Pionners for polymers

02/12/2025

24/11/2025

Product Data Sheet
Pox Fix Adhesive PF
Description:

Pox Fix Adhesive PF is a rapid set epoxy adhesive which sets for small or emergency repairs.
Specification:
Comp . A Comp . B
Consistency: Thixotropic paste Thixotropic paste
Color: White White or Black
Flash point: > 100°C > 100°C
Solids content 100 % 100 %

Typical mix properties:

Mixing ratio: 1 Part A to 1 Part B by volume
Mixing: Mix until uniform in colour
Working life at 23°C: 2-3 minutes
Minimum application Temp.: 10°C
Minimum cure time: 1-2 hour at 23°C
Full cure time: 2-3 hours at 23°C
Shore D > 80

Advantages:

 Easy mix 1:1 mix ratio and workable
 Non sag on vertical surfaces
 Smooth creamy texture
 Sets in 2-3 minutes at 23°C
 High tensile and compressive strengths
 Very good chemical resistance
 Will not discolour white or light coloured marble if mixed Fix Pox Adhesive PF properly
Applications:
Pox Fix Adhesive PF is used in on the spot emergency repairs to - Concrete structures - Machinery - Potable water tanks - Stone - Concrete floors - Concrete pipes - Ceramic - Concrete stairs - Fiberglass - Grouting bolts - Wood - Brick & etc.
Storage:
It is at least 24 months at room temperature in the original sealed containers form the date of
manufacture. Store away from excessive heat and humidity in tightly closed containers.
Handling Precautions:
Please refer to the Safety Data Sheet of this product. Classification: C "corrosive"