Wie sind die Öffnungszeiten?

Montag 08:00 - 16:00 Dienstag 08:00 - 16:00 Mittwoch 08:00 - 16:00 Donnerstag 08:00 - 16:00 Freitag 08:00 - 13:00

GeZu Impex GmbH

Name: GeZu Impex GmbH
Address: Zur Kisse 17, Sundern, 59846, DE
Telephone: +4929349617910
Price range: ££

Startseite
Deutschland
Sundern
GeZu Impex GmbH

GeZu Impex GmbH supplies premium construction and industrial components from system-free scaffolding accessories to high-performance fittings and hardware.

DIY-friendly, precise, and built to last. Explore quality you can trust. Die Firma GeZu Impex GmbH wurde im Jahre 2017 gegründet. Der Tätigkeitsschwerpunkt der GeZu Impex GmbH liegt auf dem Vertrieb von Gerüstzubehör und Holzbautechnik. Durch ein weltweit sehr gut ausgebautes Vertriebsnetz und der Teilübernahme der GeZu GmbH war es uns möglich, in kürzester Zeit den Produktvertrieb massiv zu erwei

tern. Um unseren Kunden ein maximales Produktangebot aus den Bereichen systemfreies Gerüstzubehör und Holzbautechnik anbieten zu können, haben wir uns bereits im Februar 2018 vergrößert und neue Räumlichkeiten in Sundern - Linnepe bezogen. So sind wir in der Lage auch mit sehr kurzen Lieferzeiten, die Erwartungen unserer Kunden zu erfüllen. Bei unseren europaweiten Kunden haben wir uns einen guten Ruf erarbeitet und führen aktuell über 250 Produkte im Bereich des Gerüstzubehörs und über 200 Produkte in der Holzbautechnik. Aufgrund dieses breiten Produktsortiments kommen unsere Kunden aus verschiedenen gewerblichen Bereichen sowie Privatkunden. Zu unserem Kundenstamm zählen u.a. Gerüstbauer, Bedachungsunternehmen, Zimmereien, Veranstaltungstechniker und Betriebe aus dem Bereich des Bootstrailer Baus. Nicht zuletzt durch das sehr große Engagement unserer Mitarbeiter ist es uns gelungen, europaweit eine Vielzahl zufriedener Kunden zu gewinnen. Zufriedene Kunden bleibt unser tägliches Ziel. Um besser und gezielter auf Kundenanforderungen reagieren zu können, erweitern und verbessern wir stetig unser Vertriebssortiment.

29/08/2026

A gate only swings as true as the posts holding it — and a heavy timber gate needs a serious base. Set each post on a galvanised anchor over a deep concrete footing and even a solid hardwood gate stays square and swings clean for years — no sag, no scrape, no annual re-hang. Hot-dip galvanised at 55 µm so the footing outlasts the timber above it. A strong gate starts below. Which entrance needs this? 🔩

27/08/2026

A scaffold is only as safe as its ties to the building. Heavy-duty galvanised anchor holders lock the lift firmly back to the facade, giving a strong, code-minded fixing point that keeps the whole structure stable through wind and work — no sway, no movement, no risk. Hot-dip galvanised at 55 µm to hold through years of rain and reuse without rusting out. Secure every scaffold connection. Tag a scaffolder who never cuts a corner. 🏗️

25/08/2026

Snapped or rotten fence post? You don't need to replace the whole thing. Skip pulling out the old post and digging out its footing — bed a galvanised repair spike into a fresh concrete block, hold it plumb and let it cure. Then seat the post in the socket, screw it tight, and the fence is solid again — straight, secure, and sorted in an afternoon. One post, one fix, no full rebuild. Swipe for the how, and save it for the next storm. 🔩

23/08/2026

Nowhere to build a carport? You don't need to dig.
Bolt-down bases fix straight to your existing driveway, hold each post rock-solid, and keep the timber off the ground. Add connector brackets and you've got a full covered carport in a weekend. Base first — the rest follows.

22/08/2026

A whole deck, zero digging and not a bag of concrete in sight. Ground screws wind straight into the soil with an impact wrench and give a solid, level footing in minutes — no dug holes, no mixing, no waiting for it to cure, and barely any mess left in the garden. Hot-dip galvanised at 55 µm, so the foundation outlasts the build on top of it. Fast foundations, zero concrete. What would you put on yours? 🔩

20/08/2026

A privacy fence this clean stays straight because of what's under the ground. Bent-rod U holders lock each post firmly into its concrete footing, so a tall screen stands dead straight and solid through wind and weather — no lean, no sag, no gaps opening up over the years. Hot-dip galvanised at 55 µm to outlast the timber above it. Perfect for privacy and screen fences. Get the base right and the whole run just holds. Where would yours go? 🔩

18/08/2026

Right-angle, swivel or half — every scaffold connection, explained. The right-angle coupler locks two tubes dead square: the 90° workhorse and the backbone of every lift. The swivel takes any angle, so you can brace diagonals, corners and awkward geometry. The half coupler ties a tube back to a fitting or facade anchor, securing the whole lift to the build. Three essential fittings for square joints, angled braces and safe facade fixing — hot-dip galvanised to hold through years of rain and reuse. Swipe to see each one, and save it for the crew. 🔩

15/08/2026

The one part of a fence everyone forgets — until it rots. Bare post tops drink in every rainfall and rot from the top down, taking the whole post with them. A galvanised post cap sheds the water, protects the end grain, and finishes the run with a crisp, considered look that lasts. Hot-dip galvanised at 55 µm to shrug off the weather for years. The perfect finishing touch — and the cheapest upgrade a fence can get. Which posts are still bare? 🔩

13/08/2026

A fixed base plate can't sit flat on a slope — and an uneven footing is a dangerous one. The swivel base jack solves both: the base plate pivots to match the ground angle and bolts down solid, while the adjustable screw dials the height so every standard stays dead plumb. Result — a whole lift standing square and safe, even on a steep bank. Sort the base and the rest follows. Tag a scaffolder who runs a tidy, safe site. 🏗️

11/08/2026

The secret to a fence post that never wobbles? It's all in the base. Seat the galvanised U-anchor in the hole before you pour, drop in the concrete and brace the post dead plumb, then let it cure and bolt the post down. The anchor holds the timber solid, elevated and clear of ground moisture — so the whole run stays straight and rot-free for decades, not seasons. Hot-dip galvanised at 55 µm to outlast the post it holds. Set it once, set it right. Swipe for the steps, and save it for the weekend. 🔩

Adresse

Zur Kisse 17
Sundern
59846

Öffnungszeiten

Montag	08:00 - 16:00
Dienstag	08:00 - 16:00
Mittwoch	08:00 - 16:00
Donnerstag	08:00 - 16:00
Freitag	08:00 - 13:00

Telefon

+4929349617910

Webseite

http://www.gezu-impex.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von GeZu Impex GmbH erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.