Apple SolarZ

11/03/2026

BIPV Solar (Building Integrated Photovoltaics) is an innovative solar technology that allows buildings to generate electricity using solar panels integrated directly into the structure of the building.

Instead of installing traditional solar panels on the roof, BIPV systems replace conventional building materials such as glass, roof tiles, or facades while producing clean solar energy.

In this video you will learn:
🔹 What BIPV Solar Technology is
🔹 How BIPV panels are installed in buildings
🔹 Advantages of BIPV compared with traditional solar systems
🔹 Applications in homes, offices, and commercial buildings

🌱 Why BIPV is Important:
✅ Generates renewable energy
✅ Saves space on rooftops
✅ Enhances modern building design
✅ Reduces electricity costs
✅ Supports sustainable architecture

BIPV is considered one of the most promising technologies for future smart cities and green buildings.

📌 Watch the full video to understand how solar power can become part of the building itself.

👍 Don’t forget to Like, Comment & Subscribe for more solar energy and renewable technology content.

🔎 Hashtags

11/03/2026

Solar DC Pump

11/03/2026

Solar Hybrid System.

10/03/2026

📌☀️ DC Solar Power Bank – নিরবচ্ছিন্ন বিদ্যুতের স্মার্ট সমাধান!

📝 Description:
লোডশেডিং বা বিদ্যুৎ সমস্যায় আর চিন্তা নয়!
Tawrat Technology DC Solar Power Bank নিয়ে এসেছে নির্ভরযোগ্য এবং আধুনিক সোলার পাওয়ার সমাধান।

🔋 LifePO4 Battery Support
📟 Digital Display System
☀️ Efficient Solar Charging
⚡ Reliable DC Backup Power
🏠 বাসা, দোকান, CCTV, WiFi, LED Light ইত্যাদির জন্য উপযোগী

বিদ্যুৎ না থাকলেও আপনার প্রয়োজনীয় ডিভাইস চালু থাকবে নিরবচ্ছিন্নভাবে।

📞 অর্ডার করতে এখনই কল করুন:
01714272246

🌞 Reliable Energy Solution

14/05/2024

How can Install Huawei SUN2000 90KTL -105KTL Solar On-grid Inverter.
Installing a Huawei SUN2000 series solar on-grid inverter involves several steps to ensure proper setup and operation. Here's a general guide:

Location Selection: Choose a suitable location for the inverter installation. It should be well-ventilated, away from direct sunlight, and protected from moisture.

Mounting: Mount the inverter on a sturdy surface using appropriate mounting hardware. Ensure that it is installed in a vertical position with sufficient clearance for airflow.

Electrical Connections:

DC Side: Connect the DC input terminals of the solar panels to the DC input terminals of the inverter. Make sure to observe correct polarity and tighten the connections securely.
AC Side: Connect the AC output terminals of the inverter to the electrical distribution panel or grid connection point using appropriate wiring and conduit. Again, ensure proper polarity and secure connections.
Grounding: Properly ground the inverter according to local electrical codes and manufacturer guidelines. This typically involves connecting the grounding terminal of the inverter to a grounding electrode system.

Communication Setup: If the inverter supports monitoring or communication features, set up any required communication interfaces such as Ethernet or Wi-Fi for remote monitoring and management.

Configuration: Follow the manufacturer's instructions to configure the inverter settings according to your specific installation requirements. This may include setting voltage and frequency parameters, grid connection settings, and any other necessary adjustments.

Testing and Commissioning: Once the installation is complete, perform a thorough testing and commissioning process to ensure that the inverter is functioning correctly. Check for proper voltage and current levels, grid synchronization, and any error messages or alerts.

Documentation and Compliance: Keep detailed records of the installation process, including equipment specifications, wiring diagrams, and any permits or approvals obtained. Ensure that the installation complies with local electrical codes and regulations.

Maintenance: Regular maintenance of the inverter is essential to ensure optimal performance and longevity. This may include periodic inspections, cleaning, and firmware updates as recommended by the manufacturer.

Safety: Throughout the installation process, prioritize safety by following all relevant safety guidelines and procedures. This includes using appropriate personal protective equipment (PPE) and working with qualified electricians or technicians if necessary.

Always refer to the specific installation manual and guidelines provided by Huawei for the SUN2000 series inverters, as procedures may vary depending on the model and regional requirements. If you're not comfortable with any aspect of the installation, it's advisable to seek assistance from a qualified professional.

13/05/2024

Solar Rooftop Mounting System for Solar Panels
Selecting the right rooftop mounting system for solar panels is crucial for the efficiency, longevity, and safety of your solar installation. Here are some key considerations and types of mounting systems commonly used:

Roof Type: Different types of roofs (e.g., flat, sloped, tiled, metal) require specific mounting solutions. Ensure that the mounting system is compatible with your roof type and structure.

Weight Capacity: Consider the weight-bearing capacity of your roof and choose a mounting system that can support the weight of the solar panels, as well as any additional components like racking, inverters, and wiring.

Orientation and Tilt: The orientation and tilt angle of the solar panels impact their energy production. Adjustable mounting systems allow for optimizing the tilt angle based on factors such as latitude and seasonal variations.

Aerodynamics: Mounting systems should be designed to minimize wind resistance and uplift forces, especially in areas prone to high winds or extreme weather conditions.

Ease of Installation: Look for mounting systems that are easy to install and require minimal modifications to the roof structure. This can help reduce installation time and costs.

Durability and Corrosion Resistance: Choose mounting systems made from high-quality materials such as aluminum or stainless steel that are resistant to corrosion and degradation over time.

Warranty and Support: Check the warranty and support provided by the mounting system manufacturer to ensure reliability and assistance in case of any issues or defects.

Types of rooftop mounting systems include:

Rail-based Mounting Systems: These systems use rails that are attached to the roof structure, providing a framework for mounting solar panels. They offer flexibility in panel placement and orientation.

Rail-less Mounting Systems: These systems eliminate the need for rails by directly attaching the solar panels to mounting feet or brackets, which are secured to the roof surface. They can be quicker to install and may be more aesthetically pleasing.

Ballasted Mounting Systems: Ideal for flat roofs, ballasted mounting systems use weights or ballasts to secure the solar panels in place without penetrating the roof membrane. They are non-invasive and can be easily removed if needed.

Tile Hook Mounting Systems: Specifically designed for tiled roofs, tile hook mounting systems use hooks that fit under the roof tiles to secure the mounting rails or brackets.

Metal Roof Mounting Systems: These systems are designed to attach directly to metal roofs using clamps or brackets that grip onto the seams or ribs of the metal panels.

Before purchasing a rooftop mounting system, consult with a solar installer or engineer to assess your specific requirements and determine the most suitable option for your solar installation. Additionally, ensure that the mounting system complies with local building codes and regulations.

07/03/2024

Solar Feed In Tariff Explained

19/08/2023

Solar Street Light Install in Field.

19/08/2023