Central Building and Welding Academy

Call Directions Website Contact the business

Central Building and Welding Academy WE OFFER INTENSIVE CONSTRUCTION & WELDING COURSES.
📍Unit 1 Crondal Road Exhall Coventry
CV7 9NH We also offer a 1 day site safety course and CSCS test.

We have a range of intensive training courses
which run over 5 days or 2 consecutive weekends:

* Plastering
* Plumbing
* Tiling
* Bricklaying
* Carpentry
* Kitchen Fitting

We offer a range of Electrical courses which are Certificated by City and Guilds. We offer basic welding courses or coded, MIG, TIG or MMA welding.

Only a few Places left on our up coming 2391-52 Initial & Periodic Inspection & Testing course. The course covers the co...
06/11/2026

Only a few Places left on our up coming 2391-52 Initial & Periodic Inspection & Testing course.

The course covers the complete inspection and testing process through to certification, on single-phase and three-phase, new and existing installations. You’ll work in your own training bay with our equipment, or bring your own calibrated multifunction tester if you prefer.

Who can join:
To book, you’ll need your your NVQ, and to have completed Level 2, Level 3, and 18th Edition qualifications.

✅ 6.5 days: Monday to Friday, then the following Monday and Tuesday, 9:00 to 4:30
✅ Or evenings: Tuesdays and Thursdays over 5 weeks
✅ A practical exam with an assessor, a written assignment and an online exam
✅ A free re-sit if you don’t pass first time

Only a few places left on our next course, starting Monday 16 November. The next evening course starts Tuesday 17 November.

Not qualified yet? The route starts with our Basic Electrical course or the Level 2 Diploma.

Tap the link for dates and booking.

https://cbwa.co.uk/course/2391-52-initial-periodic-inspection-testing

#2391

Learn all the skills to do it yourself. Including learning to cut a worktop joint with a router and jig, on our Intensiv...
31/10/2026

Learn all the skills to do it yourself. Including learning to cut a worktop joint with a router and jig, on our Intensive Kitchen Fitting course in Coventry 🔨

Then it's fitting the units, hanging the doors and finishing the details, all in your own bay, the way it's done on a real job. The real skills to fit a kitchen yourself perfect if you've got your own home renovation project on the go.

Five days, or two weekends, beginners welcome!

📌 Save this for the day your kitchen needs doing.

📍 Coventry

29/10/2026

Our learner from Norway talks you through his own TIG weld on aluminium: too cold, just about acceptable, then too hot.

This was his first TIG course. Here's what he's juggling the whole way along the weld:

1. His left hand dabs the filler rod into the weld pool, then lifts it off at the right moment.
2. The rod must never touch the tungsten, the electrode that makes the arc. If it does, metal sticks to the tip and the arc goes erratic: it wanders, spits or cuts out completely, and it dirties the weld. The only fix is to stop and regrind it. He's done "plenty of regrinds".
3. The heat. Start too cold and the weld sits on top instead of melting in. As the metal warms up, he eases off the foot pedal, or the pool gets too big and collapses.

His verdict: it's a balancing game. "Practice, practice, practice," as our tutors kept telling him.

TIG aluminium is on our Basic Intensive Welding course for beginners, where you choose how many days to book. Give the office a call to book it.

Part 3 of 3. Missed the first two? They're on our page.

Which looks hardest to you: the rod, the tungsten or the pedal? 👇

📍 Coventry

Heads down in our Coventry plumbing workshop 🔧 Real pipework, real fittings, and a lot of concentration.Whatever you're ...
28/10/2026

Heads down in our Coventry plumbing workshop 🔧 Real pipework, real fittings, and a lot of concentration.

Whatever you're starting from, there's a route in: our Intensive Plumbing course (five days, or two weekends) for beginners, DIYers and home renovators, or Level 2 Plumbing for anyone retraining for a new career, with an evening option that fits around work.

Plumbing for your own home, or plumbing as a career: which would you pick?

📍 Coventry · link in bio

27/10/2026

TIG welding aluminium was the part he came all this way for. It was also the part that fought back.

Every welder has a pile of practice pieces they'd rather keep quiet about. He put his on camera.

