King slab toronto

King slab toronto Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from King slab toronto, Construction Company, Richmond Hill, ON.

06/13/2026

Good tile work starts long before the first tile is installed.

In less than a minute, I’m showing one of the most important parts of any installation: proper preparation.

Before the uncoupling membrane goes down, we prime the plywood substrate. It’s a simple step, but one that helps improve adhesion, lock down surface dust, and create a better bonding surface for the mortar.

Most failures don’t happen because of what you see. They happen because of what was skipped underneath.

When you’re installing 48” x 48” porcelain, every layer matters. The foundation of a successful installation is built during the prep work, not on installation day.

Anyone can admire the finished product. Craftsmanship is found in the steps most people never see.

#👑

06/13/2026

Finally had the opportunity to see this primary ensuite fully completed. There’s something special about seeing every detail come together and the original vision brought to life. ✨🙏

Thank you Lynn and Douglas 🙏

Lynn Cadwell (formerly Lynn Thomas)

#👑

06/12/2026

It’s cottage time ☀️🇨🇦
Everybody is getting ready for the season.


Beautiful textured porcelain slabs from
LAMINAM North America
All prep work material from Alexandra Nikolakakos she delivered here 👏👏👏🙏🙏🙏💪💪💪
Everything ARDEX Canada as per usual: boards, screws, washers (very good ones BTW), mortar, waterproofing membrane, uncoupling membrane… anyways… they have everything (not sponsored).

06/11/2026

Got a lot of new followers 🙏 thank you so much. I really appreciated you 🙏✌️❤️

Though about reintroducing myself ✅

#👑

06/11/2026

Pure epoxy.
Most people see the finished result.

Very few understand what it takes to replace traditional grout with pure epoxy.

This isn’t epoxy grout. This is the same epoxy system we use on our mitered edges, custom color-matched and installed by hand to create an seamless transition between tile and joint.

The process starts long before the epoxy is mixed. Starts removing the bevel of the tile then Every grout line must be cleaned and free of any dust or mortar residue… contamination and how deep u go, can compromise adhesion. Then every edge is carefully taped to protect the tile surface. Mixing is another challenge—resin, hardener, and pigments must be measured precisely every single time. Even small inconsistencies can affect the final color and finish.

And unlike traditional grout colors that come ready-made, pure epoxy requires custom color matching. You need to understand the material and know how to build the color from scratch to make the joints visually disappear.

The reward?

✔ Non-porous and highly stain resistant
✔ Waterproof surface
✔ No sealer required
✔ Exceptional durability
✔ Seamless appearance when color-matched correctly
✔ The same finish and texture as the epoxy used on the miters

It’s a much slower process, but craftsmanship is often found in the details most people never notice.

Done right, the grout lines disappear, leaving the stone or porcelain to speak for itself. ✌️🙏🇨🇦

#👑

06/07/2026

A window sill inside a shower is one of those details that has to be done right.

Before a single tile goes in, everything is fully waterproofed using Ardex 8+9. From there, every mitered corner is epoxy reinforced. During installation, we intentionally leave space behind the miters to allow the epoxy to fully lock everything together from the inside out.

What you see here might look simple, but it’s one of the more demanding parts of the process. Epoxy has a limited working time, so every step must be planned and executed with precision. Once the hardener is mixed, there is no room for hesitation.

The difference between a good result and a failed installation often comes down to process, timing, and attention to detail.

Built to look seamless. Built to last.

Epoxy brand used: Superior.
Boards and waterproofing system: Ardex
Special thx to

#👑

06/06/2026

Finishing up the niche shelf today.

Fabricated from the same 48” x 48” porcelain tile used on the floors and walls, keeping everything seamless. The natural stone feature in the back of the niche adds beautiful movement, and once the LED lighting is installed, it’s going to make that stone glow ❤️.

Every miter is epoxy reinforced, and all finishes throughout this primary ensuite are epoxy-based. 🙏

#👑

06/05/2026

Not my first rodeo ✌️

06/05/2026

We care about details baby 😃✅
Things that people usually don’t care about it, we do 🙏😃✅✌️

#👑

06/05/2026

Large-format 5’ x 10’ porcelain slabs create a seamless foyer, while the contrasting border adds depth, definition, and visual interest, enhancing the overall design of the space.
U barely see the transition between slabs , thanks to our process, Grout delete. 100% pure epoxy between the slabs 🙏.

#👑

Address

Richmond Hill, ON
L4B, L4C, L4E, L4S

Website

Alerts

Be the first to know and let us send you an email when King slab toronto posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category