MICON, Ka-6/A, Bashundhara Road, Jagannathpur, Dhaka (2026)

12/10/2026

🏗️ 𝗣𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗠𝗮𝘁𝘁𝗲𝗿𝘀 𝗕𝗲𝗳𝗼𝗿𝗲 𝘁𝗵𝗲 𝗖𝗿𝗮𝗻𝗲 𝗠𝗼𝘃𝗲𝘀.

In an industrial building designed for overhead cranes, structural steel er****on is only part of the job.

Crane runway beams must be installed within the specified alignment and level tolerances. Errors in column positioning, beam elevation or runway geometry can create installation difficulties, excessive wear and operational problems.

That is why careful coordination matters from the beginning.

At MICON, we believe successful industrial construction depends on more than erecting a strong structure. It requires attention to engineering details, accurate ex*****on and coordination between design and site teams.

Because in industrial construction, precision is not an extra. It is part of performance.

𝗪𝗵𝗮𝘁 𝗱𝗼 𝘆𝗼𝘂 𝘁𝗵𝗶𝗻𝗸 𝗶𝘀 𝘁𝗵𝗲 𝗺𝗼𝘀𝘁 𝗼𝘃𝗲𝗿𝗹𝗼𝗼𝗸𝗲𝗱 𝗱𝗲𝘁𝗮𝗶𝗹 𝗱𝘂𝗿𝗶𝗻𝗴 𝘀𝘁𝗲𝗲𝗹 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲 𝗲𝗿𝗲𝗰𝘁𝗶𝗼𝗻?

𝗠𝗜𝗖𝗢𝗡 | 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱

11/10/2026

🏗️ 𝗦𝗠𝗔𝗟𝗟 𝗦𝗧𝗘𝗘𝗟 𝗠𝗘𝗠𝗕𝗘𝗥𝗦. 𝗕𝗜𝗚 𝗦𝗧𝗥𝗨𝗖𝗧𝗨𝗥𝗔𝗟 𝗥𝗘𝗦𝗣𝗢𝗡𝗦𝗜𝗕𝗜𝗟𝗜𝗧𝗬!

Ever wondered what supports the roof of a PEB building? Meet the 𝗣𝘂𝗿𝗹𝗶𝗻𝘀! 🔩

Purlins are secondary steel members that support roof sheeting and transfer roof loads to the main structural frame. But their role goes beyond simply holding the sheets.

✅ 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻: Support roof sheeting and transfer loads
✅ 𝗣𝗹𝗮𝗰𝗲𝗺𝗲𝗻𝘁: Installed across the main rafters or trusses
✅ 𝗗𝗲𝘀𝗶𝗴𝗻: Proper spacing and section selection based on roof loads, span, and structural requirements

⚠️ 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗜𝗻𝘀𝗶𝗴𝗵𝘁: Incorrect purlin spacing or an inadequate section can compromise roof performance and stability.

Remember, every steel member matters. 𝗦𝘁𝗿𝗼𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝘀 𝘀𝘁𝗮𝗿𝘁 𝘄𝗶𝘁𝗵 𝘀𝗺𝗮𝗿𝘁 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴.

🏗️ 𝗠𝗜𝗖𝗢𝗡 - 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱.

📞 +880 1844-509800
🌐 www.miconbuild.com

10/10/2026

🔥 𝗧𝗛𝗘 𝗦𝗘𝗖𝗥𝗘𝗧 𝗕𝗘𝗛𝗜𝗡𝗗 𝗛𝗢𝗧 𝗥𝗜𝗩𝗘𝗧𝗜𝗡𝗚: 𝗘𝗡𝗚𝗜𝗡𝗘𝗘𝗥𝗜𝗡𝗚 𝗜𝗡 𝗔𝗖𝗧𝗜𝗢𝗡!

Ever wondered how a simple red-hot rivet can hold massive steel structures together?

