Qingdao Hexin Machinery Co.,Ltd

Qingdao Hexin Machinery Co.,Ltd HEXIN is focusing on heat resistant castings, centrifugal castings,investment castings,sand casting

Pit Furnace CrossbeamProduct Name: Pit Furnace CrossbeamMaterial: AISI 310Dimensions: 1090*180*355mmSingle Weight: 303kg...
22/04/2026

Pit Furnace Crossbeam

Product Name: Pit Furnace Crossbeam
Material: AISI 310
Dimensions: 1090*180*355mm
Single Weight: 303kg
Manufacturing Process: Finished Sheet Processing

The image shows a recently completed crossbeam. Its main dimensions are 1090*180*355mm, it is made of AISI 310 material, weighs approximately 303kg, and was manufactured using a finished sheet processing process. This crossbeam is used inside a pit furnace as an upper load-bearing beam, and its tested load capacity is 3750kg. After passing quality inspection, the crossbeam has been packaged and shipped.

Diffuser for Bell-Shaped Furnace FrameProduct Name: Diffuser for Bell-Shaped Furnace FrameMaterial: AISI 310SDimensions:...
22/04/2026

Diffuser for Bell-Shaped Furnace Frame

Product Name: Diffuser for Bell-Shaped Furnace Frame
Material: AISI 310S
Dimensions: Φ1586*630mm
Weight: 821kg
Manufacturing Process: Finished Material Processing

The image shows a recently completed bell-shaped furnace frame. Its main dimensions are Φ1586*630mm, it is made of AISI 310S, and weighs approximately 821kg. It was manufactured using a finished material processing and welding process. This furnace frame is used inside a bell-shaped furnace as a bottom load-bearing support. The characteristics of AISI 310S material determine that the bell-shaped furnace frame has excellent high-temperature resistance, good high-temperature strength, good corrosion and oxidation resistance, and is less prone to intergranular corrosion after welding. This bell-shaped furnace frame has passed the quality inspection department's inspection and has been packaged and shipped.

Conical Drum Castings Product Name: Conical Drum Castings Material: 1.4470Dimensions: Φ558/Φ372*615mm/Φ652/Φ422*709mmWei...
22/04/2026

Conical Drum Castings

Product Name: Conical Drum Castings
Material: 1.4470
Dimensions: Φ558/Φ372*615mm/Φ652/Φ422*709mm
Weight: 165.4kg
Manufacturing Process: Casting and Machining
The image shows a recently completed conical drum, made of 1.4470 stainless steel, with dimensions of Φ558/Φ372*615mm/Φ652/Φ422*709mm. It weighs 165.4kg and is machined after casting. 1.4470 is a duplex stainless steel, possessing both ferritic and austenitic structures. Using it in the production of conical drums offers advantages such as higher load capacity and greater safety, long service life and corrosion resistance, cleanliness and compliance, and better overall cost. This batch of conical drums has passed all inspections and has been packed and shipped.

Centrifugal Spun Cast Radiant Tubes, BurnersProduct Name: Radiant Tube, BurnerMaterial: 1.4852 / 1.4848Dimensions: Φ205*...
31/03/2026

Centrifugal Spun Cast Radiant Tubes, Burners

Product Name: Radiant Tube, Burner
Material: 1.4852 / 1.4848
Dimensions: Φ205*2025mm, Φ226*1904mm
Weight: 107kg, 116kg
Manufacturing Process: Centrifugal Casting

The images show radiant tubes and burners completed this month, primarily manufactured using centrifugal casting.
The radiant tubes are Φ205*2025mm in size, weigh approximately 107kg, and are made of 1.4852 material.
The burners are Φ226*1904mm in size, weigh approximately 116kg, and are made of 1.4848 material.
The customer has been ordering radiant tubes and burners of various specifications and sizes for many years.
After thorough inspection, they meet the customer's requirements and have been packed and shipped.

Centrifugal Casting Furnace RollerProduct Name: Furnace RollerMaterial: 1.4848Dimensions: Φ160*2440 mmSingle Weight: 109...
31/03/2026

Centrifugal Casting Furnace Roller

Product Name: Furnace Roller
Material: 1.4848
Dimensions: Φ160*2440 mm
Single Weight: 109kg

The picture shows a batch of Furnace Rollers produced this month.
The dimensions are Φ160*2440 mm, the material is 1.4848, and the weight is approximately 109kg.
They are manufactured using static casting and centrifugal casting, followed by machining and welding.
The furnace Furnace Roller surface quality is excellent, the overall Furnace Roller dimensions are accurate,
and they have passed various tests, meeting customer requirements. They have been packed and shipped.

