Menred Ess

13/04/2026

31/01/2026

3 × Menred ESS LFP.1433.F (14.33kWh each, 42.99kWh total)
2 × SRNE hybrid inverters
• 51.2V system, 140A max per unit
• Compatible with 8000W inverters
• UN38.3/MSDS certified
• >6000 cycles at 0.5C & 25°C (80% DoD)
• CAN / RS485 communication
• LCD touchscreen: manual selection of 27+ inverter protocols
• Wi-Fi & Bluetooth monitoring via mobile app
• Floor-mounted, IP21, operating temp: –10°C to +50°C
• Scalable up to 16 units (229.29kWh)

27/12/2025

A real-world power battery setup:
1 × Menred ESS LFP.6144.W (6.144kWh)
Connected to one SRNE hybrid inverter

• 51.2V, 120A max current, supports 6000W inverters
• UN38.3/MSDS certified
• >6000 cycles at 0.5C & 25°C (80% DoD)
• CAN / RS485 communication
• LCD touchscreen: manual selection of 27+ inverter protocols
• Wi-Fi monitoring via mobile app
• Wall-mount design: 514 × 332 × 230 mm, 32 kg
• Scalable to 16 units (98.24kWh)

24/12/2025

A real-world solar battery setup:
1 × Menred ESS LFP.1433.F (14.33kWh)
Connected in parallel to one Deye hybrid inverter

• 51.2V, compatible with inverters up to 8000W
• Cobalt-free LiFePO₄ cells, UN38.3/MSDS certified
• >6000 cycles at 0.5C & 25°C (80% DoD)
• CAN / RS485 communication
• LCD touchscreen: manual selection of 27+ inverter protocols
• Wi-Fi & Bluetooth monitoring via mobile app
• Floor installation, IP21
• Operating temp: discharge -10°C to +50°C, charge 0°C to +50°C
• Scalable to 16 units (229.29kWh)

20/12/2025

A real-world lithium battery setup:
1 × Menred ESS LFP.6144.G2 (12.28kWh total, 2 × 6.144kWh modules)
1 × G2 centralized control box
Connected to one Deye hybrid inverter
300A max current, compatible with 15kW inverters
≥6,000 cycles at 95% DoD
LCD touchscreen — manual selection of 27 inverter protocols
Wi-Fi & Bluetooth monitoring
Scalable to 4 units (49.12kWh)

10/12/2025

A real-world lithium battery setup:
1 × Menred ESS LFP.6144.W (6.144kWh)
Connected to one SRNE hybrid inverter
51.2V nominal, 120A max current, supports up to 6000W inverters
TÜV-certified (IEC 62619:2022, UN38.3)

6,000 cycles at 80% DoD
Wi-Fi monitoring + touchscreen protocol selection (27 options)
Scalable to 16 units (98.24kWh)
Compact wall-mount design: 514 × 332 × 230 mm, 32 kg

03/12/2025

A residential solar energy system integrates one Menred ESS LFP.1433.F unit, rated at 14.33kWh, paired directly with one SRNE hybrid inverter. This 1:1 architecture simplifies system design and reduces potential points of failure, making it suitable for homes seeking straightforward energy storage without complex wiring or control layers.

22/11/2025

A homeowner recently installed a compact yet fully certified energy storage battery system:
✅ 2 × Menred ESS LFP.6144.W (6.144kWh each)
✅ Parallel connection to one hybrid inverter

This 12.29kWh system delivers reliable evening power and short-term backup for essential loads.
With 120A max current per unit, support for 6000W inverters, and >6,000 cycles at 80% DoD.
Inverter protocol selection is handled directly on the touchscreen — 27 options, no extra hardware needed.
TÜV-certified to IEC 62619:2022 and UN38.3/MSDS standards.

And when energy needs grow? Up to 16 units can be connected in parallel — scaling to 98.24kWh.

Practical. Certified. Energy storage, engineered for real homes.

19/11/2025

A real-world lifepo battery system:
2 × Menred ESS LFP.1433.F (14.33kWh each)
Parallel connection to one Deye hybrid inverter
Total capacity: 28.66kWh
51.2V nominal, 280A max output
Over 6,000 cycles at 80% DoD
Wi-Fi monitoring and touchscreen interface
Scalable up to 16 units (229.29kWh)