27/09/2026
WC67K-125T3200 With E310P Controller NC Press Brake,Sheet Metal Bending Machine,Factory-direct sales
β Why Choose the ESTUN E310P?
10-inch color touchscreen: View and enter bending parameters through a practical touch interface.
Direct angle programming: Enter the target angle, material, sheet thickness, and tooling data. The controller calculates the required bending depth from these inputs.
Tool library and material table: Organize setup data and recall saved die parameters for subsequent jobs.
Single-bend and multi-step operation: Set up an individual bend or create a sequence with separate parameters for each step.
X/Y/R/C control capability: Supports backgauge positioning, ram-depth setting, backgauge height, and crowning functions according to the machine configuration.
Servo-axis communication: CAN bus connectivity supports communication between the controller and compatible servo drives.
USB functions: Support program and parameter backup, plus system updates.
Angle compensation: Refine the result after a measured test bend to bring the finished angle closer to the target.
Available axes and enabled functions depend on the selected press brake configuration. Ask KRRASS to confirm the control package for your application.
π What You Will Learn
π§° 1. Add and Recall a Die
Open Settings, then Die, select an empty row, and enter the die geometry, including height, V-opening width, angle, radius, and SafeZone. Save the entry and recall it by its die number. Reusing stored tooling data helps keep repeated setups organized.
βοΈ 2. Set Up Manual Bending
Use the Single page to select the material, enter the sheet thickness, choose the die, and set the bending angle and X-axis backgauge position. The demonstration uses a 90Β° target angle. It also covers pump startup, pedal-mode selection, and returning the ram to its upper dead point when βBeam not in UDPβ appears.
π 3. Create a Multi-Step Bending Program
Create and name a program, enter the first bend, and add further steps with their own parameters. Learn how to delete an unwanted step, set repetitions, and reload a saved program. Watch the CurrStep value during operation to identify the active bending step.
π 4. Adjust Bending Angle Compensation
Follow a practical test-and-measure example: the first bend measures 92Β° against a 90Β° target. In the demonstrated setup, the compensation value changes from 16 to 14 before another test bend is measured. This shows how a measured result guides a correction for that job.
π Discover KRRASS EssentialBend
Looking for a practical press brake for routine sheet metal fabrication? The KRRASS EssentialBend range focuses on straightforward programming, repeatable backgauge movement, and dependable daily bending. E310P is one of the controller choices listed for this range.
Explore machine sizes, bending capacities, tooling options, and controller configurations on the EssentialBend page. Tell us your material grade, thickness, maximum bending length, part drawings, and production volume so our team can help review a suitable machine and tooling package.
Learning the E310P, training an operator, or evaluating a press brake? Use this tutorial to explore its everyday operation.
π Contact KRRASS
Website: https://www.krrass.com/
EssentialBend: https://www.krrass.com/essentialbend/
Sales and Technical Enquiries: https://www.krrass.com/contact/
Email: [[email protected]](mailto:[email protected])
Phone / WhatsApp: +86 189 5208 7956
Factory: No. 22, Qilidian Road, Lishui District, Nanjing, China
Request an E310P-equipped press brake quotation, discuss your bending requirements, or contact our team for product information and technical support.
π Stay Connected with KRRASS
Subscribe to KRRASS for more press brake controller tutorials, machine demonstrations, and sheet metal fabrication guidance. Have a question about the E310P? Leave a comment with the operation you would like us to cover next.