Sink Rollers for Galvanizing and Aluminizing LinesProduct Name: Sink RollerMaterial: AISI 316LDimensions: Φ711.2 * 2603....
31/03/2026

Sink Rollers for Galvanizing and Aluminizing Lines

Product Name: Sink Roller
Material: AISI 316L
Dimensions: Φ711.2 * 2603.5mm
Weight: 1694kg

The picture shows the photos of the Sink roller recently produced. The size and specification is Φ711.2 * 2603.5mm.
The weight of the Sink roller is 1694kg.
The material is AISI 316L. The surface is sprayed and the roughness is excellent. It has good corrosion resistance.
All aspects have passed the inspection and it has been packed and shipped.
Our company specializes in producing Sink rollers, stabilizing rollers, three-roll six-arm, scrapers, furnace noses and other galvanized line products.

Pump Housing by precision castingProduct Name: Pump HousingMaterial: ASTM A148-120-95Dimensions: 690*569*325mmWeight: 14...
13/03/2026

Pump Housing by precision casting

Product Name: Pump Housing
Material: ASTM A148-120-95
Dimensions: 690*569*325mm
Weight: 140kg
Manufacturing Process: Precision Casting
The image shows a recently completed batch of pump housings. Dimensions are 690*569*325mm, material is ASTM A148-120-95, and weight is approximately 140kg. They are primarily manufactured using precision casting followed by machining and are intended for use in flour mills. This batch of pump bodies has passed all inspections and is shipped individually packaged for customer assembly.

Wheel Hub AccessoriesProduct Name: Wheel Hub AccessoriesMaterial: SAE 1030Size: Φ570 * 80mmWeight: 52kgProduction Proces...
13/03/2026

Wheel Hub Accessories

Product Name: Wheel Hub Accessories
Material: SAE 1030
Size: Φ570 * 80mm
Weight: 52kg
Production Process: Precision Casting + Machining
Pictures show a batch of wheel hub accessories produced recently. The material is SAE 1030, with a specification of 1Φ570 * 80mm. The weight is 52kg. The main process is precision casting with silica sol followed by machining. The precision is high. All aspects have been inspected and qualified. They have been packed and shipped.

Heat Treatment FixtureProduct Name: Heat Treatment FixtureMaterial: 2.4879Dimensions: 1170*860*H mmSingle Weight: 85kg/3...
13/03/2026

Heat Treatment Fixture

Product Name: Heat Treatment Fixture
Material: 2.4879
Dimensions: 1170*860*H mm
Single Weight: 85kg/3.1kg/3.9kg, etc.
Manufacturing Process: Precision Casting
The image shows a recently produced batch of heat treatment fixtures made of 2.4879 stainless steel. The fixtures measure 1170*860*H mm and include a base tray, posts, crossbeams, load-bearing beams, and other accessories. The weights are mainly 85kg/3.1kg/3.9kg, etc. The main process is silica sol precision casting. The customer places stable orders annually, and the fixtures have passed all inspections and are now packaged and shipped.

Tray, Carrier bar by Precision CastingProduct Name: Tray, Carrier bar by Precision CastingMaterial: 1.4849Dimensions: 89...
13/03/2026

Tray, Carrier bar by Precision Casting

Product Name: Tray, Carrier bar by Precision Casting
Material: 1.4849
Dimensions: 890*490*40mm, 420*45*60mm
Weight: 30kg, 2kg
Production Process: Precision Casting
The picture shows the recently produced precision cast trays and support beams with dimensions of 890*490*40mm and 420*45*60mm. The material is 1.4849 and they are produced by the precision casting process using silica sol. The trays and support beams are combination parts of heat treatment jigs and are assembled with other parts. The precision casting process for this structure has the advantages of precise dimensions and low deformation. After this batch of trays and support beams passed the inspection by the quality control department and were packaged for shipment.

Straight Tube Radiant TubeProduct Name: Straight Tube Radiant TubeMaterial: 1.4848Size: Φ153 * 1650mmWeight: 68kgProduct...
13/03/2026

Straight Tube Radiant Tube

Product Name: Straight Tube Radiant Tube
Material: 1.4848
Size: Φ153 * 1650mm
Weight: 68kg
Production Process: Centrifugal Casting
The picture shows the straight tube radiant tube recently completed in production. The size is Φ153 * 1650mm, the weight is 68kg, and the material is 1.4848. The main body of the radiant tube is cast by centrifugal method, and the tail is precisely cast. After inspection, it meets the customer's requirements and has been qualified for shipment. In the production process of the radiant tube, centrifugal casting is the main production process, which can meet the production of radiant tubes of various diameters.

Address

Qingdao
266000

Telephone

86-532-6777 5336

Website

Alerts

Be the first to know and let us send you an email when Qingdao Hexin Machinery Co.,Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Qingdao Hexin Machinery Co.,Ltd:

Shortcuts

Share

Category