10/04/2026
Most pipe shredders give you one choice: run everything at full power, or don't run at all.
The Genox J Series Pipe Shredder doesn't work that way.
The industry-leading four-rotor design runs on independent gearboxes. Processing a thin-walled 200mm pipe? You don't need the same drive force as a 600mm thick-walled industrial pipe. Activate exactly what you need. The four working axes intelligently adjust to the actual shredding load—not the maximum possible load.
The result: your energy draw scales with the job, not the machine's ceiling.
Beyond power savings, the fully automatic hydraulic loading frame handles the heavy lifting. The feed rate is adjusted continuously via cylinders, keeping the rotors loaded at optimal torque without operator intervention. Furthermore, this intelligent design completely eliminates the need for manual pre-cutting, allowing 6-meter pipes to be fed directly. This drastically reduces your labor costs and eliminates operational bottlenecks.
Engineered specifically for large-diameter, thick-walled pipes in post-industrial and municipal recycling streams.
We are bringing the J Series to 2026, Shanghai — April 21–24.
If you are processing large plastic profiles and your energy cost per tonne is a problem, let's talk specifics at the show. DM us to book a meeting.
