MIRAI INTEX

27/05/2025

✨Safety and Reliability in Industrial Refrigeration: Technical Solutions by MIRAI Intex

At MIRAI Intex, system design focuses on operational reliability, environmental safety, and minimizing downtime. Below is a brief overview of two engineering solutions implemented in our equipment.

🔍 1. HTF Leak Detection and Prevention System

MIRAI units are equipped with four independent sensors installed at key locations within the system. These sensors can detect even minor leaks of heat transfer fluid (HTF) and respond based on the risk level:
– Either by sending a warning to the operator,
– Or by automatically shutting down the system if the leak presents a potential hazard.
A key feature of the design is the complete absence of refrigerants such as freon. This eliminates the risk of refrigerant leakage altogether and significantly reduces environmental risks during operation.

⚡ 2. Rapid Automatic System Restart in Case of Power Interruptions

In the event of power outages or voltage fluctuations on the customer’s side, MIRAI systems can automatically restart and restore all operating parameters within 30 seconds — without requiring operator intervention.
This functionality is enabled by the air cycle technology and the refrigerant-free design, which significantly simplifies the restart process and ensures minimal downtime.

⏱️ This feature is particularly important for facilities operating in environments with unstable power supply, where consistent cooling performance and fast recovery are critical.

22/05/2025

🔧 Revolutionizing Cooling with the Reverse Brayton Cycle
At MIRAI INTEX, we harness cutting-edge air cycle technology — also known as the reverse Brayton cycle with recuperator — to deliver highly efficient, eco-friendly, and reliable cooling solutions for the most demanding environments.

🌬️ How It Works
The Process:
1. COMPRESSION – Ambient air is compressed, increasing its pressure and temperature.
2. HEAT EXCHANGE – The hot, compressed air is cooled in a water-cooled heat exchanger.
3. RECUPERATION – The air is further cooled in a recuperator by exchanging heat with the returning low-temperature air.
4. EXPANSION – The cooled air is expanded in a turbo expander, drastically dropping its temperature. This ultra-cold air is then used to cool a chamber (open-cycle) or a heat transfer fluid (in X Cryo and closed-cycle systems).
5. RECIRCULATION – The return air passes back through the recuperator, recovers heat, and is recompressed — repeating the cycle continuously.

📘 Why the Reverse Brayton Cycle?
The reverse Brayton cycle is a gas-based thermodynamic process ideal for refrigeration and cooling in aerospace, cryogenics, and specialized industrial systems where traditional refrigerants fall short.

✅ Key Advantages of Mirai Intex Technology
🟢 No Harmful Refrigerants
Uses clean, natural gases like air or helium — no CFCs, HFCs, or toxic chemicals.
🟢No Phase Changes
The working fluid remains a gas at all times — no need for evaporators or condensers, reducing system complexity.
🟢Operates in Extreme Environments
Performs reliably in ultra-low or high ambient temperatures — ideal for aviation, space, and cryogenics.
🟢Simple, Robust, and Reliable
Minimal moving parts mean low maintenance and high durability. No liquid seals = no leakage risks.
🟢Direct Heat Exchange with Air
Ambient air can be used directly for cooling, eliminating the need for sealed loops.
🟢Lightweight and Compact
Designed for aerospace and mobile systems where space and weight are critical.
🟢Rapid Start-Up
Gas-only system enables fast response — no delays from vaporization or condensation.

🌍 MIRAI INTEX isn’t just innovating in cooling —
we’re shaping a cleaner, safer, and more efficient future.

🔗 Learn more at https://mirai-intex.com/technologies or contact us to discover how our machines can meet your cooling demands.

20/05/2025

Seamless Integration: How MIRAI INTEX Solutions Become Part of Your Product 🌍

In the world of engineering solutions, the key to success is flexibility, efficiency, and regulatory compliance. That’s why more and more OEM companies are choosing MIRAI INTEX refrigeration systems as a ready-to-integrate technological foundation for their products.

📌 Trusted by Industry Leaders: For years, OEM manufacturers have been partnering with us, integrating our machines into their systems. They value our reliability, stability, and ease of implementation — making our systems a natural extension of their engineering designs.

