https://www.facebook.com/1267939383222136/

Hard To Kill Welding and Wood

Name: Hard To Kill Welding and Wood
Address: Barrhead, AB, T7N1N4, CA
Telephone: +17802949696

Home
Canada
Barrhead, AB
Hard To Kill Welding and Wood

Call Directions

Dallas' creations in both metal and wood.

11/14/2026

This post is a post about why it’s so hard to grow a business on Facebook. This was a screenshot from a follower. They literally hijacked my ad for a product we make. If you were to be able to scroll through the ads cutting off the bottom of the shared post you would be able to click on 3 different Etsy ads for a similar product. This is not only not cool but it’s also highly unethical. Do better Facebook

11/13/2026

Patrol upfit — Toyota Tacoma Trailhunter 🚔

Feniex lighting front to back, plus an Apex Designs air hose reel on a mount bracket we designed in-house. The first bracket flexed, so we built V2 — bigger, angular, way stiffer.

Fleet or patrol unit need outfitting? Send us a message.

— Hard To Kill Welding ()

11/12/2026

That hook is a horse bit 🐴

These coat and hat hangers are made from real used tack — Tom Thumb bits and horseshoes on a stained board. That coat is a 20 lb winter coat, and it gets yanked on daily. The hooks do not care.

I am building a first small batch of 10 — 3-hook board, $129. Once they are gone, they are gone until the next tack run.

Want one? Send us a message to claim yours.

What would hang on yours — coats, hats, or tack?

— Hard To Kill Welding ()

11/11/2026

Built a forge because it seemed like a fun idea 🔥

No customer, no order, no plan — just a pipe, a stand, and an idea that got out of hand. First test fire in the yard.

Now it needs a first project. What should I forge first?

— Hard To Kill Welding ()

11/09/2026

From beat-up aluminum to stainless 🔥

The original aluminum air control box on this bale trailer was dented, corroded, and full of straw — so we built a replacement in 14 gauge stainless steel.

Sealed, brushed finish, TIG welded details, and the air controls mounted clean inside. Built to keep the weather out and last through Alberta winters.

Stainless or aluminum for a box like this — what would you run?

Need a custom stainless box or trailer work done right? Send us a message.

— Hard To Kill Welding ()

11/07/2026

Kioti grill guard — Final part 🎉🚜

She's done. The guard is hinged and pinned — pull the spring pins and the whole guard folds forward, giving full clearance to open the bonnet for servicing. No more fighting with the guard or pulling it off to work on the tractor.

That wraps up the series: fit-up → cardboard template → hinge plates → finished. Thanks for following along!

Got equipment that needs a custom fix like this? Send us a message.

— Hard To Kill Welding ()

11/05/2026

New tool review 🛠️

Picked up this HighFire 20-piece carbide hole saw set for the shop — 13 sizes from 1/2" up to 2-1/8", plus hex keys, drill bits and springs, all in the case.

Sound on for this one — first look and first impressions in the video. Anyone else running carbide hole saws in their shop? How are they holding up?

Next we'll put them to work and see how they cut.

— Hard To Kill Welding ()

11/05/2026

Kioti grill guard — Part 3 🔧🚜

From cardboard to steel. The hinge plates are cut, drilled and clamped up in the corner of the guard, ready to weld.

This guard is getting hinges so it folds forward — giving clearance to open the bonnet when it's time to service the tractor. Weld-up is next.

— Hard To Kill Welding ()

11/04/2026

Kioti grill guard — Part 2 🔧🚜

Every good fab job starts as cardboard. Template made, test-fit on the tractor, then transferred to steel and laid out ready to cut.

This guard is getting hinges so it folds forward — giving clearance to open the bonnet when it's time to service the tractor. Follow along, more to come.

— Hard To Kill Welding ()

11/04/2026

Smart fix on this Kioti 🔧🚜

We're making the front grill guard hinge forward, so there's proper clearance to open the bonnet when it's time to service the tractor. No fighting with the guard and no pulling it off — just fold it forward and get to work.

Here's the fit-up, checking clearances all the way around the front end.

Need a practical fix like this on your equipment? Send us a message and let's talk.

— Hard To Kill Welding ()

Address

Barrhead, AB
T7N1N4

Telephone

+17802949696

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Hard To Kill Welding and Wood posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.