Here’s the science behind it. 👇

🔩 𝗛𝗲𝗮𝘁 𝗶𝘁. 𝗛𝗮𝗺𝗺𝗲𝗿 𝗶𝘁. 𝗟𝗲𝘁 𝗶𝘁 𝗰𝗼𝗼𝗹.

When a hot rivet is formed inside aligned steel plates, it contracts as it cools, creating a clamping force that helps hold the plates tightly together.

This traditional technique played a major role in building steel bridges and other iconic structures.

While modern steel construction widely uses high-strength bolts and welding, the principle remains the same: 𝘀𝘁𝗿𝗼𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝘀 𝗱𝗲𝗽𝗲𝗻𝗱 𝗼𝗻 𝗽𝗿𝗼𝗽𝗲𝗿𝗹𝘆 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗮𝗻𝗱 𝗲𝘅𝗲𝗰𝘂𝘁𝗲𝗱 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻𝘀.

At MICON, we believe engineering excellence lives in the details.

🏗️ 𝗠𝗜𝗖𝗢𝗡 - 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱.

08/10/2026

🏗️ Behind the Story | Making a Knitting Project

A successful knitting project starts long before the machines arrive.

From landscape planning to structural design, architectural design to machine layout, every decision plays a role in creating a functional and efficient industrial facility.

At MICON, we bring these stages together through a complete design-build approach, covering:

🔹 Landscape & Site Planning
🔹 Architectural Design
🔹 Structural Design
🔹 Machine & Production Layout Planning
🔹 Civil Construction
🔹 Steel Structure Works
🔹 Full Construction Ex*****on

The goal is not simply to build a structure.

It is to create a production-ready facility where design, engineering, construction and operations work together.

This is the story behind the construction, from the first plan to the final ex*****on.

MICON | Building Beyond

07/10/2026

🌱 𝗕𝗲𝗵𝗶𝗻𝗱 𝘁𝗵𝗲 𝗦𝘁𝗼𝗿𝘆 | 𝗠𝗮𝗸𝗶𝗻𝗴 𝗮𝗻 𝗘𝗧𝗣 𝗣𝗿𝗼𝗷𝗲𝗰𝘁

An ETP is more than tanks, pipes and equipment.

Behind every treatment plant is a process of engineering, coordination, construction and countless details that must come together to make the system work.

In this video, we take you 𝗯𝗲𝗵𝗶𝗻𝗱 𝘁𝗵𝗲 𝘀𝗰𝗲𝗻𝗲𝘀 𝗼𝗳 𝘁𝗵𝗲 𝗕𝗮𝘆 𝗧𝗮𝗻𝗻𝗮𝗿𝘆 𝗘𝗧𝗣 𝗣𝗿𝗼𝗷𝗲𝗰𝘁, 𝗮 𝟳𝟬𝟬 𝗺𝟯/𝗱𝗮𝘆 𝗘𝗳𝗳𝗹𝘂𝗲𝗻𝘁 𝗧𝗿𝗲𝗮𝘁𝗺𝗲𝗻𝘁 𝗣𝗹𝗮𝗻𝘁 delivered with 𝗣𝗿𝗼𝗴𝗼𝘁𝘆, 𝗜𝘁𝗮𝗹𝘆 𝗮𝘀 𝘁𝗵𝗲 𝗽𝗿𝗶𝗻𝗰𝗶𝗽𝗮𝗹 𝘀𝘂𝗽𝗽𝗹𝗶𝗲𝗿.

From civil construction and structural works to piping, equipment installation and coordination, every stage plays a role in turning a design into a functioning environmental solution.

At MICON, we believe industrial development and environmental responsibility should move together.

Because building a better industry also means building a more responsible future.

𝗠𝗜𝗖𝗢𝗡 | 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱

05/10/2026

🌧️ 𝗔 𝘀𝘁𝗿𝗼𝗻𝗴 𝗳𝗮𝗰𝘁𝗼𝗿𝘆 𝗻𝗲𝗲𝗱𝘀 𝗺𝗼𝗿𝗲 𝘁𝗵𝗮𝗻 𝗮 𝘀𝘁𝗿𝗼𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲. 𝗜𝘁 𝗻𝗲𝗲𝗱𝘀 𝗽𝗿𝗼𝗽𝗲𝗿 𝗱𝗿𝗮𝗶𝗻𝗮𝗴𝗲.

