Handsonmetrology

Startseite
Deutschland
Braunschweig
Handsonmetrology

is the home of metrology.

18/06/2026

At Mitr Engineering in Bangkok, quality isn’t complicated. With ZEISS ScanPort, precision becomes repeatable, efficient and accessible across the shop floor.

Ready to take your 3D scanning workflow to the next level? Watch the full Maker Portrait 👉 https://www.handsonmetrology.com/video/mitr-engineering-reliable-industrial-parts-for-diverse-industries/

17/06/2026

Programming a new part for automated scanning takes time, and getting the path wrong means starting over. 🔄

ZEISS ScanCobot solves this with a guided workflow that simulates the complete scan path in software first. Collisions are detected before anything moves in the real world, so first-time setup is safe and predictable.

Learn more about ZEISS ScanCobot 👉 https://www.handsonmetrology.com/products/scancobot/

16/06/2026

Last call. The webinar is tomorrow. Join Sourabh Dhotre for a free hour on fringe projection, automated 3D scanning, and how to find the right setup for your quality control workflow.

📅 June 17, 2026
⏱️ 9:00 AM or 5:00 PM CEST.

💺Book your seat. 👉 https://www.handsonmetrology.com/webinar/streamlining-quality-control-from-manual-to-automated-3d-scanning/?utm_source=facebook_organic&utm_medium=event-post&utm_campaign=GL_IQS_WB_Jun26_6823_HOM-Manual-to-automated-3D-scanning

15/06/2026

The Autosurfacing app in ZEISS INSPECT creates a CAD model for you, directly from your scan data, in one click. 🧚 Freeform parts, castings, rotors for CFD analysis. No CAD software, no manual modeling, no hours lost.

Just your scan and the right app.
👉 https://www.handsonmetrology.com/products/software/apps/autosurfacing/

12/06/2026

One week left to register. Here's what you're signing up for.

Sourabh Dhotre takes you through the full fringe projection spectrum, from compact and flexible solutions to fully automated setups, and helps you figure out where your workflow sits on that scale.

📅 June 17, 2026 | 9:00 AM or 5:00 PM CEST

Register for free 👉 https://www.handsonmetrology.com/webinar/streamlining-quality-control-from-manual-to-automated-3d-scanning/?utm_source=facebook_organic&utm_medium=event-post&utm_campaign=GL_IQS_WB_Jun26_6823_HOM-Manual-to-automated-3D-scanning

11/06/2026

Bent tubes are everywhere in automotive and fluid systems. And they're surprisingly hard to get right. Material springback, tool wear, temperature: each variable shifts the result, and every failed bend is scrap. 💸

The Tube Check App in ZEISS INSPECT measures the full geometry in one scan, calculates correction values automatically, and exports them directly to the bending machine.

Sounds good? Learn more 👉 https://www.handsonmetrology.com/products/software/apps/

10/06/2026

The results of our recent poll are in. 74% of you struggle most with reflective and shiny surfaces when 3D scanning.

That gets easier when the software does the work for you. ZEISS INSPECT automatically adjusts exposure settings per scan position, so you capture clean data across the full surface, even where reflectivity is highest. Add a rotation table, and hotspots shift predictably as the part rotates for controlled coverage from every angle.

Want to see how it works in practice?
👉 https://www.handsonmetrology.com/video/how-to-3d-scan-different-materials/

09/06/2026

Hot take: the right 3D scanning setup depends entirely on your workflow. 🔥

ATOS Q comes in four configurations, from a precise manual scanner to fully automated inspection with ZEISS ScanCobot. Swipe through to see which one fits.

Find out more about ATOS Q 👉 https://www.handsonmetrology.com/products/atos-q/

08/06/2026

Formula Student teams have one shot to get their car right before competition. 🏎️

For Team Ljubljana, that meant verifying every detail of their racing chassis against the original design. Bonus Engineering supported the team in scanning the chassis with T-SCAN hawk 2, catching deviations before they ever reached the track.

Good luck in the competition guys! 🍀

05/06/2026

Most inspection systems come with a setup process. 😵‍💫 ZEISS ScanCobot doesn't. It arrives fully assembled, ZEISS INSPECT is already configured, and one power cable is all it takes to get started. Move it wherever you need it and you're ready to scan.

Learn more 👉 handsonmetrology.com/products/scancobot/

Adresse

Schmitzstraße 2
Braunschweig
38122

Webseite

https://www.handsonmetrology.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Handsonmetrology erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.