MG Chemicals Ltd.

Name: MG Chemicals Ltd.
Address: 9347 193 Street, Surrey, BC, V4N4E7, CA
Telephone: 1-604-888-3084

Home
Canada
Surrey, BC
MG Chemicals Ltd.

M.G. Chemicals is a manufacturer and wholesaler of chemical products for the electronics industry.

06/21/2018

The Université Laval FomUL team used MG Chemicals PLA 3d Printing filaments, 834 - Acetone, 4910 Tip Tinner, 4880 RA Solder Wire, 422B Conformal Coating and 832B Black Epoxy Potting Compound to fabricate their Formula SAE car brake lamp

06/14/2018

The 403A Super ColdTM 134 is a pure, non-flammable duster that is used primarily for diagnosing thermally intermittent problems with electronic devices, and for protecting heat sensitive components during soldering, quickly cooling solder joints. It can also be used to quickly remove gum and other adhesives from a variety of surfaces.
https://www.facebook.com/pg/MgChemicals/posts/?ref=page_internal

06/07/2018

The 8310A Conformal Coating Stripper - Gel removes most reworkable thermoplastic (non-cross linked) acrylics, urethanes, and silicones based conformal coatings. It also facilitates the removal of some thermoset coatings like cross-linked silicones and polyurethanes by softening or swelling the coat to aid with mechanical removal.

This stripper is safe for most types of PCB components. It is fully biodegradable and environmentally safe.
https://www.mgchemicals.com/products/thinners-strippers/8310a-conformal-coating-stripper-gel

05/31/2018

Easily draw and repair conductive traces with MG Chemicals’ conductive pens. They dispense acrylic lacquer pigmented with either carbon powder, nickel flake, or silver flake. Each pigment provides a different volume resistivity, making each pen suitable for different applications. https://www.mgchemicals.com/…/prototyping-…/conductive-pens/

05/24/2018

The 8462 Silicone Grease is a translucent, water repelling (hydrophobic), non-melting, and lubricating dielectric grease that provides superior corrosion and arcing resistance for connectors. It performs well in extreme cold, heat, humidity, and other extreme conditions like high voltages. Further, because it repels water, it provides excellent oxidation resistance for contacts and relays. https://www.mgchemicals.com/products/greases-and-lubricants/dielectric-grease/silicone-8462

05/17/2018

Don't throw away your rubber accessories! Restore and rejuvenate them with 408A / 408B Rubber Renue and give these worn-out rubber parts a new life!
• Rubber seals
• Rubber gaskets
• Belts
• Platens
• Rollers
• Weather strips
• Audio device wheels
• Windsheild wiper blades

https://www.mgchemicals.com/products/cleaning-products-for-electronics/cleaners/specialty-cleaners/rubber-renue-408a-408b

05/11/2018

Our 434-Acetone can be used to remove layers on the prints' surface ct PLA 3D printed pieces. Simply rub the surface with a cloth damped with Acetone and obtain a much smoother finish. https://www.mgchemicals.com/products/3d-printing-supplies/3d-printing-chemicals/acetone-434

05/03/2018

Université Laval’s FormUL uses MG Chemicals PLA 3D printing filaments to create some of the parts of their Formula SAE car. In the attached images they created the vehicle’s brake lamp enclosure with our PLA17BK1 Black PLA Filament. MG Chemicals is proud to contribute in the development of the future generation of Electrical and Mechanical engineers and be a part of the FormUL past and upcoming successes. https://www.mgchemicals.com/products/3d-printing-supplies/3d-printer-filaments/ https://www.facebook.com/formulesae/

04/24/2018

Keep your soldering iron oxide-free and in good working condition with MG Chemicals 4910 - Tip Tinner. https://www.mgchemicals.com/products/solder-and-accessories/tip-tinner/tip-tinner-4910

04/18/2018

MG Chemicals Ferric Chloride is perfect for etching copper, brass, bronze, damascus steel and stainless steel, PCB fabrication, jewelry making, decorating art knives and other metalwork, etching pattern welds, etching on stone surfaces and can be used as a colorant in pit-firing some pottery. https://www.mgchemicals.com/products/prototyping-and-circuit-repair/prototyping/ferric-chloride-415

04/10/2018

Create professional looking 3D printing pieces with a real wood look and feel. Our Wood 3D printer filaments are made with a blend of polylactic acid (PLA) and wood particles. They can be sanded and painted while emanating a sweet odour of wood. It is offered in natural and dark colour. https://www.mgchemicals.com/products/3d-printing-supplies/3d-printer-filaments/wood

Address

9347 193 Street
Surrey, BC
V4N4E7

Telephone

1-604-888-3084

Website

http://www.mgchemicals.com/

Alerts

Be the first to know and let us send you an email when MG Chemicals Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Engineering Company in Surrey?