Vanco Electrical Solutions

Vanco Electrical Solutions Your trusted Electrical Distributor in Ontario, specializing in Harmonic mitigation, Power Factor Correction, and cutting-edge solutions.

Empowering OEMs, Contractors, and Drive Integrators.

06/03/2026

Most industrial surges don’t come from lightning, they come from your own equipment cycling on and off every day.

These routine power disturbances quietly degrade your sensitive electronics over time, shortening equipment lifespan and causing unexpected downtime.

The fix? A tiered defense. Leviton M, B, and X-Series panels layer protection throughout your facility from the main service entrance down to your most critical production equipment.

🔗 Contact us to compare options or speak directly
(905) 305-7702
[email protected]

Transformer sizing. Motor amp draw. Reactor impedance. These are calculations that come up every week, and they should t...
06/01/2026

Transformer sizing. Motor amp draw. Reactor impedance. These are calculations that come up every week, and they should take seconds, not a trip to the catalog or a spreadsheet you built three years ago.

We put together 5 free electrical calculators on our website. No sign-up or paywall. Swipe through to see what each one does, and bookmark the page for the next time you need it.

👉 vancoelectrical.com/tools

Every motor. Every machine. Every time someone needs to work on it, the power should be verifiably off, locked out, and...
05/29/2026

Every motor. Every machine. Every time someone needs to work on it, the power should be verifiably off, locked out, and tagged.

That's what a safety disconnect switch is for. And Leviton's Powerswitch® line is built specifically for the environments where this matters most: anywhere washdown is routine and the stakes of a misstep are high.

Got a facility that needs a closer look at its disconnect setup? Let's talk.

Hard-wired panels are sequential by nature. One wire, one connection, one tech, one direction. Testing happens at the en...
05/28/2026

Hard-wired panels are sequential by nature. One wire, one connection, one tech, one direction. Testing happens at the end. Faults show up at commissioning. Field swaps mean rewiring in a live enclosure.

There's a way to build where the panel isn't the bottleneck. Swipe to see what the shift looks like, and what it means for you.

The panel is built. Commissioning day arrives. And that's when the miswire shows up.It doesn't have to work that way.WAG...
05/25/2026

The panel is built. Commissioning day arrives. And that's when the miswire shows up.

It doesn't have to work that way.

WAGO's pluggable rail-mount terminal blocks let you wire off the panel, test before installation, and swap components in the field without touching a single other connection. Swipe through to see how that plays out for machine builders, maintenance teams, and panel shops in the real world.

Hard-wired panels take time to build and even more time to troubleshoot when something's wrong.WAGO's pluggable rail-mou...
05/22/2026

Hard-wired panels take time to build and even more time to troubleshoot when something's wrong.

WAGO's pluggable rail-mount terminal blocks let you wire the connector, not the panel. Pre-assemble on the bench, test before installation, and swap components in the field in minutes.

Swipe through to see how the X-COM® system takes the pain out of panel work.

Two MTE products. Two very different specializations. Knowing which one fits your application makes all the difference i...
05/20/2026

Two MTE products. Two very different specializations. Knowing which one fits your application makes all the difference in how your system performs.

Swipe through to see what the Matrix AP Harmonic Filter and RL Reactor each do best, and when to reach for one over the other.

Happy Victoria Day from all of us at Vanco.Please take note that we are closed today, and will be back on Tuesday, May 1...
05/18/2026

Happy Victoria Day from all of us at Vanco.

Please take note that we are closed today, and will be back on Tuesday, May 19, 2026.

We wish you a safe and relaxing long weekend with family, friends, and a little time to recharge.

THD (Total Harmonic Distortion) is one of those numbers that doesn't get enough attention until something in your system...
05/15/2026

THD (Total Harmonic Distortion) is one of those numbers that doesn't get enough attention until something in your system fails.

It's not just a compliance metric. It's the difference between a transformer that lasts 20 years and one that runs hot and dies early. Between a drive that trips for no apparent reason and one that runs clean.

Swipe through to understand what THD actually measures, why THID and THVD are two different conversations, and what high distortion is quietly doing to your equipment right now.

Your VFD can be running and the power can still be dirty.THD is a measurement of harmonic distortion, and nonlinear load...
05/13/2026

Your VFD can be running and the power can still be dirty.

THD is a measurement of harmonic distortion, and nonlinear loads are what create the problem in the first place. MTE’s guidance separates THD from TDD so the issue can be understood properly before choosing a correction path.

Do not assume clean power just because the equipment is on. Measure it, understand it, then correct it.

Address

Markham, ON
L3R8E5

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+19053057702

Website

Alerts

Be the first to know and let us send you an email when Vanco Electrical Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category