Imetric 4D

The world's highest ROI and #1 full-arch photogrammetry Guaranteed passivity. 24-hour support.

03/09/2026

As full arch procedures continue to grow, the cases are becoming more complex.

From pterygoid implants to zygomatic implants, clinicians are being asked to capture implant positions in areas that can be harder to access, farther back in the mouth, and more challenging for many systems to read predictably.

That is where ICam makes a difference.

ICam is designed to capture implant position with the precision, consistency, and reliability needed to support even more complex full arch workflows.

Complexity shouldn’t create uncertainty.

The full webinar premiere is live now on YouTube.
🎥 Watch now to learn more https://go.imetric.com/ICamInsights

01/09/2026

The need for full arch treatment is growing.

With millions facing tooth loss in at least one arch, more clinicians are looking for ways to bring full arch workflows into their practice with greater confidence.

For many teams, full arch can feel like a big step filled with uncertainty. ICam is designed to reduce uncertainty by supporting the precision, predictability, and reliability needed for successful restorative outcomes.

For clinicians, that means more confidence in the workflow.
For patients, it means a better experience.
For practices, it means a stronger path to growth.

🎥 Join us this Thursday, September 3rd for the full webinar premiere on YouTube.
🔗 https://go.imetric.com/ICamInsights

28/08/2026

Calibration takes just a few seconds, but it helps eliminate variables like temperature changes, minor shocks, and environmental conditions.

This allows the software to verify the precision of the ICam before every scan.

A few seconds of calibration help protect every measurement that follows.

27/08/2026

Built for full arch. Designed for precision.

ICam wasn’t adapted from another workflow. It was purpose-built for full arch from the start, with precision and predictable clinical outcomes at the center of its design.

When the goal is a passive-fitting prosthesis, the technology behind the workflow matters.

Hear more about what sets ICam True Photogrammetry apart and why purpose-built technology makes a difference.

🔗Join us next Thursday, September 3, for the premiere on YouTube! https://go.imetric.com/ICamInsights

21/08/2026

FitMeter was built to make precision measurable for the entire full arch community.

Any device. Any system. Repeatability made measurable.

Whether you are evaluating your current workflow or comparing consistency over scans, FitMeter gives you a free way to test the precision behind your process.

By testing a device against itself using Six Sigma methodology, FitMeter helps show how consistent your system is from one scan to the next.

Because precision is not limited to one device.

It should be measured across every workflow.

🔗 Test your device today at the link in our bio.

20/08/2026

FitMeter was built for the full arch community.

Any device. Any workflow. One clear way to measure precision.

With FitMeter, clinicians, labs, and teams can test their system against itself and receive a precision report instantly. It is our way of giving back to a community that continues to push full arch dentistry forward.

Because everyone deserves access to clear data about their own equipment.

📊 Precision should not be assumed. It should be measured.

🔗 https://go.imetric.com/fitmeter
Check your precision today!

18/08/2026

Precision is not built on one check.

It is supported throughout the workflow.

With ICam, calibration and verification are built into the process. From the calibration plate to individually calibrated ICamBodies, the system is designed to compare each measurement against known calibration data.

That means every scan is supported by checks that help confirm the data being captured is consistent, precise, and ready to move the case forward with confidence.

With ICam, precision is always verified.

🔗 Watch the full webinar now on YouTube. https://go.imetric.com/ChattingWithHorst

17/08/2026

Did you know?

There’s no estimations about implant positions with photogrammetry.

Photogrammetry measures them directly. This is making it a trusted technology for full-arch implant workflows where precision matters most.

13/08/2026

Simply put: The input device matters.

When labs compare cases made with ICam to other systems, the difference comes back to precision at the point of capture. The manufacturing process may be the same, but the data going into that process is not.

ICam is built to give teams the most precise implant position data they need from the start. Passive fit starts with precision measurement. That is the value of the only true photogrammetry.

🔗Watch the full interview premiering now!
https://go.imetric.com/ChattingWithHorst

12/08/2026

“Take my word for it” should not be the standard in full arch dentistry.

In our full video discussion, we explore a more data-driven approach to full arch measurement.

From True Photogrammetry, operator independence, the true cost of remakes, and the importance of verifying every step of the workflow, this conversation challenges the idea that precision should simply be trusted.

🎯 It should be tested.
🎯 It should be questioned.
🎯 It should be measured.

Watch the full video, premiering this Thursday, to learn how Imetric is helping move full arch workflows from assumption to verification.

🔗 Get notified for the full release today!
https://go.imetric.com/ChattingWithHorst

Adresse

Le Bourg 9
Courgenay
2950

Webseite

https://www.imetric.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Imetric 4D erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.