Our units are fully self-contained, energy-efficient refrigeration solutions that can be easily embedded into any project:
✅ Minimal connection requirements — just four ports: two for air and two for cooling water.
✅ Air as the refrigerant — zero risks, zero emissions, and full compliance with all environmental regulations (including F-Gas, EPA, and more).
✅ Wide temperature range — from +90°C to -160°C.
✅ Part-load operation — you only consume as much energy as needed at any given moment. This is especially important for applications with variable thermal loads and makes our systems more efficient than cascade systems.

📦 Integrating MIRAI INTEX means:
A reliable OEM platform, ready for fast and hassle-free integration
Guaranteed performance and long service life
Freedom from refrigerant restrictions — using air as the working medium provides total flexibility and resilience to regulatory changes

🏭 Our solutions are used in some of the most demanding industries, including blood plasma storage, lyophilization, chip testing and manufacturing, pharmaceuticals and biostorage, chemical production, and more.

🤝 Join a network of innovation — MIRAI INTEX has already become part of many cutting-edge engineering solutions
We’re a partner you can trust. Look at some of our projects on our web page: https://mirai-intex.com/page/references

📩 Ready to discuss integration? Contact us — we’re open to new partnerships.

19/05/2025

🔬 Why Precise Temperature Control in Cryotherapy Is Critical — and How MIRAI INTEX Makes It Simple and Safe

In cryotherapy, there’s no room for error: even slight temperature deviations can impact treatment effectiveness and patient safety.
MIRAI INTEX offers a fully integrated, energy-efficient refrigeration solution with a working range from -40°C to -160°C, ideal for cryo chambers, medical equipment, and pharmaceutical applications.

Key advantages:
✅ Accurate performance under partial load — consume only as much energy as needed in real time.
✅ Natural refrigerant: air — completely safe, free, regulation-proof, and compliant with all global standards.
✅ The MIRAI X CRYO model operates from +90°C to -160°C, enabling not just cooling but rapid heating when required — perfect for mode changes or system prep.
✅ No cascade compromises — just stable, flexible, eco-conscious performance.
✅Ideal accuracy of ±0.5°C under changing load.

If you’re an engineering or OEM company looking for reliable, advanced low-temperature solutions — we’re ready to support your project.

📩 Get in touch — let’s discuss how MIRAI INTEX can give you a technological edge.

16/05/2025

🔧 FAQ | Can Mirai Intex units be integrated into an existing cooling process?

Yes. In fact, this is one of the core principles behind the design of our cooling solutions.
MIRAI INTEX refrigeration units are specifically engineered for easy and fast integration into existing processes — without the need to redesign or overhaul your infrastructure.

✅ Plug & Play Integration
Connecting MIRAI INTEX units is literally “plug and play.”
You only need four connections:
2 air lines: inlet and outlet for the closed-loop cooling circuit
2 HTF (heat transfer fluid) lines: inlet and outlet for glycol, oil, or another working fluid
This minimizes interference with your current system and significantly reduces commissioning time.

🌡️ Flexible Temperature Range: from +90°C to -160°C
This wide range makes Mirai Intex a versatile solution for various applications — from high-temperature cooling to deep freezing.
Our systems can be integrated into both new installations and existing production lines.

📊 Multi-functionality: One Platform — Dozens of Applications
Our technology is used across industries that demand precise temperature control and equipment reliability:

Pharmaceuticals & Biotechnology:
• Lyophilization (freeze-drying)
• Drying of sensitive materials
• Storage of vaccines, plasma, cell cultures, and biomaterials

Chemical & Petrochemical Industries:
• Reactor cooling
• Temperature control in aggressive environments

Testing Labs & Climatic Chambers:
• Component testing under extreme temperatures
• Simulation of various climate conditions

Cryotherapy & Medicine:
• Therapeutic cooling
• Recovery for athletes and patients

Metallurgy & Mechanical Engineering:
• Ultra-fast freezing of parts and materials
• Precision thermal treatment

🌍 Eco-Friendly and Safe: Only Air
MIRAI INTEX units use air as the refrigerant — a fundamental advantage:
-Requires no licenses or special permits
-Poses no hazard in case of leakage
-Complies with all environmental regulations
-Has no storage limitations

⚡ Energy Efficiency: Partial Load Operation
Our systems automatically adjust to current cooling demand.
-Reduce electricity consumption
-Lower operating costs
-Increase overall system efficiency
You use exactly as much energy as needed — no more, no less.

