Ni Laser Cutting Services

Ni Laser Cutting Services Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Ni Laser Cutting Services, Engineering service, Carrakeel Drive, 15A Maydown Ind Est, Derry.

🔧 The difference between a good finished product and a reworked one starts at the cut.If your parts are coming back with...
01/06/2026

🔧 The difference between a good finished product and a reworked one starts at the cut.
If your parts are coming back with:
❌ Rough edges
❌ Wrong hole positions
❌ Profiles needing attention before welding
That's a cutting problem, not a fabrication one.
✅ Flat Bed Laser Cutting gives you accurate profiles and clean edges straight off the machine.

📩 Get in touch today and let's talk about a better way to do it.
[email protected] | nilasercutting.com

31/05/2026

🔥 Holes, slots and profiles cut directly into your tube.
Most workshops are still:
❌ Marking out box section by hand
❌ Drilling holes one at a time
❌ Losing hours before the welder even starts
✅ Tube Laser Cutting cuts holes, slots, tabs and contours straight into the tube.

The parts arrive at your workshop ready to weld.
📩 Talk to us today about your next project.
[email protected] | nilasercutting.com

⚙️ Sheet in. Finished parts out. Production keeps moving.That's how outsourcing your cutting should work.✅ Accurate ever...
30/05/2026

⚙️ Sheet in. Finished parts out. Production keeps moving.
That's how outsourcing your cutting should work.
✅ Accurate every time
✅ Faster turnaround
✅ More capacity when you need it
✅ Parts ready for the next stage
Flat Bed Laser Cutting takes the bottleneck out of your workshop, so your team moves straight into fabrication, welding or assembly.

📩 Contact us today to discuss what we can do for your production.
[email protected] | nilasercutting.com

29/05/2026

Your raw sheet goes on. Finished parts come off. Ready for your production line.
That's how outsourcing your cutting is supposed to work.
It's also what most fabricators aren't getting from their current supplier.
✅ Accurate profiles
✅ Clean edges
✅ Dimensions that match your drawings
Flat Bed Laser Cutting takes the bottleneck out of your workshop, so your team can move straight into fabrication, welding or assembly.

📩 Contact us today to discuss what we can do for your production.
[email protected] | nilasercutting.com

🔥 One pass on the Tube Laser replaces hours of drilling and marking out.Most workshops are still:❌ Marking out box secti...
28/05/2026

🔥 One pass on the Tube Laser replaces hours of drilling and marking out.
Most workshops are still:
❌ Marking out box section by hand
❌ Drilling holes one at a time
❌ Losing time before the welder starts
✅ Tube Laser Cutting puts holes, slots and profiles straight into the tube.

Parts arrive weld-ready. Production keeps moving.
📩 Talk to us today about your next project.
[email protected] | nilasercutting.com

27/05/2026

The difference between a good finished product and a reworked one starts at the cut.
❌ Rough edges.
❌ Wrong hole positions.
❌ Profiles that need attention before welding.That's not a fabrication problem. It's a cutting problem.
✅ Flat Bed Laser Cutting gives you accurate profiles, clean edges and holes exactly where your drawing specifies.Your team moves straight into the next stage.

📩 Get in touch today and let's talk about a better way to do [email protected] | nilasercutting.com

If You're Producing Brackets and Components in Volume, the Last Thing You Need is Inconsistency Across the Batch.Anyone ...
24/05/2026

If You're Producing Brackets and Components in Volume, the Last Thing You Need is Inconsistency Across the Batch.
Anyone running a production line on brackets, plates or fixings knows what happens when one part in fifty doesn't match the rest, the whole batch slows down while someone works out which ones can be used and which need redoing.
Flat Bed Laser Cutting delivers the same part the same way every time, whether you're ordering ten or ten thousand, with clean edges and hole positions that match your drawing on every single piece. That's the difference between a production line that keeps moving and one that keeps stopping.

Get in touch today and let's discuss what we can do for your production.
[email protected] | nilasercutting.com

The Gap Between a Raw Steel Sheet and Components Ready for Fabrication is Where Most Production Time Gets Lost.If your t...
23/05/2026

The Gap Between a Raw Steel Sheet and Components Ready for Fabrication is Where Most Production Time Gets Lost.
If your team is taking sheets through marking, cutting and finishing in house, you already know how much of the working week disappears at that stage before anything gets welded or assembled. Outsourcing your Flat Bed Laser Cutting closes that gap entirely, raw sheets go in at our end, accurate components come out and arrive at yours ready for the next stage of production. No marking, no rework, no hours lost on the cutting bay.

If this sounds like the problem you're dealing with, get in touch.
[email protected] | nilasercutting.com

If Your Components Need Holes That Line Up, Edges That Don't Need Grinding and Parts That Fit First Time, You Need a Cut...
22/05/2026

If Your Components Need Holes That Line Up, Edges That Don't Need Grinding and Parts That Fit First Time, You Need a Cutting Process That Was Built for That Job.
Plenty of suppliers can cut metal, but plenty of suppliers also send back parts with hole positions that are off, edges that need cleaning up and dimensions that don't match the drawing closely enough to use straight away. Flat Bed Laser Cutting was designed for exactly the kind of accuracy that production work demands, accurate hole patterns, clean edges and consistent results across the full run.

From a single prototype through to full production, the output stays the same. Find out what we can do for your production.
[email protected] | nilasercutting.com

When Your Enclosures and Housings Need to Fit Together Properly First Time, the Cutting Stage is Where That Job is Won o...
22/05/2026

When Your Enclosures and Housings Need to Fit Together Properly First Time, the Cutting Stage is Where That Job is Won or Lost.
Enclosures, panels and components that don't sit flush, line up at the fixings or close properly are almost always a cutting accuracy issue, not a fabrication one. Flat Bed Laser Cutting gives you ventilation patterns, fixing holes and panel profiles cut to the dimensions on your drawing, so when your team starts folding, welding and assembling, everything comes together the way it should. From one off enclosures to full production batches, the parts arrive ready to work with.

Contact us today to discuss your requirements.
[email protected] | nilasercutting.com

Address

Carrakeel Drive, 15A Maydown Ind Est
Derry
BT476UQ

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Ni Laser Cutting Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category