During heavy rain, water can quickly become an operational problem if the drainage system is not properly planned.

From 𝗿𝗼𝗼𝗳 𝗴𝘂𝘁𝘁𝗲𝗿𝘀 𝗮𝗻𝗱 𝗱𝗼𝘄𝗻𝗽𝗶𝗽𝗲𝘀 𝘁𝗼 𝘆𝗮𝗿𝗱 𝘀𝗹𝗼𝗽𝗲𝘀, 𝘁𝗿𝗲𝗻𝗰𝗵 𝗱𝗿𝗮𝗶𝗻𝘀, 𝗹𝗼𝗮𝗱𝗶𝗻𝗴 𝗮𝗿𝗲𝗮𝘀 𝗮𝗻𝗱 𝗱𝗶𝘀𝗰𝗵𝗮𝗿𝗴𝗲 𝗽𝗼𝗶𝗻𝘁𝘀, every part needs to work together.

Poor drainage can lead to:
• Waterlogging around the facility
• Damage to pavements and external works
• Disruption in loading and material movement
• Moisture-related maintenance issues
• Increased long-term costs

Good industrial design considers where the water comes from, where it will flow, and where it needs to go.

𝗕𝗲𝗰𝗮𝘂𝘀𝗲 𝗱𝗿𝗮𝗶𝗻𝗮𝗴𝗲 𝗶𝘀 𝗻𝗼𝘁 𝗮𝗻 𝗮𝗳𝘁𝗲𝗿𝘁𝗵𝗼𝘂𝗴𝗵𝘁. 𝗜𝘁 𝗶𝘀 𝗽𝗮𝗿𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗶𝗻𝗳𝗿𝗮𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲.

𝗠𝗜𝗖𝗢𝗡 | 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱

04/10/2026

🏗️ বিল্ডিং বা স্ট্রাকচারে ফাটল কেন ধরে?

সব ফাটল বিপজ্জনক নয়, তবে কারণটা জানা জরুরি। ভুল ডিজাইন, settlement, poor workmanship বা material issue, ছোট একটি crack-ও হতে পারে বড় সমস্যার warning sign.

04/10/2026

🏗️ 𝗪𝗵𝗮𝘁 𝗛𝗼𝗹𝗱𝘀 𝗮 𝗦𝘁𝗲𝗲𝗹 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗧𝗼𝗴𝗲𝘁𝗵𝗲𝗿?

A steel structure is more than a collection of columns and beams. Every structural member has a specific purpose-and they must work together as a complete system.

🔹 𝗖𝗼𝗹𝘂𝗺𝗻𝘀 transfer loads toward the foundation
🔹 𝗕𝗲𝗮𝗺𝘀 carry and transfer loads to supporting members
🔹 𝗥𝗼𝗼𝗳 𝗧𝗿𝘂𝘀𝘀𝗲𝘀 support the roof system and span larger distances
🔹 𝗣𝘂𝗿𝗹𝗶𝗻𝘀 support roof sheeting and transfer roof loads
🔹 𝗕𝗿𝗮𝗰𝗶𝗻𝗴 provides stability against lateral forces such as wind

But understanding the individual components is only part of the story.

A safe and efficient steel structure depends on 𝗽𝗿𝗼𝗽𝗲𝗿 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗹𝗼𝗮𝗱 𝗽𝗮𝘁𝗵𝘀, 𝗰𝗼𝗻𝗻𝗲𝗰𝘁𝗶𝗼𝗻𝘀, 𝗳𝗮𝗯𝗿𝗶𝗰𝗮𝘁𝗶𝗼𝗻, 𝗮𝗻𝗱 𝗲𝗿𝗲𝗰𝘁𝗶𝗼𝗻-because every member has a purpose, and every connection matters.

