Kyocera Unimerco

Kyocera Unimerco It's not about the widest range of tools. It's giving you the one right tool that keeps you ahead.

When every cut matters, reliability matters even more.Meet the MA90 – a tangential 90° end mill engineered for stable ma...
13/07/2026

When every cut matters, reliability matters even more.

Meet the MA90 – a tangential 90° end mill engineered for stable machining, lower cutting forces, and longer tool life. Built to deliver confidence from the first pass to the last.

10/07/2026

How versatile is your machining process? How much can you achieve without a tool change?

We put it to the test! In our latest demo video, we showcase how our MA90 solution performs a wide variety of machining operations – face milling, shoulder milling, ramping, helical milling, pocketing, contouring, and plunging – all in one seamless process. The result?
✅ Maximum process security: Eliminate risks caused by frequent tool changes – keep your production running smoothly.
✅ Significant time savings: Fewer interruptions lead to improved efficiency.
✅ Top-level versatility: From steel to cast iron – one system designed for a wide range of applications.

Our success lies in the innovative insert design with MEGACOAT NANO EX coating technology (PR18 series) for extended tool life and superior performance.

25/06/2026

MagicDrill DRV in aluminium machining with coolant.
In this demonstration, coolant supports stable cutting conditions, reliable chip evacuation, and consistent machining performance. Especially in demanding aluminium applications, coolant helps maintain process security and efficiency.

We are also posting the same demo without coolant. Which of the two videos did you see first?

25/06/2026

MagicDrill DRV aluminium machining demo without coolant.
This coolant-free demonstration shows the tool under the same machining conditions, giving a clear comparison of the process. While the demo is performed without coolant, coolant is recommended for stable performance, efficient chip evacuation, and reliable results in production.

We are also posting the same demo with coolant. Which of the two videos did you see first?

A complete portfolio designed to help manufacturers improve productivity while selecting the most suitable solution for ...
29/05/2026

A complete portfolio designed to help manufacturers improve productivity while selecting the most suitable solution for their machining requirements.
The MFH Series covers a wide range of high-feed milling applications – from small diameter tools to large roughing cutters.

With the addition of the new MFH Harrier-D, the portfolio now offers an even more cost-efficient solution featuring an 8-edge, double-sided insert and a cutter design focused on stable machining and reduced vibration.

The series includes:

• MFH Micro (Ø8–16 mm)
• MFH Mini (Ø16–50 mm)
• MFH Harrier (Ø25–160 mm)
• MFH Harrier-D (Ø25–125 mm)
• MFH Boost (Ø22–80 mm)

Depending on the application, the MFH Series supports operations such as face milling, shouldering, slotting, pocketing, contouring and high-feed roughing.

https://f.mtr.cool/hykjwicaes

22/05/2026

Same workpiece. Same operation. Different result.
See the MFH Harrier-D go up against a conventional 45° face mill – and watch the difference the right tool makes.
8-edge, double-sided inserts. Low cutting forces. Stable machining without chatter.

https://f.mtr.cool/zobtvthxvk

19/05/2026

More cutting edges. Lower cost per part. Zero compromise on performance.
The MFH Harrier-D brings an 8-edge, double-sided insert design to the MFH Series – making high-feed milling more cost-efficient without giving up anything in process reliability.
In practice: up to 33% reduction in total cutting time for face milling, low cutting forces even at 250 mm overhang, and stable machining on small machining centres.
Watch the full video and find out more 👇
🌐 https://f.mtr.cool/irkhzwjqyb
📄 Brochure: https://f.mtr.cool/tejczbngjb

Struggling with stable finishing in hardened steels up to 70 HRC?The 2KMB solid ball nose end mill is developed for prec...
10/04/2026

Struggling with stable finishing in hardened steels up to 70 HRC?

The 2KMB solid ball nose end mill is developed for precisely these conditions. With its MEGACOAT HARD EX coating, it ensures high wear resistance and thermal stability during high-speed finishing.

https://f.mtr.cool/iatxcttrup

The S-shaped flute geometry reduces cutting resistance while maintaining smooth chip evacuation. Combined with high core rigidity, this results in improved vibration control and reliable surface integrity.

A consistent solution for mold and die machining where precision and process stability are critical.

Contact us to learn more!

07/04/2026

How do you ensure stable finishing in hardened materials without compromising tool life?

The 2KMB solid ball nose end mill is engineered for high-performance finishing in materials up to 70 HRC. Its MEGACOAT HARD EX coating provides excellent wear resistance and thermal stability under demanding cutting conditions.

An optimized S-shaped flute geometry reduces cutting forces and supports smooth chip evacuation, while the high core rigidity enhances process stability and minimizes vibration.

The result: consistent surface quality and reliable performance in mold and die machining.

Take a closer look at the cutting behavior in the video below.

20/03/2026

Gain full control over your cutting tools!
Complex tool portfolios require structured control.
Without real-time data, you risk stock discrepancies, overstocking, and production interruptions.
In this session, we explain how automated tracking and intelligent storage solutions turn complexity into competitive advantage.
Save your seat for 14 April.

Adresse

Hammfelddamm 6
Neuss
41460

Telefon

+4921318819115

Webseite

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Kyocera Unimerco erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an Kyocera Unimerco senden:

Verknüpfungen

Teilen

Kategorie