🤝 Why do leading manufacturers (OEMs) choose us?
We’re not just a supplier — we’re a reliable partner for your cooling projects.
Companies from various sectors already trust us: from pharmaceuticals and cryobiology to high-tech engineering and microelectronics.

📞 Want to know how Mirai Intex can be integrated into your process Contact us

15/05/2025

🔧 Partial load is not an exception. It’s the MIRAI standard.

Smart, adaptive, energy-efficient — every MIRAI machine is built to run in partial load mode from the ground up. It’s not a feature. It’s our philosophy.

❄ Why does it matter?
Industrial cooling must be flexible. If your system can’t adapt to real-world conditions (season, time of day, load shifts), you’re losing energy, money, and efficiency.
With MIRAI INTEX:
✅ Power is precisely adjustable — from 3% to 100%
✅ You use only the energy you actually need
✅ No surges, no shutdowns, no efficiency loss
✅ Refrigerant? Only air. GWP = 0

📉 Want to see real-world test results and a graph showing how cooling power and energy use grow in perfect sync?

➡ Head over to our full article and see why cascade systems can’t keep up when flexibility is key: https://mirai-intex.com/news/mirai-intex-is-revolutionizing-cryogenic-technology-2

14/05/2025

⭐ Unlock the Future of Cryogenics with the Advanced and Versatile MIRAI X CRYO Line!

In a world where precision and efficiency are non-negotiable, the MIRAI X CRYO line redefines cryogenic technology. Engineered to operate within an impressive temperature range of -160°C to +90°C, these innovative refrigeration systems are built to serve a broad spectrum of industrial applications.

🔧 Tailored Solutions for Every Need:

🔹 X Series
Versatile and dependable, the X Series delivers stable performance across general cryogenic applications—ideal for routine processes that demand high efficiency and reliability.

🔹 XM Series
“M” stands for multifunctionality. XM models offer powerful performance in a compact footprint—perfect for installations where space is limited but high power is essential.

🔹 XS Series
“S” stands for semiconductor. XS machines are specially designed for the demanding standards of the semiconductor industry. With two independent circuits and a compact form, they ensure superior precision and control.

Key Advantages of the MIRAI X CRYO Line:

🔷 Ultra-wide temperature range: -160°C to +90°C

🔷 Exceptional energy efficiency and reliability

🔷 High temperature precision, even under variable loads

🔷 Custom configurations tailored to specific industrial needs

🔷 Space-saving design for streamlined integration

🔷 Engineered for cleanroom compatibility

🔷 Uses natural refrigerants – fully F-Gas free and environmentally friendly

Whether you're preserving sensitive materials or enabling cutting-edge processes in pharmaceuticals, semiconductors, or advanced manufacturing, the MIRAI X CRYO line delivers unmatched performance with sustainability in mind.

👉 Contact us today to learn how the MIRAI X CRYO line can elevate your cryogenic capabilities.

🌐 Visit: https://mirai-intex.com/products/mirai-x-cryo/c3

13/05/2025

❄️ Closed-Cycle cooling machines: Two Approaches — One High-Efficiency Solution

At MIRAI INTEX, we offer two types of refrigeration systems designed to meet a wide range of industrial needs:
✅ CWT — units with an integrated internal heat exchanger. High performance machines are suitable for both indoor and outdoor installation.
✅ LNG — high-capacity machines equipped with an external heat exchanger for maximum performance, suitable for both indoor and outdoor installation .

💡 With a wide operating temperature range from -40°C to -160°C, our technology supports everything from low-capacity setups to high-power applications across various industries.

📽 Check out the animated diagram to see how these two system types differ — and discover which one is right for your business.

