 8hp talk happening lately I'd been keen to get involved, luckily George at proflow had the right project!

Here is a VE to maxxecu race gen2 patch loom to suit 8hp - bit of a monster but we wanted the ecu in the car, so it needs to be a longboi.

I held off on posting this until I could confirm it was something I could make work to the level we all want, but seems to be over that hump now!
I'm most of the way through the canbus decode and have working examples of the maxxecu lua scripts loaded and working on the bench, happy days so far. We're aiming for an oem level feel so even having things like fuel average working is the goal and looks doable.

Has been a bit of a mission, will make another post with some proper progress when its all up and running which should happen within a week at this stage.

Apologies for being slack on messages recently - have a few projects like this happening which eat up a ton of time. Will try to do better on the front moving forward.

Another thing I've been working on has been a way to improve the process for ecu/tcm programming for the zf6 swaps. Ther...
12/08/2026

Another thing I've been working on has been a way to improve the process for ecu/tcm programming for the zf6 swaps. Theres alot of great guys that can do this locally but it's really not something many people are well versed in.

I now have the ability to flash the ecu/tcm remotely, you will need a dongle like tactrix, obdx ft or vlink fs. The vlink is around $50 so it's a pretty appealing option but I can offer support for most dongles that have 18v feps.

The app is controlled by me on my end, you just load it up and connect the dongle. You can do a few pre connection checks like checking canbus health and making sure the ecu/tcm are active. A code read/clear function is included just in case and I will add support for pairing ecus to cars in future. This will also do full write so any incorrect tcm (ie bf tcm in fg) is now alot easier to work around.

I used this with a customer on monday and it all went nice and smooth so its something I can now offer.
It currently works on windows pc, below is the Android app which is still in testing stages but will be available soon!

You might have seen a few of my posts or stories with some custom ecu code happening - the biggest aim has been opening ...
08/08/2026

You might have seen a few of my posts or stories with some custom ecu code happening - the biggest aim has been opening up the hardware to make parts alot easier to use.

One project was late FG2-FGX, which includes the 6hp21 - like the harness pictured below. We now have an easy method for full pats removal and cruise via analogue input like ba-fg1 - fg2-fgx are cruise via canbus from oem. This was really the main issues stopping the later model tunes being good candidates for swaps.

Will be great to see the 6hp21 actually get some use, will be fine for na setups and should be a few sitting around!

I also did that thing where I feel like I'm too busy to post again, I've got lots of other fixes coming to make hardware more flexible so I'll try to stay ontop of that đŸ˜†

Cody from arktik motorsports dropped off his turbo LS R35 for a little work this week.It was wired using a Haltech rebel...
18/03/2026

Cody from arktik motorsports dropped off his turbo LS R35 for a little work this week.

It was wired using a Haltech rebel ls and ic7 running the entire car with a body loom built by me a while ago now - love to see it still in great shape!

Amongst a few changes like front/rear brake light strip and a quick tidy up, we moved the isolator and printed a nice case/bracket for it so its protected and contained.

So good being able to print designs like this to tidy up installs!

Address

Wantirna South, VIC

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Hootons Harnesses posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share