Xuansheng-Mold & Molding

Xuansheng-Mold & Molding One-stop plastic injection service, providing ODM & OEM service.

11/04/2026

🔧 High-quality products originate from high-precision molds.

Only by being meticulous about every inch of the mold's "smoothness" can we ensure every single product is flawless.

Precision manufacturing is not just a process—it's a mindset.

27/03/2026

🎥 First-Shot Success – Precision Delivered!

Automotive seat components with complex curvatures and ±0.25mm contour accuracy—we met the tolerance on the very first trial, with no post-adjustment needed!

✅ High-precision mold design
✅ Advanced mold flow simulation for warpage control
✅ First-shot success saves time and cost

Watch the video to see precision in action.

📩 Contact us to discuss your project:
✉️ [email protected]
📞 +86 13802197597
🌐 www.molds-maker.com

19/03/2026

🤖 Smart robot cover · Inverted submarine gate with angled ejector
✅ Large appearance part
✅ Zero surface defects (no sink marks/stress marks/weld lines)
✅ Production-ready at T1 trial
✅ Eliminated painting cost for the client
Structural design that delivers both quality and cost efficiency.

14/03/2026

Plastic injection part requires 58 copper nuts -- Insert mold

From mold design to injection molding—we've got you covered! With our 25,000㎡ owned facility, TXS specializes in a full range of precision mold technologies:
✅ Precision, Insert, Two-Shot, Over Molds
✅ Deep Cavity, Multi-Cavity, Unscrewing Molds
✅ Hot & Cold Runner Systems
Watch our machines in action—every cut reflects our commitment to quality. Whatever your mold needs, we deliver custom solutions for smooth mass production.
📩 Contact us to discuss your project:
✉️ [email protected]
📞 +86 13802197597
🌐 www.molds-maker.com

28/02/2026

🎬 Factory Live | TXS Precision Manufacturing in Action

From mold design to injection molding—we've got you covered! With our 25,000㎡ owned facility, TXS specializes in a full range of precision mold technologies:

✅ Precision, Insert, Two-Shot, Over Molds
✅ Deep Cavity, Multi-Cavity, Unscrewing Molds
✅ Hot & Cold Runner Systems

Watch our machines in action—every cut reflects our commitment to quality. Whatever your mold needs, we deliver custom solutions for smooth mass production.

📩 Contact us to discuss your project:
✉️ [email protected]
📞 +86 13802197597
🌐 www.molds-maker.com

25/02/2026

TXS Precision Manufacturing: Your One-Stop Partner from Mold to Production

TXS is a Taiwan-founded precision mold manufacturer with an operational base in Mainland China. Our extensive 25,000-square-meter owned facility serves as the cornerstone of our manufacturing excellence.

Specialized Mold & Molding Technologies:
✅Precision Mold & Molding
✅Insert Mold & Molding
✅Two-Shot Mold & Molding
✅Over Mold & Molding
✅Deep Cavity Mold & Molding
✅Multi-Cavity Mold & Molding
✅Unscrewing Mold
✅Hot & Cold Runner Systems

E-mail：[email protected]
WhatsApp:+008613802197597
Web: www.molds-maker.com

🤝 Client Visit DayWe welcomed our valued partners to the workshop today. Reviewing molds, discussing processes, going th...
24/02/2026

🤝 Client Visit Day
We welcomed our valued partners to the workshop today. Reviewing molds, discussing processes, going through details—every visit marks a deeper step in collaboration.

🧧 Happy Chinese New Year!As the Lunar New Year begins, the entire TXS team extends our warmest greetings to you! Thank y...
16/02/2026

🧧 Happy Chinese New Year!
As the Lunar New Year begins, the entire TXS team extends our warmest greetings to you! Thank you for your continued trust and support. In the year ahead, we remain committed to delivering quality mold solutions with expertise and dedication.
Wishing you and your family prosperity, joy, and success!

