LNZC color steel company

30/11/2016

C-shaped steel is made by cold-bending of hot-rolled plate. Its wall thickness is light and its section is excellent and its strength is high. Compared with traditional channel steel, C-shaped steel can save 30% of material. C steel raw materials are generally divided into two kinds of galvanized belt and black belt.
Z-plated galvanized steel: is a common cold-formed thin-walled steel, the thickness is generally between 1.6-3.0mm, high cross-section between 120-350mm. Processing materials for hot-rolled (painting), galvanized. Processing standards by GB50018-2002 implementation. Z-beam steel is usually used in large-scale steel plant. Machining length and hole for production requirements by processing.
If you want to get more information about C&Z purlins, plz visit our web www.lncolorsteel.com or send an e-mail to us [email protected].

23/11/2016

Magnesium-manganese plate is a very cost-effective roof, wall materials. Aluminum alloy in the construction industry has been widely used for modern architecture to the comfortable, light, durable, economic, environmental protection and other development has played an important role. AA3004 aluminum magnesium manganese alloy due to structural strength moderate, weathering, resistant to stains, easy bending welding and other advantages, is generally recognized as the architectural design life of more than 50 years of roofing, wall materials; in response to maritime climate architecture design, optional Corrosion-resistant more powerful 5052 ship-class aluminum alloy material.ther walls.
contact way:[email protected]

23/11/2016

Color plate, refers to the color coated steel, color coated steel plate is a layer with organic coating. Color plate is divided into veneer, Caigang composite board, floor boards and so on. Widely used in large public buildings, public buildings, activities of the board room, and integrated housing walls and roofing
Main categories:
Color plate substrate for the cold-rolled substrate, hot-dip galvanized substrate and electro-galvanized substrate. Coating types can be divided into polyester, silicon modified polyester, polyvinylidene fluoride and plastic sol. The surface of the color steel plate can be divided into coating plate, embossing plate and printing plate, color steel plate is widely used in the construction of household appliances and transportation and other industries, for the construction industry is mainly used for steel structure factories, airports, Commercial construction of the roof walls and doors and so on.
Color steel plate Model: 373 type, 750 type, 760 type, 780 type, 820 type, 840 type, 860 type, 875 type, 900 type, 950 type, etc.
【Color】 Conventional for the sea blue, lime, crimson, other colors to be customized.
Contact way: [email protected]

23/11/2016

EPS/ROCK WOOL/FITER sandwich panel
1, Color steel sandwich panels, often using the mouth of plug-in, it is easy to install, save time, material, good flatness, high strength, especially for ceiling, partition system.
2, thickness (mm): 50-250;
3, the length (mm): As a result of continuous molding production, board length can be determined according to user needs;
4, Width (mm): 1150 (1200) (960) (950);
5, the core material properties: A, polystyrene bulk density: ≥ 15kg / m3 thermal conductivity ≤ 0.036W / m.K maximum operating temperature: about 100 degrees.
contact way:[email protected]

23/11/2016

Z-plated galvanized steel: is a common cold-formed thin-walled steel, the thickness is generally between 1.6-3.0mm, high cross-section between 120-350mm. Processing materials for hot-rolled (painting), galvanized. Processing standards by GB50018-2002 implementation. Z-beam steel is usually used in large-scale steel plant. Machining length and hole for production requirements by processing.
contact way: [email protected]

23/11/2016

Reinforced steel truss is the floor of the steel plate in the factory using imported equipment processed into steel truss, and steel truss and galvanized steel plate welded to the factory in one combination template. The formwork system is composed of a steel bar in the concrete floor and a construction template, which can bear the weight of the wet concrete and the construction load during the construction phase, and can be used as the lateral support of the steel beam in the construction stage. In use, the steel trusses work in conjunction with the concrete and are subjected to the applied load.
Steel truss floor bearing board TD1-70 parameters are as follows:
Winding 8, under the string 6, abdominal diameter 4, bottom mold 0.5 (mm)
Truss height: 70mm
Concrete floor thickness: 100mm
Board width: 600mm
Board length: can be customized
contact way: [email protected]

23/11/2016

C-shaped steel is made by cold-bending of hot-rolled plate. Its wall thickness is light and its section is excellent and its strength is high. Compared with traditional channel steel, C-shaped steel can save 30% of material. C steel raw materials are generally divided into two kinds of galvanized belt and black belt.
【Specification】
C-shaped steel purlins are divided into 80, 100, 120, 140, 160, 180, 200, 220, 250, 280, 300 and other specifications according to the section height. The length can be determined according to engineering design. However, considering the conditions of transportation and installation, The total length is not more than 15 meters.
【Application】
C steel is widely used in the purlin of steel structure, wall beams, but also can be combined into a lightweight roof trusses, brackets and other building components. In addition, can also be used for mechanical light manufacturing in the column, beam and so on.
contact way: [email protected]

23/11/2016

Galvanized pressure floor
As a professional manufacturer of floor plates, in the case of steel beam span and the height of concrete is negligible, to tell the truth is still the highest cost-bearing floor plate models, is YX73-140-760-type steel plate. Taking into account the material, utilization, freight and other issues, it is the most cost-effective, of course, is the floor board with the most models. Here to briefly introduce the YX73-140-760 steel template.
YX73-140-760 open floor for the board / steel bearing plate Detailed parameters:
Specifications: Expand 1000mm, limited width 760mm
Thickness: 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm, 1.2 mm, 1.5 mm
Substrate: galvanized sheet, galvanized sheet, steel bearing platecomplete specifications, affordable, with absolute superiority..
Power plant, electric power equipment company, automobile exhibition hall, steel structure workshop, cement warehouse, steel structure office
contact way: [email protected]

19/11/2016

Ningxia Yinchuan LeiNuoZhiCheng Co., Ltd. is located in Jinyuan West Road, Wangyuan Industrial Park, Yinchuan City, Ningxia. It covers an area of 25 mu and the workshop area is 11000m2. Is a strong light steel and building materials manufacturing enterprises. Mainly engaged in the production of steel truss floor boards, magnesium-manganese plate, color steel veneer and accessories, sandwich panels, C / Z-steel purlins, large steel structure and grid.

We have the spirit of “excellent quality, integrity-based” business philosophy and the “well-equipped, leading products,” the pursuit of strategy, to customers, “I have no people, I have excellent” commitment. The company over the years with a number of enterprises to establish a long-term relationship, such as the construction of the Group, Sinopec Construction Group, China Railway Construction Group, Ningxia Construction Engineering Group, built in traffic, Xuzhou Coal, China Railway 13 Bureau, Yinchuan Grand Theater.

19/11/2016

Our Factory

19/11/2016

19/11/2016

Al – Mg – Mn metal roof panel TYPE- YX65-420 vertical double – lock side
Magnesium-manganese plate is a very cost-effective roof, wall materials. Aluminum alloy in the construction industry has been widely used for modern architecture to the comfortable, light, durable, economic, environmental protection and other development has played an important role. AA3004 aluminum magnesium manganese alloy due to structural strength moderate, weathering, resistant to stains, easy bending welding and other advantages, is generally recognized as the architectural design life of more than 50 years of roofing, wall materials; in response to maritime climate architecture design, optional Corrosion-resistant more powerful 5052 ship-class aluminum alloy material.ther walls.