FRP Manufacturing 2010 Inc.

FRP Manufacturing 2010 Inc. FRP Manufacturing (2010) Inc manufactures fiberglass water and wastewater tanks for residential and

FRP Manufacturing (2010) Inc is a Saskatchewan owned and operated company. Our production plant is located in Asquith SK, 38km west of Saskatoon. As a manufacturer of fiberglass tanks, FRP Manufacturing (2010) Inc has been an active part of the Saskatchewan business community for over 15 years. We work closely with municipal and provincial health departments, as well as engineering firms, in order

to provide solid professional service for our customers. We manufacture above and below ground fiberglass tanks in sizes ranging from 250 imperial gallons to 34,000 imperial gallons. Our product line includes water and wastewater storage & transport Tanks, Above Ground and In-ground Holding Tanks, Residential / Industrial Septic Tanks, Pump and Siphon Chambers, that can be suited to any size of project. All of our tanks are CSA approved and our water tanks are approved by NSF/ANSI 61 for potable water.

Our BX20000-WaterπŸ’§and BX20000-Sewage🚽tanks are finished with 4” of spray foam insulation, and have shipped to the Tsuut’...
01/16/2026

Our BX20000-WaterπŸ’§and BX20000-Sewage🚽tanks are finished with 4” of spray foam insulation, and have shipped to the Tsuut’ina Nation Recovery Facility in Alberta this week!

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

fiberglasswatertanks fiberglasstanks wastewaterindustry frpmocoat FRP Mocoat

πŸŽ„ Holiday Notice πŸŽ„If you have an urgent matter, please contact our Calgary office at 403-236-7738 or email quotes@frpmoc...
12/19/2025

πŸŽ„ Holiday Notice πŸŽ„
If you have an urgent matter, please contact our Calgary office at 403-236-7738 or email [email protected].
Wishing everyone a safe and happy holiday!

Through the cold and snow, this B8000-Sewage unit is making its way to an Anderson’s Pumphouse customer near Prince Albe...
12/05/2025

Through the cold and snow, this B8000-Sewage unit is making its way to an Anderson’s Pumphouse customer near Prince Albert, SK! β„οΈπŸš›

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

Today, we pause to remember and honour all those who have served and sacrificed for our freedom.We also extend our deepe...
11/11/2025

Today, we pause to remember and honour all those who have served and sacrificed for our freedom.
We also extend our deepest gratitude to the brave individuals who continue to serve and protect us today.

Lest we forget.

Heads up! πŸ‘‹ FRP/Mocoat will be closed Monday, November 10th, and open regular hours (8–5) Tuesday, November 11th.       ...
11/07/2025

Heads up! πŸ‘‹ FRP/Mocoat will be closed Monday, November 10th, and open regular hours (8–5) Tuesday, November 11th.

β€œIt’s alive!” ⚑️ Even our tanks are getting into the Halloween spirit. Meet our Frankenstein Ball Tank, built to last an...
10/31/2025

β€œIt’s alive!” ⚑️ Even our tanks are getting into the Halloween spirit.

Meet our Frankenstein Ball Tank, built to last and ready to spook! πŸ‘»

Wishing everyone a safe and happy Halloween from FRP/Mocoat!πŸ’š

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

A behind the scenes look at our dual-wall tank production process!πŸ› οΈ Tank 17T is 90% complete - bonding gussets to the n...
10/27/2025

A behind the scenes look at our dual-wall tank production process!

πŸ› οΈ Tank 17T is 90% complete - bonding gussets to the nozzles is all that’s left before it’s stood upright and sent to QA.

βš™οΈ Tank 4T is in progress - bottom end attached but not yet bonded, and the top section next to be installed. It’s now 80% complete and has been grinded/sanded in preparation for the UV protection layer. The vertical rib (horizontal in the photo) will house the interstitial sensor that detects leaks or moisture intrusion.

πŸ” The final photo shows the interstitial space between the dual walls. We use a 3D fabric that expands when resin is applied, forming a network that channels any liquid to the lowest point where the sensor is located. The inner wall is thicker (and sometimes made with a different resin) as it’s in direct contact with the stored liquid.

Both tanks are sodium hydroxide sump tanks and are designed to be partially buried installations.

Quality, precision, and safety in every build.

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

FRP/Mocoat wishes everyone a Happy Thanksgiving! We’re thankful for our amazing team, customers, and partners who help u...
10/13/2025

FRP/Mocoat wishes everyone a Happy Thanksgiving!

We’re thankful for our amazing team, customers, and partners who help us build strong connections all year long. We hope you had a safe and restful long weekend! πŸ¦ƒ 🍁

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

Please note that we will be closed on Monday, October 13th for Thanksgiving.We’ll reopen with our regular hours (8:30 AM...
10/10/2025

Please note that we will be closed on Monday, October 13th for Thanksgiving.
We’ll reopen with our regular hours (8:30 AM – 5:00 PM) on Tuesday, October 14th.

Wishing everyone a wonderful Thanksgiving and a relaxing long weekend! 🀎🍁

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

Thanks to our friends over at  for transporting our B5000-Sewage and B4000-Sewage tanks to Robson, British Columbia! Cou...
10/06/2025

Thanks to our friends over at for transporting our B5000-Sewage and B4000-Sewage tanks to Robson, British Columbia! Couldn’t have done it without you! 🚚 πŸ™Œ

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

We shipped this beast of a coagulant tank to Suncor Energy in Fort McMurray, SK last week! πŸššπŸ’¨ This custom FRP/Mocoat cyl...
09/08/2025

We shipped this beast of a coagulant tank to Suncor Energy in Fort McMurray, SK last week! πŸššπŸ’¨

This custom FRP/Mocoat cylindrical tank measures a whopping 14’ x 57’ 5”!

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

FRP/Mocoat will be closed on Monday, September 1st, and open our regular hours of 8:30 AM to 5 PM on Tuesday, September ...
08/29/2025

FRP/Mocoat will be closed on Monday, September 1st, and open our regular hours of 8:30 AM to 5 PM on Tuesday, September 2nd.

Have a fantastic long weekend, everyone!β˜€οΈ

πŸ“ž: 306-329-4884
πŸ“ž: 866-722-6246 Toll-Free
πŸ“§: [email protected]
🌐: https://www.frpmfg.com/

Address

PO Box 220, Highway 14 West
Asquith, SK
S0K0J0

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

1-866-722-6246

Website

http://www.radcustomfibreglass.ca/

Alerts

Be the first to know and let us send you an email when FRP Manufacturing 2010 Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to FRP Manufacturing 2010 Inc.:

Share