Kruger Construction

10/17/2026

Did you know Makita has an Auto Start Wirless System in some of their cordless tools?
•
The tools with AWS can take a Bluetooth chip and the vacuum as well
•
Simply pair them pushing the buttons and then when the tools starts so does the vacuum
•
This is the ultimate setup for a miter saw and vacuum
•
It’s doesn’t matter if it’s an 18v or 40v tool or vacuum, they all work together
Makita Tools USA
Makita Canada Inc.

10/16/2026

10/14/2026

Someone had asked if the EGO paddle broom would move pinecones in their grass
•
Yes it will, we tried it on big and small ones.
It even swept up a bunch of the pine needles as well
•
This is part of their multi-head attachment lineup.

10/13/2026

Did you know Makita has a 40v 10-1/4” saw that has a track compatible base
•
It also one of the few saws out there that has a button to move the guard to line up your cut easy
•
This is a good one if you are looking to get a track saw or more depth. Sorta 2 birds with 1 stone kinda thing

Makita Tools USA
Makita Canada Inc.

10/11/2026

Time to add this 3” ReadyLIFT Suspension Inc. and Falcon Shocks kit to the Tacoma Build
•
This lit swaps out the shocks, coils and bump stops as well as extends some lines and sway bar with brackets.
•
This Makita Angle impact wrench is awesome for getting into tight spots that need some higher torque
•
Check out that full impact socket drawer in the MegaMod GEARWRENCH cabinet
•
With this 3” lift and a bit of trimming I’ll be taking off the 35’s and switching to 37’s
•
This suspension kit is available Tacoma Lifestyle
•
Tomorrow we will be installing the front

Makita Tools USA Makita Canada Inc.

10/10/2026

I was told Inoteca InstantBond could be used as a wall anchor in concrete
•
I thought I’d do my own little test
•
I drilled a hole bigger than the screw hook
•
Then sprayed the accelerator, added some adhesive and sprayed the accelerator again.
•
I spun the screw hook in and gave this 37 lb block a good lift.
Honestly this stuff has amazed me so many times.

10/09/2026

I’ve never regretted having a lot of plug-ins.
Especially in a garage/shop.
•
So before we insulate and close these walls up I’m adding a few more
•
I saw an electrician do this with a laser and I’ve done it like this since. The line appears in the vanity for the perfect hole placement.
•
The Spyder Products Stinger flies through the studs extra fast with that New Makita 40v drill on the 3rd speed! And it still has a ton of torque going that fast
Makita Tools USA
Makita Canada Inc.

10/08/2026

This tire is well past due so I swapped it out for a flat free
•
Used the Dewalt Construction Jack to take the with Tod the gate off the tire for the swap
•
Completely effortless for the Hight Torque 1/2” Impact wrench
•
Now the gate rolls with ease and is ready to roll through that white fluffy stuff when it hits the ground, hopefully that’s still far away.
DEWALT POWER TOOLS
DEWALT CANADA🇨🇦

10/07/2026

Giving the New EGO 18” Chainsaw a go
•
It’s nice not having to mess around with a finicky carb and hauling around a gas can. •
Just make sure the battery is charged, chain is sharp and is oiled
•
We chopped up this whole tree using a 6ah battery and it was still over half full
•
I ran the chainsaw on the fasted speed but it also has an eco mode which slows it down to conserve battery runtime
•
It also has lights on it and the brake is quick to come on when you let off the trigger.

10/06/2026

Well being in my early 40’s I grunt getting out of low cars and I guess I now grunt swinging an Axe too
•
But this isn’t just any axe, this is the Crescent Tools 8lbs Splitting Maul
•
The head alone weighs 8lbs, that’s the weight of a Gallon of milk (4 liters)
Or for you gamers an Xbox One or PS5
•
We cut this Maple down 10 minutes before we started chopping it and you could see the moisture running out of it.
•
The HEADLOCK system provides multiple points of contact with the head that prevents it from separating from the handle
•
It has steel overstrike protection that defends against damage from mish*ts. Which do happen.
•
The Vibration Control Handle design really stood out as well. I split a whole tree not stop and my hands and shoulders aren’t aching though I’m still gonna soak in the hot tub tonight to be safe