Hawker Typhoon JP843 - The Typhoon Legacy Society

Hawker Typhoon JP843 - The Typhoon Legacy Society The Typhoon Legacy Society is a not-for-profit society run by experienced volunteers, and dedicated to the airworthy rebuild of Hawker Typhoon JP843.

Please follow along and support us if you can! The Typhoon Legacy Society and the rebuild of Hawker Typhoon JP843 has had two beginnings, one with Ian Slater in British Columbia Canada that started more than 20 years ago, and another that started with Roger Marley in the UK during the early 1990's. The Canadian dream of seeing an airworthy Typhoon started with the fascination of the aircraft's his

tory and unique design. Understanding that the undertaking would be incredibly demanding, requiring drawings, skilled trades and an approved organisation as a backbone for the project even before work could begin, Ian trained for more than two decades as an Aircraft Maintenance Engineer specializing in sheet metal fabrication. The search for drawings was difficult, but bared fruit in 2009 with the discovery of volumes of "big Hawker" technical drawings. Roger Marley's project was being built the entire time, and came at just the right time to showcase the project to the dwindling numbers of Typhoon pilots and ground crew. Rogers project included mock-up components along with an amazing list of original Typhoon parts, some of which may be impossible to locate elsewhere. Early in 2015 the deal was made, and Typhoon JP843 came to Canada to join with the work Ian had done throughout his career. The project has a facility and equipment to help push through the next phases.................Stay tuned!

We've recently had the guys from our sponsor E3d at the shop to do some scanning on fragile magnesium accessory drive ca...
07/03/2026

We've recently had the guys from our sponsor E3d at the shop to do some scanning on fragile magnesium accessory drive cases from the Sabre IIA. And while they were on site, they were kind enough to scan two of the sleeves from our engine as well.

The Sabre has two different sleeves, 12 of each. These are essentially opposites, with the only difference being the port to trunnion orientation; top right and bottom left are the same, and top left and bottom right are the same.

At this time, we've not had any luck in locating the original engineering drawings for Sabre sleeves. Using the information gathered from this process will be able to combine known dimensional information with the scanned port profiles and orientation to create new data for potential future production.

Our most recent video is now up on YouTube! Remember, these are all published early on our subscriber channel ( https://...
06/06/2026

Our most recent video is now up on YouTube! Remember, these are all published early on our subscriber channel ( https://typhoonlegacy.vhx.tv/ ), and for paid YouTube subscribers silver level and above!
https://youtu.be/SprxZFST_VM

In this video I address my views on a comment made several years ag...

Thank you very much airscale and all of your clients for this amazing donation!
06/06/2026

Thank you very much airscale and all of your clients for this amazing donation!

June 6th... what an appropriate day to make another donation to Hawker Typhoon JP843 - The Typhoon Legacy Society

With thanks to all my Typhoon customers helping get JP843 back in the air :)

06/03/2026

We are looking for volunteers local to the Comox Valley / Campbell River area (or those who are willing to commute). Positions include:
General shop work
Welding and fabrication (tooling fixtures etc.)
CNC operator (HAAS dual spindle turning center)
Social media and website development
AME M1/M2 with piston engine experience
Experienced mechanics considered
Bookkeeping and records

We are looking for experienced individuals who have a passion for aviation, and would like to support the rebuild of Typhoon JP843. Availability of 1-2 days per week is ideal, but accommodations can be made for the right fit.

As we advance into charitable status we are looking to significantly increase production; we need you!

Please send us a message here if you are interested and we will make contact you.

We're up to something, but I can't tell you what it is yet! I made a trip out to Alberta recently, and met with Karl fro...
05/26/2026

We're up to something, but I can't tell you what it is yet!

I made a trip out to Alberta recently, and met with Karl from the Bomber Command Museum of Canada. We had an unfortunate breakdown south of the museum, but Karl stayed (very) late to ensure we got back on the road. The situation provided some extra time to see what they've been up to with the Hercules engines for the Halifax 57 project! Thank you very much Karl! https://www.facebook.com/groups/112232095483062/

We've released a short detail video covering the amazing 1/8 scale Sabre VII for your viewing pleasure. This is the firs...
04/14/2026

We've released a short detail video covering the amazing 1/8 scale Sabre VII for your viewing pleasure. This is the first of only 3 that will be built! https://youtu.be/TFf7dSp_WU0

James Donald inches flew Hawker Typhoon JP843 on the 6th, 7th and twice on the 8th of July 1944. Like so many, James wa...
04/06/2026

James Donald inches flew Hawker Typhoon JP843 on the 6th, 7th and twice on the 8th of July 1944. Like so many, James was an RCAF pilot within 609 Sqn RAF, he is also the pilot who's detailed logbook notes helped us identify the correct markings for JP843, those being PR-K.
We are very fortunate to have the support of his family, and honored when we have a chance to show them our work in the shop. This past Friday I had the privilege to do just that, two of James' daughters Margot Inches (left) and Katherine Inches Grant, along with James' granddaughter Caroline Grant joined me in the shop to see what we've been working on.
These wonderful ladies can be seen here, holding a copy of the great print "Inches from Disaster", a print painted by Julien Lepelletier commissioned by the 609 Squadron Association in Belgium, and presented to them by the Typhoon Legacy Society. The print depicts a mission that James flew where he got a little bit too low!

Thank you very much for visiting with us!

With the great interest from the last post, I thought you may like to see an image of the engine from a different angle!...
04/01/2026

With the great interest from the last post, I thought you may like to see an image of the engine from a different angle!

My apologies for the previous cheeky April 1st post! ~Ian

A perfect way to celebrate Rob Roy's birthday is with this amazing new addition to the project! Happy Birthday Rob!!
04/01/2026

A perfect way to celebrate Rob Roy's birthday is with this amazing new addition to the project! Happy Birthday Rob!!

As many of you know, to this point, JP843 has been under construction by Typhoon Legacy Co. Ltd. We have now incorporate...
03/28/2026

As many of you know, to this point, JP843 has been under construction by Typhoon Legacy Co. Ltd.

We have now incorporated the Typhoon Legacy Society as a registered not-for-profit in Canada. This is the primary step in becoming a registered charity in Canada; a move that will allow the Society to provide tax receipts to individuals and corporations who wish to support the project.

Onwards and Upwards!

Address

Comox, BC

Telephone

+12507027142

Website

Alerts

Be the first to know and let us send you an email when Hawker Typhoon JP843 - The Typhoon Legacy Society posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share