Pingxiang Daier Separation Tech Co., Ltd. Tower Packing

Home
China
Pingxiang
Pingxiang Daier Separation Tech Co., Ltd. Tower Packing

Directions Website

Manufacturer & Exporter of High-Quality Tower Packing & Internals

31/10/2026

Ceramic Foam | Open-Cell Porous Ceramic for Industrial Applications

What makes ceramic foam different from conventional solid ceramic materials?

Its interconnected open-cell porous structure provides a large internal surface area and allows fluid or gas to pass through the material, depending on pore structure and operating conditions.

**Key Characteristics of Ceramic Foam:**

🔹 Open-cell porous structure
🔹 Lightweight construction
🔹 High specific surface area
🔹 Thermal stability, depending on ceramic composition
🔹 Customizable pore density and dimensions

**Where Is Ceramic Foam Used?**

• Industrial filtration systems
• Catalyst support applications
• Gas treatment processes
• High-temperature industrial systems
• Specialized porous ceramic components

At DAIER, we focus on supplying industrial ceramic products with specifications tailored to different application requirements.

Looking for porous ceramic materials for your project?

📩 Contact us for product specifications and technical discussion.

🌐 www.pxdaier.com

25/10/2026

Metal Packing Support Grid

The challenge is not only supporting the packing.

A good support grid must combine:

→ sufficient load capacity
→ high gas open area
→ low pressure drop
→ stable geometry under long-term operation

Too weak = deformation risk.
Too restrictive = unnecessary pressure drop.

Good packed-tower performance starts from the support underneath the packing.

ChemicalEngineering DAIER

25/10/2026

A packing support grid does more than hold the packing bed.

If the open area is too low, gas resistance increases.
If the structure is too weak, the grid may deform under packing weight and operating load.
If the support spacing is wrong, local sagging can affect the whole packed section.

A good metal support grid must balance:

• load-bearing capacity
• high gas open area
• low pressure drop
• structural rigidity
• correct fit with the tower support ring

In packed towers, mechanical support and hydraulic performance have to work together.

18/10/2026

**Inside a Separation Column ⚙️**

A closer look at a custom plastic bubble cap tray assembly.

⚪ Multiple bubble caps
⚪ Vertical tube arrangement
⚪ Multi-level tray construction
⚪ Application-specific design

Every detail matters in industrial separation equipment.

🏭 Pingxiang Daier Separation Tech Co., Ltd.

🌐 www.columninternals.com

📩 DM us for custom tower internals.

ChemicalEngineering IndustrialEquipment DAIER

18/10/2026

**Custom Plastic Bubble Cap Tray Assemblies | DAIER**

Not every separation column uses the same tray design.

Different column diameters, operating conditions, and process requirements may require different bubble cap arrangements.

This plastic bubble cap tray assembly illustrates a customized configuration with multiple caps and vertical tubes.

For custom tray inquiries, useful information includes:

🔹 Column internal diameter
🔹 Required material
🔹 Process application
🔹 Operating temperature
🔹 Drawings or reference photos
🔹 Required quantity

Looking for customized tower internals for your project?

🏭 Pingxiang Daier Separation Tech Co., Ltd.

🌐 https://www.pxdaier.com/

📩 Contact us for technical discussions and quotations.

10/10/2026

Plastic Chevron Mist Eliminator
Built for gas-liquid separation in corrosive industrial environments.
Parallel vane channels help capture and remove entrained liquid droplets while maintaining stable gas flow through the tower.
For scrubbers, absorption towers and industrial gas treatment systems.
Pingxiang Daier Separation Tech Co., Ltd.
www.pxdaier.com
GasTreatment TowerInternals GasLiquidSeparation ChemicalEngineering IndustrialEquipment PingxiangDaier DAIER

10/10/2026

When Should You Consider a Vane Type Mist Eliminator?
Mist eliminator selection depends on the actual gas-liquid separation conditions.
Vane-type mist eliminators are commonly considered where:
• Gas velocity is relatively high
• Good drainage is required
• Pressure drop needs to be controlled
• Corrosive operating conditions require plastic materials
• Tower internals need modular installation
Pingxiang Daier Separation Tech Co., Ltd. supplies vane mist eliminators and other tower internals for scrubbers, absorption towers and industrial gas treatment equipment.
Different materials, dimensions and module configurations can be supplied according to project requirements.
www.pxdaier.com

09/10/2026

Replacing a Liquid Distributor? Dimensions Alone May Not Be Enough.

For existing packed towers, replacement liquid distributors should be checked against the original inlet connection, internal diameter, mounting arrangement, and operating flow range.

The stainless steel pipe distributor shown here features a central flanged connection and multiple branch tubes.

Pingxiang Daier Separation Tech Co., Ltd. (DAIER) supplies industrial tower internals based on confirmed project specifications and manufacturing requirements.

Working on a column maintenance or revamp project? Share your drawings, material requirements, and quantities for a quotation.

🌐 https://www.liquiddistributor.com/

02/10/2026

Fine Desulfurization: Tower Packing for Industrial Gas Treatment

In industrial desulfurization projects, tower packing selection and proper installation are important factors in achieving the required process performance.

Every project has different operating conditions, gas compositions and separation requirements.

At **Pingxiang Daier Separation Tech Co., Ltd.**, we supply tower packing and tower internals for industrial gas treatment and chemical processing applications.

Our product portfolio includes:

✓ Ceramic, Metal & Plastic Tower Packing
✓ Random & Structured Packing
✓ Mist Eliminators
✓ Liquid Distributors
✓ Packing Support & Hold-Down Grids

From product selection to installation preparation, we support international engineering and industrial procurement requirements.

Planning a desulfurization tower or packed column project?

🌐 www.pxdaier.com

02/10/2026

Industrial Gas Treatment | Fine Desulfurization

🏭 Every industrial separation project requires careful preparation.

From tower packing selection to installation planning, every detail matters.

**Pingxiang Daier Separation Tech Co., Ltd.**

Industrial Tower Packing & Separation Solutions

Our products:

✓ Random & Structured Packing
✓ Ceramic, Metal & Plastic Packing
✓ Mist Eliminators
✓ Liquid Distributors
✓ Tower Internals

Supporting industrial gas treatment, chemical processing and packed tower applications.

🌐 www.pxdaier.com

IndustrialEngineering ChemicalEngineering IndustrialSeparation StructuredPacking TowerInternals EPCContractor DAIER PingxiangDaier

Address

江西
Pingxiang
337000

Website

http://www.pxdaier.com/

Alerts

Be the first to know and let us send you an email when Pingxiang Daier Separation Tech Co., Ltd. Tower Packing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.