26/06/2026
Getting Started for the Ara240 On the OK-MX9596-C Single Board Computer
In this video, we’ll walk through everything you need to connect the Ara240 module to the OK-MX9596-C Single Board Computer.
✔️ Before you begin, make sure the board is completely powered off. First, identify the M.2 connector and the fan connector on the Ara240 module.
✔️ Insert the Ara240 module into the M.2 M-Key interface on the board and ensure it is fully seated.
✔️ Secure the module using the mounting screw, then connect the fan cable to the fan connector.
✔️ Next, we’ll install the module onto the OK-MX9596-C.
✔️ Once installation is complete, power on the OK-MX9596-C following its Getting Started Guide.
✔️ After startup, verify that: The Ara240 cooling fan is spinning properly and The green status LED on the module is illuminated
If both indicators are active, your Ara240 module has been successfully connected and is ready for use.
🔗Ara240 AI Acceleration Card
https://www.forlinx.net/product/fai-ara240-m-edge-ai-accelerator-177.html
🔗FET-MX9596-C System on Module
https://www.forlinx.net/product/imx95-c-system-on-module-151.html