Hvad er åbningstiderne?

Mandag 08:00 - 16:00 Tirsdag 08:00 - 16:00 Onsdag 08:00 - 16:00 Torsdag 08:00 - 16:00 Fredag 08:00 - 15:30

Euro Machinery APS

Name: Euro Machinery APS
Address: Højmarken 18, Vissenbjerg, 5492, DK
Telephone: +45 63130707

Hjem
Danmark
Vissenbjerg
Euro Machinery APS

Ring Rutevejledning Website Kontakt virksomheden

Euro Machinery APS is your Top choice for buying & selling new & used machinery for recycling and fl Looking to buy or sell?

Euro Machinery APS is a global player, who trades with new and used machinery for flexible plastic converting. We are specialists in trading with second hand machines and equipment for flexible converting. Our aim is to be your no. 1 choice when wanting machines to satisfy your needs and increase your production, as well as when wanting to convert surplus machines into different assets. Why let your surplus machines collect dust in the corner when we can help you find new homes for them? We have extensive knowledge about flexible converting and the plastic industry and have been in the market for more than 25 years. We have an extensive network, which ensures an even faster and more efficient process for you - no matter whether you are looking to buy or sell! We trade in used machines such as:
- BAG MAKING MACHINES
- BLOWN FILM EXTRUDERS
- FLEXO PRINTERS CI & STACK
- LAMINATING & COATING MACHINES
- RECYCLING MACHINES
- WINDERS & SLITTERS
- ACCESSORIES FOR CONVERTING
- SHEET EXTRUSION & THERMOFORMING

For new machines we represent the following companies:

- PURELOOP, a special branch of the EREMA Group that focus on the recycling of clean production waste using shredding and extrusion technology, in Denmark and Sweden.

- Hudson-Sharp plastic bag making machinery, pouch making equipment and reclosable packaging solutions in Denmark and Sweden.

- HOSOKAWA ALPINE Blown film lines and accessories in Denmark and Sweden.

- ASHE Converting Equipment in Denmark, Norway, Sweden, Finland, Faroe Islands, Iceland, Estonia, Lithuania, Latvia, Poland, Russia, Ukraine, Belarus. Then you have come to the right place! At Euro Machinery we will take good care of you and your machines. We will do the hard work so you can focus on what is really important - maximizing your production!

30/10/2026

What’s the scariest sound on the production floor? 🎃

(Hint: it’s not ghosts.)

Silence. 👻

No humming, no whirring, no rhythm of machines doing their thing. Just an eerie quiet that sends shivers down every production manager’s spine. 😱

This Halloween, we wish you plenty of treats, no tricks, and machines that keep on running.

Happy Halloween from all of us at Euro Machinery! 🎃

27/10/2026

Most of the world’s recycled PET stopped counting in Europe this summer.
Not stopped being legal. Stopped counting.

Since 23 July, only rPET collected, sorted and recycled inside the EU counts toward the 25% target for single-use PET bottles. You can still buy imported material. It just doesn’t count.

That changes on 21 November 2027.

Which leaves about 13 months.

Europe needs 1.7 million tonnes of rPET a year by 2030. Four PET plants closed in the last two years.

New lines don’t arrive in 13 months. Used ones do.

Does this pull capacity back into Europe, or just move the cost onto bottlers?

22/10/2026

European machinery builders are having a flat year.

If you are buying used, that is good news.

The VDMA expects German plastics and rubber machinery revenues to finish 2026 roughly level, with first quarter order intake down 5% in real terms. On the recycling side, OPIS reports postponed expansions and continued capacity rationalisation across Europe.

Here is what that actually means on the ground.

Consolidation puts genuinely good machines onto the second-hand market. Not tired assets at the end of their working life, but properly maintained lines from well-run European plants that closed or restructured. Meanwhile sellers negotiate more willingly than they did three years ago.

So availability in 2026 looks better than it has in several years.

The catch is that the good ones move quickly, and a flat market still rewards patience over panic. We put together a guide on how to judge the timing, what to inspect, and which categories currently hold their value.

20/10/2026

Your production line still runs. That doesn’t mean it’s still performing.

Unplanned downtime rarely comes out of nowhere. It builds up quietly: outdated safety components, spare parts that are no longer available, rising energy costs and slowly declining output.

Replacing the whole line is rarely the answer. A targeted retrofit often is.

As Hosokawa Alpine’s official partner in Denmark and Sweden, we can now offer a free initial inspection through Alpine’s BLUESERV Retrofit service:

→ Alpine’s specialists assess your system on site

→ You get clear, practical recommendations and prioritised next steps

→ No obligation. You decide what happens next.

