Impractical Machinist

Directions Website Contact the business

Impractical Machinist From my Hertfordshire workshop I make and sell hand scrapers, and carbide inserts of varying sizes.

That’s one way to get rid of the stack of offcuts. I might still add more but i ran out of screws that aren’t either too...
02/11/2026

That’s one way to get rid of the stack of offcuts. I might still add more but i ran out of screws that aren’t either too short or way too long, and it’s late so securing the anvil will have to wait.

After ten years or so the record and woden vices are finally off the shelf and on a bench. I haven’t bolted them down th...
24/10/2026

After ten years or so the record and woden vices are finally off the shelf and on a bench. I haven’t bolted them down though, baby steps and all that.

There’s a pin that holds the records screw in place that had sheared and replacing it has been a bit of a job since the hole was somehow drilled bent the new pin made it about three quarters of the way through so i’m calling it good and if it breaks again i’ll just turn another one.

On the woden the jaws are pretty chewed up and one is missing a screw which is definitely going to be an imperial thread i don’t have lying around, but it hasn’t fallen off yet so that can wait.

When the weather cheers up a bit i might get these two outside for the wire wool treatment and some new enamel but they’ll do for now.

I need to work on my wood turning, and so i present yesterdays performance art titled “practice makes expletives” and to...
22/10/2026

I need to work on my wood turning, and so i present yesterdays performance art titled “practice makes expletives” and todays which i’ve called “if you’re brave enough”.

For a long time i’ve been aware that my technique isn’t great and i make far too many mistakes resulting in a lot of waste and now i’m taking the time to improve.

I’ve made something un the workshop for the first time in ages, it’s a coffee tamper. Tomorrow my new coffee machine is ...
13/10/2026

I’ve made something un the workshop for the first time in ages, it’s a coffee tamper. Tomorrow my new coffee machine is arriving and the one thing i don’t have is a tamper, but i do have a lathe (two lathes) and a workshop full of offcuts and leftovers.

The beech cap is because i didn’t do the roundover on the end of the handle before i parted off, which has convinced me to buy a chuck for the wood lathe.

Todays bread came out alright.
16/07/2026

Todays bread came out alright.

That’s not a bad test! I’m working my way through preparing all the gcode for the various operations to make my scrapers...
28/04/2026

That’s not a bad test! I’m working my way through preparing all the gcode for the various operations to make my scrapers. It still wont be just pushing a button though, there will still be deburring and clean up work to do, and my handles are still turned by hand.

I’m selling my induma milling machine, as sad as it is to see it go i’ve bought the cnc mill and the workshop has shrunk...
22/04/2026

I’m selling my induma milling machine, as sad as it is to see it go i’ve bought the cnc mill and the workshop has shrunk so i need the space.

Generally in good working order it’s served me quite well over the years, comes fitted with a vfd, dro and this is also the long bed option. Induma built these mills pretty solidly and this one weighs about 1300kg.

Supplied with a clarkson autolock chuck and a bt30 er32 chuck. There are a couple of vices and a rotary table also potentially for sale.

I haven’t got my crane at the moment so the buyer will need to dismantle and move the machine though i’m happy to lend a hand.

I’ve finally replaced my iphone 11 pro with a new 17 and i’ve come to sunny west drayton to try out the new camera!
18/04/2026

I’ve finally replaced my iphone 11 pro with a new 17 and i’ve come to sunny west drayton to try out the new camera!

Happy 10th anniversary to my gorgeous fiancée  the kindest, most caring, patient, thoughtful, and beautiful woman in the...
22/03/2026

Happy 10th anniversary to my gorgeous fiancée the kindest, most caring, patient, thoughtful, and beautiful woman in the whole world, i love you more every day!

From the first night we met i couldn’t have imagined that we would have ten years of adventures together and i can’t wait to see what the next decade brings us!

Oh ffs. I restarted the mill and didn’t reset the coordinate mode to relative before telling the x axis to move.  **up  ...
18/02/2026

Oh ffs. I restarted the mill and didn’t reset the coordinate mode to relative before telling the x axis to move.

**up

Address

Borehamwood

Alerts

Be the first to know and let us send you an email when Impractical Machinist posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Impractical Machinist:

Shortcuts

Share