👉 Visit our website and find the perfect refrigeration machine for your application:

12/05/2025

Sustainable Retrofit in Action – Powered by Air!❄️

We're excited to highlight our innovative retrofitted lyophilization system with the centralized air refrigeration system from MIRAI INTEX – installed in close collaboration with our amazing partners HOF Sonderanlagenbau GmbH, Refolution Industriekälte GmbH, and for global biopharma leader CSL.

This initiative is a great illustration of how cutting-edge technology and sustainable innovation unite to revolutionize key cooling infrastructure.

At MIRAI INTEX with our partners, we have expertise in retrofits which:
🔹 Avoid refrigerant-related headaches
🔹 Reduce emissions – we use air as our refrigerant
🔹 Increase dependability and long-term performance
🔹Future-proof your processes against regulatory constraints

When you select MIRAI INTEX, you are selecting peace of mind, eco-friendliness, and industry-leading cooling performance.

A big thank you to our partners for the trust, professionalism, and collaboration which made all of this possible! 🤝

🌍 ❄️ 🌱 Watch the video to witness how this retrofit is transforming the future of sustainable refrigeration:

09/05/2025

🌍 Navigating the new EU F-Gas regulation can be a challenge — but with MIRAI INTEX, it becomes an opportunity.

2023 was the hottest year on record. The climate crisis is accelerating. The EU is stepping up: a 55% emissions reduction by 2030 and climate neutrality by 2050 demand bold new solutions.
As highlighted in the article “EU F-gas Regulation 3.0 – Because We Can” by Industria Formazione, the message is clear — the time to act is now.
Mirai Intex delivers a ready-made solution: air cycle technology that ensures:
🟢 Zero GWP refrigerant — no quotas, bans, or service restrictions
🟢 Simplified compliance — no complex certification or emission control requirements
🟢 Reduced operational burden — no quota management or CO₂-related costs
🟢 Hassle-free exports — fully regulation-ready, no exemptions needed
🟢 Future-proof design — built for the next generation of standards

🔍 Want to understand how F-Gas Regulation 3.0 will reshape the industry and why MIRAI INTEX is your trusted transition partner?

📖 Read the full article on our website —https://mirai-intex.com/news/navigate-the-new-eu-f-gas-landscape-with-mirai-intex-future-proof-cooling-guaranteed

MIRAI INTEX — where innovation meets sustainability. Without compromise.

According to the article "EU F-gas Regulation 3.0 – Because We Can" published by Industria Formazione, the new EU F-gas Regulation represents a significant shift in the landscape of cooling and refrigeration technologies.

07/05/2025

Modern cold rooms demand precision, reliability, and sustainability. At MIRAI INTEX, we go far beyond conventional solutions.
We develop revolutionary refrigeration systems using AIR as the refrigerant, operating across an extraordinary temperature range — from +90°C to -160°C.

What this means for your business:
✅ Unmatched flexibility — from heating to ultra-low temperatures in a single system
✅ Eco-conscious design — air as refrigerant means 0 GWP, non-toxic, non-flammable
✅ Versatile applications — pharma, R&D, logistics, food industry, chemicals
✅ High reliability — no leaks, no phase-outs, no regulatory hassle

Our systems integrate seamlessly into cold rooms of all types:
🔹 Pharmaceutical storage and research facilities
🔹 Industrial freezer warehouses
🔹 Test chambers requiring extreme temperatures
🔹 Agricultural and logistics hubs

🌍 With such a wide temperature range and clean refrigerant technology, MIRAI INTEX isn’t just an alternative — it’s the future of cooling, available today.
Extreme range. Natural refrigerant. Limitless possibilities.

06/05/2025

🔊 How quiet is Mirai Intex equipment?

Listen… or better yet — try to hear it. 😉

In this video, we measured the noise level of our machine during operation — and the results speak for themselves.
When we say our machines are quiet, we don’t mean "kind of quiet."
We mean truly quiet.
In environments where noise isn’t just an inconvenience but a factor impacting health and productivity, low noise levels are a real advantage.
✅ Operator comfort
✅ Safer working environment
✅ No constant hum in the background

🎥 Watch the video and hear — or barely hear — the difference. Silence, measured in decibels.
https://www.youtube.com/watch?v=C4oMxB-wZNQ