Gravity+ Composites

Gravity+ Composites Manufacturing 100% carbon fiber parts via vacuum infusion process. No fiberglass. No excessive resin. Feel free to contact for more info.

Producing extra stiff and lightweight parts with perfect look and fitment.

Finally finished air intake duct for Golf Mk6 GTI (possibly also R). As usual, resin infused full carbon part coated wit...
23/01/2025

Finally finished air intake duct for Golf Mk6 GTI (possibly also R). As usual, resin infused full carbon part coated with premium automotive clearcoat.
Price is set to 139€ plus shipping (10/15€).
Order can be made via PM.

1173 Kg with full tank? Let’s see how much we can cut down with some weight reduction tuning (carbon parts, bucket seats...
26/06/2024

1173 Kg with full tank? Let’s see how much we can cut down with some weight reduction tuning (carbon parts, bucket seats, rear seat delete, small battery…). 1100? 1050? Or even 1000?😁

Same shape, same details, but yet so different… 3090g OEM steel fender vs 1060g full carbon fiber part for VW Golf Mk3 G...
08/07/2023

Same shape, same details, but yet so different… 3090g OEM steel fender vs 1060g full carbon fiber part for VW Golf Mk3 GTI.

Full carbon fiber hood for VW Golf Mk3 GTI, the most difficult part I did so far. Exact copy of OEM hood including inner...
18/12/2022

Full carbon fiber hood for VW Golf Mk3 GTI, the most difficult part I did so far. Exact copy of OEM hood including inner bracing, made with 3 different types of carbon fabric and equipped with functional latch for original lock mechanism. Ended up with weight of 5.3 Kg - 65% less than OEM steel hood.

Final cooperation with on his hillclimb RX7 FD - full carbon fiber front end. Hard work and preparation paid off and re...
18/01/2022

Final cooperation with on his hillclimb RX7 FD - full carbon fiber front end.
Hard work and preparation paid off and resulted in almost perfect part with zero pinholes or bridged spots. Trimming is yet to be done, however it is already obvious that balance between weight and stiffness was nailed nicely.
Now let's pray for this piece to survive at least one hillclimb season😁





Full carbon fiber headlight delete kit for Honda S2000 with matte clearcoat😍 Absolute must for every S2K racecar, no so ...
21/09/2021

Full carbon fiber headlight delete kit for Honda S2000 with matte clearcoat😍 Absolute must for every S2K racecar, no so street legal though😅

Full carbon fiber wing uprights for time attack Lan Evo! Each piece made out of 30 layers of carbon fiber with mix of tw...
29/08/2021

Full carbon fiber wing uprights for time attack Lan Evo! Each piece made out of 30 layers of carbon fiber with mix of twill, biaxial and unidirectional weave. Final thickness around 9,5mm and weight of 960g (aluminium one was over 1800g).

Next full carbon fiber part for RX-7 FD😁 fuel tank cover, exact copy of OEM including harness cover. ...
26/02/2021

Next full carbon fiber part for RX-7 FD😁 fuel tank cover, exact copy of OEM including harness cover.

Cold air intake ducts dor VW Golf Mk5 GTI restocked! Supply you combustion chambers with the coldest air possible🥶 ...
12/11/2020

Cold air intake ducts dor VW Golf Mk5 GTI restocked! Supply you combustion chambers with the coldest air possible🥶

Agressive looking TTRS with full carbon fiber canards😍 one set in stock ready to be shipped, let me know if interested! ...
07/11/2020

Agressive looking TTRS with full carbon fiber canards😍 one set in stock ready to be shipped, let me know if interested!

Few carbon bits and pieces I made for my personal RX-7 FD project. Why use aluminium when there is carbon, right?😋 ...
02/11/2020

Few carbon bits and pieces I made for my personal RX-7 FD project. Why use aluminium when there is carbon, right?😋

Who said carbon race parts suppose to look ugly?😉 This is full carbon fiber dash for future hillclimb racecar Mazda RX-7...
29/10/2020

Who said carbon race parts suppose to look ugly?😉 This is full carbon fiber dash for future hillclimb racecar Mazda RX-7 FD we did together with the owner few weeks ago.
Even when this is stricly race part, I followed same principles as for any other part - perfect weave pattern, no pinholes and of course vacuum infusion process. In the end we managed to fabricate very stiff and great looking full carbon dash with final weight of 1960g!
And this is just a start... for more content about his car follow
All of the future carbon content for this car will be also posted here😉

#

Adresa

Českobrodská 179
Praha
19011

Otevírací doba

Pondělí 09:00 - 21:00
Úterý 09:00 - 21:00
Středa 09:00 - 21:00
Čtvrtek 09:00 - 21:00
Pátek 09:00 - 21:00
Sobota 09:00 - 21:00
Neděle 09:00 - 21:00

Internetová stránka

Upozornění

Buďte informováni jako první, zašleme vám e-mail, když Gravity+ Composites zveřejní novinky a akce. Vaše emailová adresa nebude použita pro žádný jiný účel a kdykoliv se můžete odhlásit.

Kontaktujte Společnost

Pošlete zprávu Gravity+ Composites:

Odkazy

Sdílet