And it’s not only for Alpine lines: equipment from other manufacturers can be inspected too.

Swipe through the carousel to see how it works.

Get in contact with us to learn more: [email protected] · +45 6313 0707

12/10/2026

Sometimes, a phone call is all it takes.

Selling secondhand industrial machines this size can come with some... challenges, to say the least.

The Vecoplan shredder we listed this month weighs 27 tonnes. The HSM baler setup is nearly 23 metres long. And the buyer who needs exactly that machine, at that capacity, is often in another country and has no idea it's for sale.

Luckily, this is where we come in! Finding the right buyer. Arranging inspections. Dismantling, loading and getting equipment safely across borders.

After 25 years, we've seen and done pretty much everything (though we always welcome a new challenge). Whether you're buying or selling, we're ready to help.

If you're replacing a line, closing a site, or have equipment sitting idle, get in touch. The earlier we hear about it, the better the match we can find.

We make plenty of calls ourselves. But you're always welcome to make the first one. 📞

07/10/2026

Busy month!

Our sales team have been out working the phones, and it paid off.

An HSM VK8818 channel baler with the Stadler conveyor, 880 kN, and it comes with its full service history.
A Vecoplan VAZ 2000 shredder: 27 tonnes, 155 kW, eats 5 to 10 tonnes an hour. A complete EREMA RGA 160 TVE PET line running up to 1,000 kg/h. A Roll-o-Matic Compact 860I doing 230 bags a minute.
And a PSA AR 2000 slitter, 2 metres wide at 350 m/min, still running in production so you can watch it work before you buy it.

Swipe through for the specs 👉

The baler, the shredder and the EREMA would line up as a sequence if someone wanted the whole front end at once. They came from three separate sources, so it just worked out that way.

New equipment joins the list most weeks. If you're looking for something specific, tell us what and at what capacity.

01/10/2026

PPWR is phased across five dates between 2025 and 2030. Easy to lose track of.

So we mapped the whole thing. What's live now, what lands later, and the two requirements most often mixed up.

One for anyone in recycling: enforcement capacity varies by member state, so your first PPWR conversation probably won't be with a regulator. It'll be with a customer asking for evidence.

Full guide and current stock in the comments.

28/09/2026

Need more shredding capacity without waiting for a new build?

We've just taken in this WEIMA WLP 1500 single-shaft shredder with pusher.

It's in excellent working condition and practically as new.

Built for bales of rigid plastics and plastic film:

▪ Up to 4 t/h, depending on material and feed rate

▪ 200 kW motor

▪ 1500 × 800 mm rotor with 52 octagonal knives

▪ 60 mm screen and 1500 × 925 mm hopper inlet

▪ Feeding and discharge conveyors, electrical cabinet and air cooling included

We have one unit only, and it's subject to prior sale.

See photos and full specs, and request a price → Link her

Ref.: 66122

23/09/2026

Belinda and Carlos have been hard at work getting ready for the AMI Compounding and Recycling Expo, and the final preparations are done.

Booth C-504 is set up and the team is ready.

Find us in Frankfurt on 23 and 24 September. Whether you are looking for your next machine or have equipment to sell, come by and have a chat.

🎟️ Register for FREE: https://lnkd.in/gWvNBgVT

.

.

.

21/09/2026

Right now Belinda and Carlos are somewhere on the A7 with a car full of exhibition equipment.

Roughly 800 km from the office in Vissenbjerg to a stand in Frankfurt, and not one machine among the cargo.

They're heading to the AMI Compounding & Recycling Expo, 23–24 September, stand C504.

Where they'll spend two days talking about everything from recycling lines to granulators to who has the best coffee at the fair!

Come and say hello.

🎟️ Register for FREE: https://www.ami-events.com/8ARXxA?utm_source=Exhibitor&utm_campaign=26_CRE_EU&utm_medium=Social_Media&RefId=Exhibitor-Social-CRE

Adresse

Højmarken 18
Vissenbjerg
5492

Åbningstider

Mandag	08:00 - 16:00
Tirsdag	08:00 - 16:00
Onsdag	08:00 - 16:00
Torsdag	08:00 - 16:00
Fredag	08:00 - 15:30

Telefon

+45 63130707

Website

http://www.euro-machinery.com/

Underretninger

Bliv den første, der får besked: Vi sender dig en e-mail, når Euro Machinery APS offentliggør nyheder og tilbud. Din e-mailadresse bliver ikke brugt til andre formål, og du kan til enhver tid afmelde dig.