🚀 How We Scored Full Marks When “Two-Shot Appearance” Met “Dense Undercuts”?We recently completed a two-color appearance...
16/02/2026

🚀 How We Scored Full Marks When “Two-Shot Appearance” Met “Dense Undercuts”?

We recently completed a two-color appearance part mold using PC+ABS and TPS. With complex internal structures and multiple undercuts, this project is considered a “high-difficulty routine” in mold engineering.

🧩 Our Approach:
✔️ Scientific Simulation: CAE analysis optimized gate design and predicted warpage for flawless appearance
✔️ Structural Ingenuity: Original “front slider in rear mold” layout achieved smooth ejection of all undercuts in tight space
✔️ Efficient Ex*****on: The mold reached production standards after just two trial runs and was delivered to the client

We believe a mold should not only “work” but also “work beautifully and consistently.” If you’re also developing complex appearance parts or two-shot components, let’s connect!

07/02/2026

TXS Precision Manufacturing: Your One-Stop Partner from Mold to Production

TXS is a Taiwan-founded precision mold manufacturer with an operational base in Mainland China. Our extensive 25,000-square-meter owned facility serves as the cornerstone of our manufacturing excellence.

Specialized Mold & Molding Technologies:
✅Precision Mold & Molding
✅Insert Mold & Molding
✅Two-Shot Mold & Molding
✅Overmold & Molding
✅Deep Cavity Mold & Molding
✅Multi-Cavity Mold & Molding
✅ Unscrewing Mold
✅Hot & Cold Runner Systems

E-mail: [email protected]
WhatsApp:+008613802197597
Web: www.molds-maker.com

🛠️ Story Time: Why We Always Say “A Mold’s Value Isn’t on the Quotation”?A client came to us urgently needing to remake ...
30/01/2026

🛠️ Story Time: Why We Always Say “A Mold’s Value Isn’t on the Quotation”?

A client came to us urgently needing to remake a mold. Previously, to control the budget, he chose the lowest-quoted supplier. The result? The mold cracked shortly after production started, bringing everything to a halt.

In the end, he paid not only for a second mold but also for months of delay, wasted production resources, and a missed market window—the total cost far exceeded the initial “savings.”

We understand cost pressure, but we believe even more: A reliable mold is the first line of defense for production stability. We don’t offer the cheapest option; we offer the most dependable one.

If you’re also weighing mold quality against short-term budget, let’s talk—we deliver total lifecycle cost optimization.

📩 [email protected]
🌍 www.molds-maker.com

"Mission: Impossible" Accepted & Succeeded! 🚀 Placing 58 Brass Inserts Perfectly.How do you ensure 58 brass inserts are ...
22/11/2025

"Mission: Impossible" Accepted & Succeeded! 🚀 Placing 58 Brass Inserts Perfectly.
How do you ensure 58 brass inserts are placed perfectly in a medical part, without a single one out of place?
We just nailed it!
✅ The Mission: Flame-retardant ABS, 58 inserts, ZERO visual defects.
✅ Our Strategy:
➤ Virtual Rehearsal: Mold Flow Analysis ensured balanced plastic flow for perfect aesthetics.
➤ Smart Tooling: A custom high-precision fixture placed all 58 inserts at once, boosting speed and accuracy!
The Win: The mold was approved for mass production after just the 3rd trial (T3)! The client is thrilled. 🎉
DM us!
📩 [email protected]
🌍 www.molds-maker.com

Address

Shangmatai Industrial Zone, Wuqing District
Tianjin
301701

Opening Hours

Monday 08:00 - 19:00
Tuesday 08:00 - 19:00
Wednesday 08:00 - 19:00
Thursday 08:00 - 19:00
Friday 08:00 - 19:00
Saturday 08:00 - 19:00

Telephone

+8613802197597

Website

Alerts

Be the first to know and let us send you an email when Xuansheng-Mold & Molding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Xuansheng-Mold & Molding:

Shortcuts

Share

Category