At 𝗠𝗜𝗖𝗢𝗡, we approach steel structures as complete engineered systems-from design to ex*****on.

𝗠𝗜𝗖𝗢𝗡 | 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱

03/10/2026

🏗️ 𝗢𝗻𝗴𝗼𝗶𝗻𝗴 𝗣𝗿𝗼𝗷𝗲𝗰𝘁 | 𝗞𝗻𝗶𝘁𝘄𝗲𝗮𝗿 𝗙𝗮𝗰𝘁𝗼𝗿𝘆

Construction is progressing steadily on this 𝗞𝗻𝗶𝘁𝘄𝗲𝗮𝗿 𝗙𝗮𝗰𝘁𝗼𝗿𝘆 𝗣𝗿𝗼𝗷𝗲𝗰𝘁, combining robust RCC construction with structural steel works to support efficient industrial operations.

From structure to ex*****on, every stage reflects our commitment to 𝗾𝘂𝗮𝗹𝗶𝘁𝘆, 𝘀𝗮𝗳𝗲𝘁𝘆, 𝗮𝗻𝗱 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗲𝘅𝗰𝗲𝗹𝗹𝗲𝗻𝗰𝗲.

𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱. 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗳𝗼𝗿 𝗜𝗻𝗱𝘂𝘀𝘁𝗿𝘆.

03/10/2026

🏗️ 𝗔 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗖𝗮𝗿𝗿𝗶𝗲𝘀 𝗠𝗼𝗿𝗲 𝗧𝗵𝗮𝗻 𝗝𝘂𝘀𝘁 𝗜𝘁𝘀 𝗢𝘄𝗻 𝗪𝗲𝗶𝗴𝗵𝘁.

Every industrial structure is exposed to different forces throughout its life.

• 𝗗𝗲𝗮𝗱 𝗟𝗼𝗮𝗱 - the permanent weight of the structure
• 𝗟𝗶𝘃𝗲 𝗟𝗼𝗮𝗱 - people, equipment and operational loads
• 𝗪𝗶𝗻𝗱 𝗟𝗼𝗮𝗱 - pressure and suction acting on the building
• 𝗦𝗲𝗶𝘀𝗺𝗶𝗰 𝗟𝗼𝗮𝗱 - forces generated as the structure responds to earthquake ground motion

The key to a safe structure isn’t simply 𝘂𝘀𝗶𝗻𝗴 𝗺𝗼𝗿𝗲 𝘀𝘁𝗲𝗲𝗹.

It starts with understanding the right design loads, performing proper structural analysis, and developing an efficient structural system that can safely transfer those forces to the foundation.

Because when it comes to structural engineering:

𝗠𝗼𝗿𝗲 𝘀𝘁𝗲𝗲𝗹 ≠ 𝗕𝗲𝘁𝘁𝗲𝗿 𝗱𝗲𝘀𝗶𝗴𝗻.
𝗥𝗶𝗴𝗵𝘁 𝗹𝗼𝗮𝗱𝘀 + 𝗥𝗶𝗴𝗵𝘁 𝗮𝗻𝗮𝗹𝘆𝘀𝗶𝘀 + 𝗥𝗶𝗴𝗵𝘁 𝗱𝗲𝘀𝗶𝗴𝗻 = 𝗦𝗺𝗮𝗿𝘁𝗲𝗿 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲.

At 𝗠𝗜𝗖𝗢𝗡, we focus on engineering industrial structures for safety, efficiency and long-term performance.

𝗠𝗜𝗖𝗢𝗡 | 𝗕𝘂𝗶𝗹𝗱𝗶𝗻𝗴 𝗕𝗲𝘆𝗼𝗻𝗱

MICON

12/10/2026

11/10/2026

10/10/2026

08/10/2026

07/10/2026

05/10/2026

04/10/2026

04/10/2026

03/10/2026

03/10/2026

Address

Website

Alerts

Shortcuts

Share

Category

Listing takedown request