Elite Chiropractic Tables

Call Directions Website

Elite Chiropractic Tables Handcrafted chiropractic tables made with decades of experience, quality materials, and proven technology. Built to meet the way you practice.

Elite is the proud manufacturer and distributor of Elite Chiropractic tables. Elite was Estabilished in 1974 and over the past 37 years Elite has earned and maintained a reputation as the "Workhorse of the Industry". Elite is a family based company which prides itself on building strong, quality, adjusting tables while maintaining the highest standard of customer service in an industry that is breaking boundaries in the world today.

10/15/2026

A clean hip adjustment comes down to control. working through it here on an Elite flexion-distraction table, steady and controlled so every setup feels the same, patient after patient.

🎬:

10/14/2026

This is where it all comes together.

Every Elite table is built right here, start to finish. We weld the steel frames, powder-coat them by hand, and stitch the cushions on-site, and no drop goes out until it's been tested. Do that for 50 years, and it shows. It's why Elite tables are still known for their design, quality, and longevity.

We took our flexion tables from a 10-inch elevation range to 15.That’s more room to move, dropping lower so patients get...
10/09/2026

We took our flexion tables from a 10-inch elevation range to 15.

That’s more room to move, dropping lower so patients get on and off with ease, and lifting higher so you work at your height instead of hunched over it. Not many tables out there give you that kind of range. Easier on your patients, easier on your back, all day long.

Available on the Automatic and Manual Flexion tables.

10/06/2026

Six years of daily adjusting, and Dr. Rebecca's HiLo Flex is still going strong.

That's what Elite tables are made for. Handcrafted to the highest standards for chiropractors, and known for their design, quality, and longevity. She trained on one in school, chose one for her own practice, and calls it worth every penny.

📸: .rebeccahopkins

09/29/2026

Some of the hardest cases don't need more force. They need more control.
Dr. Nick Rozell is working through low back pain here, with disc and facet involvement, on the FLEX. The table carries the flexion so his hands don't have to fight for it, patient after patient.

📸: .spine.sport

Our favorite thing is seeing where these tables end up.Every Elite is a welded steel frame, made to order and shipped wo...
09/26/2026

Our favorite thing is seeing where these tables end up.

Every Elite is a welded steel frame, made to order and shipped worldwide. You choose the base color, the upholstery from five collections, and the options your room needs: pelvic drops, a breakaway chest section, and more, so it fits the way you adjust. If you work on one, tag us; we would like to feature you next.

Thank you to everyone who has made an Elite part of their practice.

The table follows the technique, not the other way around.For over 50 years, that’s been the whole point of an Elite tab...
09/24/2026

The table follows the technique, not the other way around.

For over 50 years, that’s been the whole point of an Elite table: design, quality, and longevity built around how you actually adjust. Drop technique runs on reliable drop sections, tensioned to your force: the Hi-Low Manual Flexion Table. Flexion-distraction needs a moving caudal section you control: the Automatic Flexion Table. Diversified calls for a stable, full-spine surface that holds its alignment: the Motion Series Table. One welded steel frame under each, made to order.

Tell us how you adjust, and we’ll point you to the model.

09/18/2026

This is why chiropractors run a Hi-Low Table.

The table stands upright so patients step on while standing, then brings them down gently for treatment. No climbing, no awkward transfers, better for anyone with pain or limited mobility, and easier on you, patient after patient. Set your working height and build it the way you practice.

Tables Featured: HiLo Auto-Flex, HiLo Flex, E5, E4

Where it all begins.Every Elite table is built to order, in-house, the way it’s been for over 50 years. Steel frames wel...
09/17/2026

Where it all begins.

Every Elite table is built to order, in-house, the way it’s been for over 50 years. Steel frames welded by hand, your pick of base color and upholstery from 100+ options, and sections set for how you adjust. One table, built to your spec, and built to work for years. The workhorse of the industry.

Your table should look like it belongs in your clinic.Every Elite table sits on a powder-coated base, and the color is y...
09/13/2026

Your table should look like it belongs in your clinic.

Every Elite table sits on a powder-coated base, and the color is yours to choose from eleven options. Black or White for a clean, clinical room. Silver Vein, Copper Vein, or Gun Metal when you want more depth in the finish. Fire Truck Red or Military Green if you'd rather it be the first thing a patient notices. The coat is the same on all eleven: exceptionally durable and zero maintenance, built to hold its finish through years of daily practice.

Color may vary depending on your screen.

Address

692 Nanticoke Creek Parkway
Toronto, ON
N0A1J0

Opening Hours

Monday 9am - 4pm
Tuesday 9am - 4pm
Wednesday 9am - 4pm
Thursday 9am - 4pm
Friday 9am - 4pm

Telephone

+18006894730

Website

Alerts

Be the first to know and let us send you an email when Elite Chiropractic Tables posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share