Why aluminium is one of the hardest metals to TIG weld:

1. It doesn't glow. Steel turns red as it heats up. Aluminium gives you very little warning before it melts.
2. It soaks up heat, spreading it several times faster than steel. You need plenty of heat to get started, then less and less as the whole piece warms up. That's what the foot pedal is for.
3. It has a tough skin. The oxide layer on the surface melts at over 2,000°C, while the aluminium underneath melts at around 660°C. So it has to be spotless, and it's welded on AC, which breaks that skin up as you go.

That's why even experienced steel welders need practice before they switch to aluminium.

TIG aluminium is on our Basic Intensive Welding course, where you choose how many days to book. Give the office a call to book it.

Part 2 of 3. Missed Part 1? It's the post before this one!
Part 3 next week: he talks you through his own weld, from the cold start to the part he calls "just about acceptable". Follow so you don't miss it.

What's the hardest thing you've ever had to learn from scratch? 👇

📍 Coventry

23/10/2026

This learner lives inside the Arctic Circle in Norway. He came to Coventry for four days of TIG welding.

In midwinter he gets about two hours of twilight a day, and the sun doesn't clear the mountain opposite his home until February.

Coventry was a long way to come for a welding course, but in his words, "it was well worth the visit." He booked our Basic Intensive Welding course: you choose how many days and which process, aluminium included.

What's the furthest you'd travel to learn something new?

Coventry 📍 link in bio

coventry westmidlands

Consumer unit going in at our Coventry workshop ⚡ Or a fuse box, as most of us still call it.One of our electrical learn...
21/10/2026

Consumer unit going in at our Coventry workshop ⚡ Or a fuse box, as most of us still call it.

One of our electrical learners practising their wiring and installation skills. Getting it all neat takes a bit of patience — and keeps the tutor happy too!

You don’t need any experience to get started. We’ll take you from the basics and build up to jobs like this, step by step.

📍 Coventry · Electrical courses through the link in our bio

One word in this review stuck with us: “mindful”. Full review below⭐⭐⭐⭐⭐“Had an amazing experience doing tiling and plas...
16/10/2026

One word in this review stuck with us: “mindful”. Full review below

⭐⭐⭐⭐⭐
“Had an amazing experience doing tiling and plastering with Aaron as part of Kitchen fitting course. I did not realise before actually doing it how mindful and exiting tiling is. Looking forward to do my bathroom with the skills I gained.
He answered all weird and wonderful questions, and helped everyone with patience. For ladies considering learning DIY- please try CBWA it is interesting and fun”
— Madara, Google review, June 2026

Tiling and plastering are both part of our Kitchen Fitting course in Coventry, over 10 days or 5 weekends. Skills for the kitchen, and the bathroom after it. Course details are available on our website.

Which room would you tile first make sure to comment?

15/10/2026

TIG has a reputation as the trickiest welding process to learn. So we asked our learners how it’s really going 👇

One hand on the torch, the other feeding the filler rod, and a foot on the pedal controlling the heat. Both of our learners are getting to grips with the foot pedal, and you can see it coming together in our Coventry workshop.

New to the jargon? TIG, bead, foot pedal: we broke it all down in our Welding Decoded post. Find it on our grid 👉

Whether you’ve never struck an arc or you’re brushing up your skills, there’s a welding course for you. Link in bio.

💬 Have you ever tried TIG welding? Tell us below.
📩 Know someone who’d love this? Send it to them.

14/10/2026

What could you see yourself learning? 🧱🔧

From metalwork and bricklaying to carpentry and plumbing—a quick look at hands-on training in our Coventry workshops.

Whether you’re exploring a new career or want to develop your practical skills, follow CBWA for learner projects, workshop insights and a closer look at learning a trade.

Which trade would you like to try? 👇

Address

Unit 1 Crondal Road, Bayton Road Industrial Estate, Exhall
Coventry
CV79NH

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm
Saturday 8:30am - 5pm
Sunday 8:30am - 5pm

Telephone

+442476363663

Alerts

Be the first to know and let us send you an email when Central Building and Welding Academy posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Central Building and Welding Academy:

Shortcuts

Share