Manutech Europe Ltd

04/06/2026

SCT-3000 Split-Core 3″ Current Transformer £71.00
Shop now: https://www.manutecheurope.com/.../sct-3000-split-core.../
The SCT-3000 Split-Core Current Transformer series of split core current sensors are ac current sensors with 4-20 ma output manufactured by Magnelab. The current transformer design for these current transformers is such that they can convert an AC input current of up to 3,000 amperes into an output of 0.333 volt. Specifically, the SCT-3000 has a variety of options for amperage rating, with the largest being 3000 amperes.
Features
Output 0.333 Volt AC
Accuracy at 10% to 130% of rated current
Operates from 50 Hz to 400 Hz
Linearity accuracy ± 1%
Phase angle < 2 degrees measured at 50% rated current
8 ft. twisted-pair lead
UL recognized
Custom output and other parameters are available

15% OFF - SCT-3000 Split-Core Current Transformer - 3" AC Current Sensor available at Manutech Europe. Shop now for the SCT-3000 at the best price. View our current sensor range!

04/06/2026

CPM-20 Multifunction Power Meter
Shop now: https://powermeters-analysers.co.uk/.../cpm-20.../
CPM-20 multifunction power meter with high accuracy measurement for single phase and three-phase system. Measuring parameters for voltage, current, active/reactive/apparent power and energy, power factor, and frequency etc.. Standard with RS-485 Modbus RTU communication port, front LCD display with buttons for programming. It can display the accumulated CO2 emission for power monitoring and management.
Features
■ With reliability simulation test report of MTBF over 60,000 hours.
■ Auto wiring change (Note) via software.
■ High brightness display. Able to perform even in direct sunlight.
■ RS485 Modbus RTU, the highest baud rate can reach 115200bps; data error rate below 1%
■ FCC, CE certified
Applications
■ Energy monitor of motor control panel / distribution board
■ Energy management / electric cost allocation
■ Intelligent power panel
■ Community power monitoring
■ Intelligent green building

£180 Order via Phone or Email: Phone: 01691 770 484 Email: [email protected] Open: 10am-4pm

04/06/2026

UCT-0300 Solid-Core AC Current Sensor £22.00
Shop now: https://www.manutecheurope.com/.../uct-0300-solid-core.../
UCT-0300 Solid-Core AC Current Sensor
Magnelab UCT-0300 Solid-Core AC Current Sensor Series have better than one percent accuracy and less than one degree phase angle. Output is controlled by a precision resistor fixed at the industry standard of 0.333 Volt AC. The rugged epoxy encapsulated construction comes with eight feet twisted leads. The Magnelab UCT Current Sensor series are better than one percent accuracy and less than one degree phase angle. Output is controlled by a precision resistor fixed at the industry standard of 0.333 Volt AC. The rugged epoxy encapsulated construction comes with eight feet twisted leads. See less

UCT-0300 Solid-Core AC Current Sensor Available at Manutech Europe. Shop now for a Solid-Core AC Current Sensor UCT-0300.

21/05/2026

VIPS 100308510 Current Transformer

Shop now: https://www.manutecheurope.com/product/vips-100308510-current-transformer/

VIPS 100308510

Features:
ABS plastic moulding
Apertures accepting a wide range of bus bar
CTs are ultrasonically welded and unbreakable

Advantages:
Easy bus bar mounting
Highly cost effective
Compact in size

Applications:
Switchgear
Distribution system
Generator sets

Control Panels
Control Devices
Overload protection

18/05/2026

CCT-1200 AC Current Output Transformer £19.00
Shop now: https://www.manutecheurope.com/.../cct-1200-ac-current.../
The Magnelab CCT-1200 AC Current Output Transformer has been designed to transform an input current of between 100A and 600A to an output of just 5A. The materials used in the current sensor are all classed as class B and are fully UL recognized. They have also passed the hi-pot test at 4,000V RMS. It has been designed to operate within the 50Hz to 400Hz frequency range. The rated load is 5VA and it has full CE marking. It is also compliant with RoHS.

CCT-1200 AC Current Output Transformer available at Manutech Europe. Shop now for the CCT-1200 AC Current Output Transformer

06/05/2026

HCT-0024 DC Current Sensor 4V DC Output £86.00
Shop now: https://www.manutecheurope.com/.../hct-0024-dc-current.../
HCT-0024 DC Current Sensor 4V DC Output
The HCT-0024 (previously MAG-J24H004) is a DC current transducer that uses the Hall Effect principle to sense 200 to 250A DC current and output 4 Vdc.
The HCT-0024 uses accurate laminating core split technology and is designed for strong durability while providing accuracy in low current situations.
The HCT-0024 is a compact one-touch split structure, allowing easy installation. It is accurate and passes IEC61010-1, UL61010-1, and EN61010-1.

Buy HCT-0024 DC current sensor with 4V DC output uses accurate laminating core split technology designed for durability while providing accuracy in low current

27/04/2026

High Frequency Current Transformer (HFCT)
Shop now: https://www.manutecheurope.com/.../hfct-high-frequency.../
Frequency Response up to 500 MHz – Measurement range up to 20kA
The Magnelab High Frequency Current Transformer – designed to provide a very accurate, non contact, non destructive measurement of either a single or a repetitive bipolar or unipolar pulse. Furthermore, it contains a solid toroid core and will measure input ranges of 200 to 20,000 amps DC or 2 to 71 amps AC. It comes with opening sizes from 1/4 to 2 inches. In addition, it’s voltage output ranges from 0.025 to 5.0 V/A. It also works for the continuous wave.
Broad Frequency Response
The AC current sensors in this series measures current from just microamperes up to 20,000 amperes. These are broad frequency response CTs that can operate from just 0.5 Hz to 500 MHz. The devices come in five different case sizes and you will choose between an SMA or a BNC connector type.
Another high accuracy CT is the HT-300M Hall effect current transducer. This has a fast response and provided with a 3 kV proof stress. Unlike the HFCT, which measures AC current, the HT-300M measures DC current of up to 300 amperes.
High Sensitivity
The HFCT has a very high frequency cutoff, which ensures that fast transients can be faithfully rendered. Additionally, it has an operating temperature of between minus 20 degrees Celsius and plus 120 degrees Celsius. Its nominal accuracy is also much better, standing at 0.5% that is spread over a wider bandwidth. The Magnelab HFCT is also as much as five times more sensitive to signal measurement at low intensity. Applications for the HFCT include electromagnetic interference research, power system harmonics and transients, laser and plasma research, corona wire discharge, semiconductor gate switching, and partial discharge measurement.
Features
Higher frequency cutoff, assuring faithful rendering of fast transients
Up to five times more sensitive for low intensity signal measurement
Operation temperature -20 degree C to plus 120 degree C
Higher nominal accuracy ±0.5% over a wider bandwidth

The Magnelab HFCT High Frequency Current Transformer – designed to provide a very accurate, non contact, non destructive measurement of either a single or a repetitive bipolar or unipolar pulse.

21/04/2026

5% Off Rogowski Coils!
900T Three-Phase Rogowski Coil Now £312.55
Shop: https://www.manutecheurope.com/.../rcs-900t-three-phase.../
The RCS-900T Three-Phase Rogowski Coil by Magnelab transforms an AC input current up to 5000 Amps to a 0.333 Volt output. The RCS-900T is a three-phase RopeCT kit that comes with 3 RopeCTs (Rogowski Coils) and one integrator (signal conditioner) that converts the RopeCT voltage to 0.333 volt AC output. The integrator requires a DC power supply that operates between 9 and 36 Vdc.