Tempcon Instrumentation Ltd

Tempcon Instrumentation Ltd Measure with Confidence. Monitoring, Control, and Data Logging solutions for all industries.

Tempcon Instrumentation Ltd was established in 1980 and specialises in instrumentation and sensors (probes) for Measurement, Control and Data Logging of temperature, humidity, pressure, voltage, current, energy (kWhs), wind speed/direction, soil temperature, and most environmental conditions. We offer a huge range of Data Loggers, Energy Loggers, Weather Stations, Thermocouples, RTD, PT100 Probes,

Chart Recorders, Digital Thermometers, Process Controllers, Signal Conditioners, Panel Indicators and Thermistor Probes for use in environmental monitoring, manufacturing, food processing, logistics, and University research projects. We manufacture: Thermocouple, Thermistor, and Platinum Resistance RTD, PT100, PT1000, temperature sensors and probes in any quantity. We provide repair and calibration using equipment calibrated and traceable to UKAS. Our own Quality System is accredited to BS EN 9001:2015 by National Quality Audits. Tempcon Instrumentation offers application advice, and instrumentation sensor solutions to suit any application - whether you need a hand-held or a fixed industrial, research, or field installation. Our ablity to provide the complete Measurement, Control, or Data Logging solution is backed up by over 40 years of consistent practical experience. We are Official Distributors (and offer service & calibration) for:

Onset Temperature, RH, Voltage, Current, Energy, & Weather Station Data Loggers. Digitron: Temperature & Humidity Instrumentation
Action Instruments: Signal Conditioners
Eurotherm: Chart Recorders & Process Controllers
Dyzle: Cold Chain specialists
Ametek/Jofra: Dry Block Calibrators
Dickson: Chart Recorders & Data Loggers
DataTrack Process Instruments: Panel Indicators & Signal Conditioners
Grant Instruments: Squirrel Data Loggers
Jules Richard Instruments: Chart Recorders
West Instruments: Temperature & Process Controllers
Status Instruments: Signal Conditioners & Transmitters

Two instruments measuring the same environment should produce consistent results.If readings begin to drift apart, calib...
04/09/2026

Two instruments measuring the same environment should produce consistent results.

If readings begin to drift apart, calibration could be the reason.

Routine calibration helps maintain confidence in your measurements, supports quality assurance, and ensures compliance where traceable data is required.

Reliable decisions begin with reliable measurements.

Learn more through the link in our bio.

Extreme temperatures, moisture, vibration, and dust can all affect the performance of monitoring equipment.Selecting ins...
02/09/2026

Extreme temperatures, moisture, vibration, and dust can all affect the performance of monitoring equipment.

Selecting instruments that match the conditions they'll operate in helps improve reliability, reduce maintenance, and extend service life.

Understanding the environment is just as important as understanding the specification sheet.

Find more practical guidance through the link in our bio.

Collecting more data isn't always better.A sampling interval that's too frequent can shorten battery life and create unn...
01/09/2026

Collecting more data isn't always better.

A sampling interval that's too frequent can shorten battery life and create unnecessarily large datasets. Too slow, and important events could be missed altogether.

The ideal logging interval depends on your application, the process you're monitoring, and the level of detail you actually need.

Choosing the right settings from the start saves time when it comes to analysing results.

Learn more through the link in our bio.

Choosing the right sensor is only part of the process. How it's installed can have just as much impact on the quality of...
31/08/2026

Choosing the right sensor is only part of the process. How it's installed can have just as much impact on the quality of your data.

Poor placement, incorrect mounting, or environmental interference can all introduce measurement errors that affect decision making later.

Taking the time to review installation requirements before deployment helps you get the reliable results your project depends on.

Learn more about selecting and using sensors with confidence through the link in our bio.

Reliable measurements give engineers the confidence to act.Whether you're improving a manufacturing process, validating ...
29/08/2026

Reliable measurements give engineers the confidence to act.

Whether you're improving a manufacturing process, validating environmental conditions, or protecting sensitive products, dependable data helps reduce uncertainty and supports informed decisions.

Investing in the right monitoring equipment isn't just about collecting numbers. It's about making better decisions every day.

Learn more through the link in our bio.

Even the most advanced data logger relies on the quality of the probe connected to it.Factors such as response time, mea...
28/08/2026

Even the most advanced data logger relies on the quality of the probe connected to it.

Factors such as response time, measurement range, durability, and compatibility all influence overall system performance.

Choosing the correct probe for your environment helps ensure accurate and dependable measurements from day one.

Find more guidance through the link in our bio.

Collecting measurements is only one part of effective monitoring.Clear reports, organised data, meaningful trends, and a...
27/08/2026

Collecting measurements is only one part of effective monitoring.

Clear reports, organised data, meaningful trends, and accessible records allow engineers and decision makers to identify issues faster and take action with confidence.

The best monitoring systems don't just gather information. They help you understand it.

Learn more through the link in our bio.

When specifying monitoring equipment, it's worth considering future expansion.Will additional sensors be needed?Could mo...
26/08/2026

When specifying monitoring equipment, it's worth considering future expansion.

Will additional sensors be needed?

Could monitoring locations increase?

Will remote access become important later?

Planning for future growth now can help avoid unnecessary upgrades and replacements down the line.

Explore practical monitoring solutions through the link in our bio.

A difference of just a few degrees or a small variation in humidity may seem insignificant.Over time, those small inaccu...
25/08/2026

A difference of just a few degrees or a small variation in humidity may seem insignificant.

Over time, those small inaccuracies can affect product quality, research outcomes, equipment performance, and compliance requirements.

Choosing reliable instrumentation from the beginning helps minimise uncertainty throughout your project.

Learn more through the link in our bio.

Both have their place, and the right choice depends on your application.Wireless systems offer flexibility and easier in...
24/08/2026

Both have their place, and the right choice depends on your application.

Wireless systems offer flexibility and easier installation, especially in difficult to access locations.

Wired systems can provide continuous communication, stable connections, and are often preferred in permanent installations.

Understanding the strengths of each approach helps you build a monitoring system that fits your operational needs.

Learn more through the link in our bio.

Address

Ford Lane Business Park
Arundel
BN180UZ

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 4:30pm

Telephone

+441243558270

Website

Alerts

Be the first to know and let us send you an email when Tempcon Instrumentation Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share